Announcement

Collapse
No announcement yet.

Custom Kernel for MK908II with USB-Ethernet Support [99% done, help required]

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Custom Kernel for MK908II with USB-Ethernet Support [99% done, help required]

    Hi everyone,
    I enabled the drivers for MCS7830 USB-To-Ethernet from D33 kernel source.
    It works fine, but one problem is that it gets stuck in the boot animation if I boot it with the USB-To-Ethernet connected. I need to let it boot completely first and only connect the USB-To-Ethernet.

    Does anyone know why it behaves like this? It is better than not having Ethernet working but still want it to be fully working.
    My compiled kernel can be found in the link below if anyone is interested.

    1. Original D33 Kernel Repo: https://github.com/Dee-UK/D33_KK_Kernel
    2. My Kernel Repo: https://github.com/Avasz/D33_KK_Kernel

    Thanks in advanced.

    #2
    Make it as Module only and load it in Android with insmod.
    That can do the Trick i think.

    Neomode

    Comment


      #3
      Originally posted by neomode View Post
      Make it as Module only and load it in Android with insmod.
      That can do the Trick i think.

      Neomode
      Thanks for the reply.
      Does that mean, I should not build the whole kernel?
      I am not sure of how to do that, can you point me to some links? I followed the guide[1] by d33 to build the kernel.

      [1] http://freaktab.com/forum/developmen...build-a-kernel

      Comment


        #4
        I found this guide[1], will try to follow this guide and create one next week and report.
        [1] https://sites.google.com/a/mtu.edu/m...android-system

        Comment

        Working...
        X