If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have the Zenoplige Z11 box. Inside is a TX3 PRO box (second photo).
I tried to update the firmware with sd card and firmware tx3 PRO, but when reboot I see red light and it's bricked.
I tried to connect it via USB with USB burning tool and I tried to short some pins without success.
Inside there is a NAND FORESEE NCEMASD9 08G.
Can someone help me with the procedure and pins to short to enter MASK Mode (so it is recognized by the PC)?
Thanks, I hope you can help me.
You may only view thumbnails in this gallery.
This gallery has 3 photos.
Hi there, I have a Alfwise A8 with a board XT-MX4vr-v01 2018-05-14
I've tried all the short locations for the 2017 board revision, but it just won't recognize on windows.
Can someone help me?
You may only view thumbnails in this gallery.
This gallery has 2 photos.
Need shortening pins as well for p212 board S905x CQ II (Shiningworth?)
Any help appreciated. Box turns on and can be used but due to missing root I cant flash anything. Bootcard method failed as well, no detection through burning tool...
Hi Soldiaz,
My Box is Anybox X1 also using S905X.
Please find file attached and trying shortening pins with mark Red color.
You may only view thumbnails in this gallery.
This gallery has 1 photos.
I am literally going crazy to find out which pin to short on this device. it's a RK3229 SV6051P. Not sure which model it is.
Please let me know which pin a need to short to bring it back to life again thanks a million.
thelinhlge thanks! Ill give it a try! Did it work for you?
Yes, It work for me long time ago. After trying flash ATVX version V2f, the Box working normal, but can't boot in to Recovery mode.
This is for your information.
What differences between recovery mod or download mod And world cup mod
I have a mibox shouted down
When I connect it to PC by usb cable on device manager i have "m8 Chip" uninstalled
But when I install Amlogic USB Drivers It changed to "world cup"
So is it Download mod?
What differences between recovery mod or download mod And world cup mod
I have a mibox shouted down
When I connect it to PC by usb cable on device manager i have "m8 Chip" uninstalled
But when I install Amlogic USB Drivers It changed to "world cup"
So is it Download mod?
Hi ,
first you have a Amlogic CPU , so you must use the Flashtool for AML CPUs ,
you can find it here and online , looks like you can connect your Box still the
stock Way , so you only need the right Rom , then you hopefully can restore
your Box with it , to be sure look for a good AML Flashguide and ask what to
do in one of the MiBox Threads from here , remember to correct configurate
the Flashtool (check/uncheck) the right Values ,
i am no AML Pro even a Dev. so to be sure always ask in the Threads ,
first you have a Amlogic CPU , so you must use the Flashtool for AML CPUs ,
you can find it here and online , looks like you can connect your Box still the
stock Way , so you only need the right Rom , then you hopefully can restore
your Box with it , to be sure look for a good AML Flashguide and ask what to
do in one of the MiBox Threads from here , remember to correct configurate
the Flashtool (check/uncheck) the right Values ,
i am no AML Pro even a Dev. so to be sure always ask in the Threads ,
good luck / report your results / gefattern
Thank you for answering
So you mean I don't need Mask ROM mode because my device already is in Mask mode??
I want to know , is Mask Mode like Download mode?
How can you be sure that your device is in mask mode?
Thank you for answering
So you mean I don't need Mask ROM mode because my device already is in Mask mode??
I want to know , is Mask Mode like Download mode?
How can you be sure that your device is in mask mode?
Hi ,
you have a AML CPU , not sure if it is called the same , MaskRomMode is used for
Rockchip Devices , it is only a Name , you can get into it , if you short special Pins
on your Nandchip , this only must be done if your Box is bricked and you can not
connect it the stock Way , Download Mode is the stock Way for AML Boxes , i think ,
if it is possible to connect your Box the stock Way , try this first , no need to use the
restore Modus of PCB , remember , you must have the correct Rom to flash ,
Mask ROM Mode is actually a feature of the NAND chipset (eMMC) to support factory setup when there is no bootable firmware found on the board. Every SoC manufacturer (Amlogic, Rockchip, Allwinner, HiSilicon, Qualcomm, etc.) supports it.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment