NAND Chip Mask ROM Mode Short Location

[Twisted714]

hello,
I have a streamsmart s4 S805 1g/8g is that bricked, the wi fi has AP6330 imprinted on it. the motherboard is labeled DL4 V1.1. i will try to upload a pic of the board.
I would like someone to tell which to short to clear the nv ram. i have an ota update in a zip file. does anyone know where i can find a recovery image?
I am stuck
any help?
Thanks

[brahner]

Prefix TX92-LP, motherboard CS_912_TX92_LP_V1.0, eMMC Samsung 32GB KLMBG4WEBC-B031. For Mask Rom close 17-18 pin

[Twisted714]

are all the nand pinouts the same? my nand is SK Hynix, my board is an s805

[Skirttles]

For the V88 Mini III wifi module SV6051P
just short the 2 dot's in the picture

[oceflat]

Cross-posting here as well:



Some help please? RK3229, 1gb/8gb, sv6051 wifi, XT-MX4N-V20 (either v88 or mxq-4k, see #427), PFF58-10AL NAND

[demon-345]

Short pins MXQ PRO 4K motherboard R329Q_V3.0
Under the N 8-9- or 9-10

does not work your method tried almost all contacts is not connected

[Rockabilly65]

does not work your method tried almost all contacts is not connected

have you tried 6-7 or 7-8 to at same time you hold the reset and power on, takes 1-2 seconds. I  use Android tool 2.35. You wish you had three hands, it's difficult but works
 

[demon-345]

ураааа завелась но почему то только андроид 7,1 хочет на него вставать

[demon-345]

cheers got wound up  but why is only the android 7.1 wants to get up on it

[demon-345]

Android 7.1.2

https://yadi.sk/d/weKOyhxQ3R9z4F

very slow

[Bully]

Originally posted by dionisor View Post


Solved!!!!!

Instructions:
1. Install Usb Burning Tool 2.0.9
2. Load GT1_706D0_AP6255 FW file
3. Check:
Erase Flash -> Normal erase
Erase bootloader
4. Press Start
5. Short pins and wait until device discovered and program start.

Good Luck!!!!

Is this the same for my GT1 ultimate

[rimasi98]

As anyone o knows the right shorting pins for Mecool M8S PRO L ?

Google is your friend. :-) http://freaktab.com/node/685682

[tiku]

Hi friends, My x96 is hanged on red light, and its not getting detected by using Using Amlogic\'s USB Burning Tool with all possible combination of pressing the reset-button, plugging in the USB cable to USB OTG-Port and plugging in the Power, can you please tell me which pins to short in my Nand Chip, i am having foresee nand chip inside, Thanks.

[mister]

tiku

[philip63]

Hello,

mine is a netbox V3 (s805) from Hexabyte (but seem simply be an ATV485 from Geniatech, see board rear view)

Anyway she not boot anymore since i flashed the eMMC with wrong firmware (see uart-console.png - no prompt).

eMMC (NAND) type KLM8G1WEPD-B031
socket FBGA-153

i guess the pins 17-18 have to be shortcircuited according some other posts based on other Samsung eMMC with same package FBGA-153;

but i would appreciate your opinions on this subject.
many thanks

Philip63