Thanks in advance!
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
NAND Chip Mask ROM Mode Short Location
Collapse
This is a sticky topic.
X
X
-
Originally posted by Krisobcy View Postyou have wrong software. you have to find this one thing. I had the same problem. the right ROM was loaded without a problem
Comment
-
Goodnight. I have a brick in a mecool m8s pro L. I made a bridge between the fifth and sixth pin but the tv box does not connect to the pc so only the blue light goes out. I followed the instructions you gave in this forum but it did not work for me. I've also realized that my nand is not samsung unlike the forum partner. I send you photos. Any ideas??? Excuse my english and thank you very much everyone for the good work you do all over the world
You may only view thumbnails in this gallery. This gallery has 2 photos.2 Photos
Comment
-
Originally posted by ccris View PostHello, is it possible to brick/broke the M8S PRO L if the wrong pins are shorted?
I tried every possible way to install a FW (SD/USB with 3 different cables), shorted the other pins after I found the other post (http://freaktab.com/filedata/fetch?photoid=686743) and there's no way to access the bootloader or start the Firmware flashing, it looks like the chipset (there's no Samsung branding like in the picture) is fried...
Thanks!
Comment
-
Hey guys, I've a (hard) bricked Mini M8S II SoC amlogic S905X (yeah I know, the chinese clone...), and I wasn't able to find anything about short the emmc nand chip (SanDisk SDIN9DW4-16G) to enter into recovery and flash a supported rom again. Does anyone in the forum has this PCB?? Thanks in advance!!You may only view thumbnails in this gallery. This gallery has 3 photos.3 Photos
Comment
-
Originally posted by khn993 View PostNow i fixed that error with this firmware https://drive.google.com/folderview?...2-o1ale0NvU7EX i found that in this forum.if u have exactly the same box like me u should pass 2%.that's wrong firmware file.After passing 2% i got other error.lowpower error,data transfer error at 7% and 17%.my procedure is first plug power cable to t95z not usb cable.in usb burning tool tick erase flash choose (force erase all)* and erase bootloader then click start and finally plug usb cable to pc first then to t95z.that's all done and wait until 100% burning success.parse burning image error is yeah some kind of data corruption.i pass that error by downloading firmware directly from chrome.dont use any downloader such as idm.btw my home made usb cable works great
Comment
What's Going On
Collapse
There are currently 9769 users online. 3 members and 9766 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Comment