T95Z Plus 3gb 32gb
I recently purchased the T95Z Plus 3gb 32gb
Tv Box through Amazon back in April 2018 of this year. In the 6 months that I have had it, I do not believed that I had used it 20 times and had not gotten more than 30 hours of total usage from the device before the device failed, before the end of September 2018 of this year.
The blue LED continues to come on, but nothing on the display, nor anything on the television screen. I've tried using the Amlogic USB burn tool to flash it, never getting any further than 7%. I've tried the SD Card Burner tool, in which the television screen began to show the Android robot, then an Upgrading progress bar, then it stops at about 7%, if even that much. I had even allowed the system to set over night to see if the progress bar would ever move, in which it did not. Then I added another file to the SD Card, then got the image of a dead Android robot and a list of errors. Along with this list of errors were the options of Reboot system now, Reboot to bootloader, Apply update from ADB, Apply update from EXT, Wipe data/factory reset, Wipe cache partition, Mount /system, View recovery logs, Run graphics test, and Power off, etcetera. I have tried every option on the list, and regardless of the option I chose, I only continue to get error messages. In the first photo, the first 3 files hightlighted in blue were the original files burned to the card in which I was getting the Android robot and the Upgrading progress bar that would stop at 7% The last 2 files were added to the SD Card that gave me the options and error messages as seen in the other photos. Is this device even saveable?
Tv Box through Amazon back in April 2018 of this year. In the 6 months that I have had it, I do not believed that I had used it 20 times and had not gotten more than 30 hours of total usage from the device before the device failed, before the end of September 2018 of this year.
The blue LED continues to come on, but nothing on the display, nor anything on the television screen. I've tried using the Amlogic USB burn tool to flash it, never getting any further than 7%. I've tried the SD Card Burner tool, in which the television screen began to show the Android robot, then an Upgrading progress bar, then it stops at about 7%, if even that much. I had even allowed the system to set over night to see if the progress bar would ever move, in which it did not. Then I added another file to the SD Card, then got the image of a dead Android robot and a list of errors. Along with this list of errors were the options of Reboot system now, Reboot to bootloader, Apply update from ADB, Apply update from EXT, Wipe data/factory reset, Wipe cache partition, Mount /system, View recovery logs, Run graphics test, and Power off, etcetera. I have tried every option on the list, and regardless of the option I chose, I only continue to get error messages. In the first photo, the first 3 files hightlighted in blue were the original files burned to the card in which I was getting the Android robot and the Upgrading progress bar that would stop at 7% The last 2 files were added to the SD Card that gave me the options and error messages as seen in the other photos. Is this device even saveable?