H96 pro plus 3/32 propably bricked need help

[drakman]

Hi guys,
I am new to Tv boxes.
My box is totally new only 2 days but suddenly stuck at boot (MBOX screen) I used all recovery options in recovery menu without luck.

I got the message (failed to mount/cache invalid argument) so I tried to flash my H96pro plus 3/32gb S32-V6(LPDDR3) 2017-09-05 blue PCB
via SD card with SCV4 ROM from Superceleron but the box get stacked on green android robot with an X next to it.
It was my mistake not read careful the instructions given that I had to use USB Burning tools to flash the ROM. I know that.
I thought that it will worked via SD because I read an other post with success.

Finally I made I made a usb cable around 20cm long and installed USB burning tools to proceed with this method.
The good news is that the box is connected on USB burning tool v2.0.8.

The bad news is that I already have tested a dozen different images without success,
Burning tools always stuck at 9% with the message UBOOT/Partition_aml_dtb/Verify Partition/Error result

I am afraid that I bricked my box. Is there a way to back in life??
Please if somebody can help me I would appreciate it. Thanks..

[jakk]

no solution bro.. my h96 pro + same too.. rip

[Gante]

This is a data transmission error. Use another usb cable.

[jakk]

This is a data transmission error. Use another usb cable.

thank you but i think this is not about usb cable.. i upgrade use sdcard.. and stuck 8% too ..

[Gante]

This is for MXQPro, but the procedure is the same as for diferent box.

http://4pda.ru/forum/index.php?s=&showtopic=723156&view=findpost&p=47159000

This solves this problem.

[jakk]

This is for MXQPro, but the procedure is the same as for diferent box.
http://4pda.ru/forum/index.php?s=&sh...ost&p=47159000
This solves this problem.

what usb cable that work bro?? 3.0?