NAND Chip Mask ROM Mode Short Location

[syked69]

ulas12 those links are not working
but either way, it would be good to specify which device you have?

[ulas12]

syked69



The font on the box SCISHION V88 4K
Mainboard: XT-MX4VR-V1.0

https://i.hizliresim.com/26r1pN.jpg

https://i.hizliresim.com/jg83dj.jpg

https://i.hizliresim.com/BarPjD.jpg

https://i.hizliresim.com/ZXZklk.jpg

Incorrect software installation does not see the computer device anymore


tried pins
5-6
6-7 ,
7-8

HELP MEE!!!!!

[syked69]

Need short location for t95z plus with SanDisk SDINADF4 - 32G chip

This has the same eMMC chip as my Tanix Tx9 pro and I managed to fix the Box

1) load aml burn tool
2) load known good firmware in tool (from box manufacturer)
3) click start 4) plug in usb cable to both PC and box
5) then Start shorting around this area. Can't tell you for sure which pins but I just worked my way up from the bottom

[syked69]

ulas12

still can't access your links .

Did you connect up the cable to the box and PC First then try to short the pins. I'm guessing you are using the latest batch tool?

I believe these are the pins

[ulas12]

ulas12

still can't access your links .

Did you connect up the cable to the box and PC First then try to short the pins. I'm guessing you are using the latest batch tool?

I believe these are the pins

I hold the pins first, then I wear the USB cable but it doesn't react at all. only red light is on

[syked69]

Plug the cable in first then try
Make sure you use original firmware

[ulas12]

Plug the cable in first then try
Make sure you use original firmware

original software
the computer device never detects
The device I guess died

[soldiaz]

Try to connect power supply AND USB, then short!

To avoid this in future if I understood right, you must untick erase bootloader in AMLOGIC tool, then burn. If unticked device wont be bricked in case you chose wrong firm.

[ulas12]

Try to connect power supply AND USB, then short!

To avoid this in future if I understood right, you must untick erase bootloader in AMLOGIC tool, then burn. If unticked device wont be bricked in case you chose wrong firm.

computer device but I can not find the original software MX4V on-V01

[soldiaz]

do you have fingerprint? I used to google for exact fingerprint since there are many firms for same looking device...

[soldiaz]

guess you need this: https://yadi.sk/d/weKOyhxQ3R9z4F


give it a try here: http://4pda.ru/forum/lofiversion/index.php?t763997-4240.html

[ulas12]

[QUOTE=soldiaz;n759350]guess you need this: https://yadi.sk/d/weKOyhxQ3R9z4F


give it a try here: http://4pda.ru/forum/lofiversion/index.php?t763997-4240.html


launcher stopped please others rom 5.0 Lollipop

1GB Ram

[soldiaz]

was it right firmware?

[ulas12]

was it right firmware?

software is installed but I get the system stopped error

[soldiaz]

Since the box is back to life you could boot to TWRP, right?

Then just look @4pda for firmware for your device