no nand chip on motherboard android box

[loojnkns]

I have a tobux t11 the chipset inside is coming up as mxqpro but it isnt, I am trying the pin short method but the box dosn't have anything that looks like a nand chip, is there anything I can do?
thanks

[gefattern]

I have a tobux t11 the chipset inside is coming up as mxqpro but it isnt, I am trying the pin short method but the box dosn't have anything that looks like a nand chip, is there anything I can do?
thanks

Hi ,

the Nand is the one beside the SDCard Slot , please post a good Picture of the other side

of PCB , a MXQPro is only another Box no Chipset , i think u have a MXQPro branded as

Tobox T11 , or whatever your Box is called , important is what CPU/GPU/Wifichip your

PCB has , to look for a working ROM , so please some more Pictures of both sides of

the PCB , nearby good light , not all PCBs have this soldered Pins on Nand , some Boxes

must be shorten another Way ,

greetings / gefattern

[loojnkns]

Thanks for helping,
sticker on board says G9CX_2_VO.95
printed on board says G9sx_VO.96 2016/11/23
amalogic chip says S905X
chip on the back of the board says 6RP47DgSHd
samsung chip says 640 kcm86rwepD-b031

I think this is the chipset CPU：Amlogic S802 Quad core ARM Cortex A9 2.0GHz

GPU: Octo-core Mali-450MP GPU @ 600MHz

[loojnkns]

quad core cortex A9r4 2ghz
octo-core mali 450
2gb ddr3 8gb flash
just found this I wrote it down from system info before I bricked box

[gefattern]

Thanks for helping,
sticker on board says G9CX_2_VO.95
printed on board says G9sx_VO.96 2016/11/23
amalogic chip says S905X
chip on the back of the board says 6RP47DgSHd
samsung chip says 640 kcm86rwepD-b031

I think this is the chipset CPU：Amlogic S802 Quad core ARM Cortex A9 2.0GHz

GPU: Octo-core Mali-450MP GPU @ 600MHz

Hi ,

you must look under Heatsink , if you not sure , between S802 & S905X is a difference ,

greetings / gefattern

[loojnkns]

no heatsink just a rubber pad, s905x

[gefattern]

no heatsink just a rubber pad, s905x

Hi ,

the Samsung is the Nand , i think , but your PCB has not the solder Pins , it must

shorten a different way , not sure how , good luck / gefattern

[loojnkns]

https://www.youtube.com/watch?v=fsyS3p5asZs

watch this and burning tool link is below video

you need the s905x image file

burn image usb male to male with your pc

you have to load image start then plug in cable whilst holding the rest button for a second

image file can be found here

http://firmware.mxqproject.com/files/firmware/Amlogic/S905X/TX5Pro-M9CMax/

tonbux t11 is the m9cmax

good website is mxq project

[gefattern]

Hi ,

good luck ,

gefattern