NAND Chip Mask ROM Mode Short Location

[obiobcool]

I had the same problem, I found that this new TX3 mini comes with Amlogic s912, I flashed mine with S912_atvXperience_v2FF Normal + LPDDR.rar it works fine now,

LAN and display not working on this ROM
Check the attached pic for short pin.


Regards

Thank you so much

but I think my device was fully bricked

[nith206]

Hello guys

I have an old tx3 mini without the mini logo on the box

the board is different from other tx3 mini board I’ve seen

it’s bricked do you know the pin location plz?

and what rom can I flash with this box

thank you very much and stay safe

Even I have the same board of Tanix tx3 mini hynix nand ver 1.1 , which pins to short ? I've bricked my box, please help

[JimmyD]

I have a problem while I was flash tx3 mini


Help me to find short pin please

I had the same problem, I found that this new TX3 mini comes with Amlogic s912, I flashed mine with S912_atvXperience_v2FF Normal + LPDDR.rar it works fine now,

LAN and display not working on this ROM
Check the attached pic for short pin.


Regards

[jplam89]

Hi everyone!
I have a bricked mxq pro4k with a board s905xq4_v3.0
Does anyone know the pins or the points where do the short??


Thanks a lot!

Juan.

[zakariach]

Hi
can someone help me short pin Magicsee N6 Max RK3399

[obiobcool]

I have a problem while I was flash tx3 mini


Help me to find short pin please

[Pandaii]

I have Z4 rk3368 2gb+16gb tv box.
While upgrading its bricked. now not detecting in PC.

Can someone help me with nand pin location?

[markshane]

Hi guys! So I bricked by HK1 Play 4/64GB flashing a ROM. The flash was successful using USB Burning tool, but the box was showing only red light when connected to TV. Tried to find the nand pins but failed and found this thread upon searching. Can someone please guide me how to short pin this box? It seems to be BGA board:

[nikos17m]

TANIX TX3 Max & Mini thread, post #194

Thank you very much

...there are many varietions of this box and not all of them accept same Roms...

TANIX TX3 Max & Mini thread, post #194

If a bootloader problem you can shortcut the memory while you connect the USB cable and it should be detected by your PC:

[nikos17m]

Hi nikos17m,

as per the image of your box, your board is Amlogic.

Pls try Amlogic burn card maker trick.

Follow the guide here : https://www.getdroidtips.com/downloa...rn-card-maker/

I am familiar with this method

the box is bricked and not working,first I must be able to connect to pc and then flash a correct firmware
I think it bricked because of the rom version I used
there are many varietions of this box and not all of them accept same Roms
thanks

[amitsan]

Hi nikos17m,

as per the image of your box, your board is Amlogic.

Pls try Amlogic burn card maker trick.

Follow the guide here : https://www.getdroidtips.com/downloa...rn-card-maker/

[nikos17m]

Hello guys

I have an old tx3 mini without the mini logo on the box

the board is different from other tx3 mini board I’ve seen

it’s bricked do you know the pin location plz?

and what rom can I flash with this box

thank you very much and stay safe

[amitsan]

First of all, thank you starting this thread to help noobs like me to revive their devices.

I have X96 Max X2 4gb+32gb tv box.
While upgrading its bricked. now not detecting in PC.

Can someone help me with nand pin location.

I am able to revive my machine by amlogic burn card maker.

Downloaded latest firmware for my machine & burn it to card by amlogic burn card maker & inserted into card slot & power on the device .

Voila, recovery menu started & installing firmware automatically, without any pin short or any intervention...After 10 mins installation completed & device booted..

[nikos17m]

Hello everyone
I manage finally to save my board.

short pin location is marked in the pic below
they are the 2 gold pins.