X96 MAX PLUS AMLOGIC S905X3 ANDROID 9.0 8K VIDEO DECODE TV BOX 2.4G+5.8G WIFI BLUETOOTH 1000MBPS LAN FIRMWARE UPDATED

[GeekBuying_Rep]

Hi,
Glad to share the updated firmware for X96 MAX Plus Amlogic S905x3 Android 9.0 8K Video Decode TV Box 2.4G+5.8G WiFi Bluetooth 1000Mbps LAN

This firmware is suitable for X96 Max Plus Amlogic S905x3 Android 9.0 TV Box of 4GB/32GB and 4GB/64GB.
PC Flash Firmware

Flash guide, please refer to:http://blog.geekbuying.com/2016/02/a...utorials-tool/


Have fun!

[svan1998]

Hi,
Glad to share the updated firmware for X96 MAX Plus Amlogic S905x3 Android 9.0 8K Video Decode TV Box 2.4G+5.8G WiFi Bluetooth 1000Mbps LAN

This firmware is suitable for X96 Max Plus Amlogic S905x3 Android 9.0 TV Box of 4GB/32GB and 4GB/64GB.
PC Flash Firmware

Flash guide, please refer to:http://blog.geekbuying.com/2016/02/a...utorials-tool/


Have fun!

Hi
what is version/date its firmware?
Best regards

[svan1998]

Hi, please answer.

[GeekBuying_Rep]

Hi, please answer.

Hi,
It is 20190625.

[Guest]

...
what is version/date its firmware?

It's a same firmware, as from product page - Support & Firmware tab.

[svan1998]

Thanks

[svan1998]

the device rebooted while watching Youtube. Now it is not loaded into the system, "Boot" is lit on the display of the console, it was very difficult to enter the recovery, there error "failed to mount cache/ invalid argument" . Flash passes through UBT successfully and without errors. What to do?

[ioncube]

So I purchased this AndroidBox from ZKMagic Aliexpress
https://www.aliexpress.com/item/4000...6da71e79qfWpRQ

...& here is my review

Following are MAJOR & minor bugs in this device:

# it is NOT a 64bit machine it's merely ARMv7A. 64bit is newer ARMv8A which isn't supported by this machine

# It doesn't have a stereo out 3.5mm audio jack. Additionally getting audio out of HDMI LED (to which the box is coupled) the volume is low ...best is to get a BT headphone (especially one that is compatible with it see details below)

# DATE/Time not retained by box on prolonged shutdown ...it's a severe bug may be bcz hardware clock is missing. If u have 24/7 internet access then this will not be a problem bcz clock will autosync

# install some floating Navigation bar to access & kill recent apps. its default Leanback GUI is very bad

# It's Bluetooth is really ****ed up! Some devices will not pair; some will. For instance I couldn't connect Anker Bluetooth & even my Nokia 6.1 but was able to connect Ipega 9077 & Mi AirBuds
Solution:
Access developer options by installing 3rd party shortcuts & tinker with Bluetooth AVRCP protocol version
https://talk.sonymobile.com/t5/XZ-pr...1367875#M17465

# Drag & Drop functionality isn't working, with MX2 Air remote
Solution:
https://forum.freaktab.com/forum/tv-...s905x2-devices

# A poor home launcher, bcz of the above even if u install 3rd party launchers u cannot customize it. ADW2 launcher is the best solution with drag & support

[soldiaz]

Can someone supply link to 2GB firmware?

[Guest]

Can someone supply link to 2GB firmware?

X96Max_Plus_S905x3_2GB_20191101_AndroidTVBox.eu.zi p

[soldiaz]

X96Max_Plus_S905x3_2GB_20191101_AndroidTVBox.eu.zi p

Thanks! I opened another thread for 2GB unit

[yakopsi]

I wanted to install magisk from twrpden device but root has gone as a result of the process. I can't install root right now. how can I do it?

I reset it to factory settings, but again no root.

[sparky57]

I have several of the x96 max plus2, newly purchased ( some came today ) and the wifi is not working properly. I did the ota updates and it's up to 20200620-1131. The wifi connects, speedtest reports the right speed. Everything seems ok until I try to run cinema or filelink,stremio, all vod apps. They load very slowly on each step. Filelink won't open at all. I'm highly invested and really need help.

[V@lo]

. I'm highly invested and really need help.

Welcome to our russian forum . Use translator, sorry it is russian language only

[soldiaz]

thanks! difficult to register there....could you share the TWRPs?