Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

iFive Mini 3GS RileyROM v1.6 and v1.7

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rrileypm
    replied
    Not that I know of....except that it may have something to do with the version of superuser. I picked the one we are using because it solved the write permissions to SD. But updates may have caused a problem.

    I don't have much time this week to play around with it, myself...until this weekend.

    Leave a comment:


  • sunyan1999
    replied
    Randy, Thanks for the reply. Any ideas that this can be fixed again?

    Leave a comment:


  • rrileypm
    replied
    It has been quite a while since the last firmware version of this tablet was released. I've found that over time, certain Google updates become incompatible with the firmware. I've run into the same problems.

    The compatibility issues seem to center around the write permissions to internal/external storage. I thought that in the last ROM that I applied the required fixes to enable read/write permissions to storage...but over time, this has changed....possibly from a Google Services update.

    Leave a comment:


  • sunyan1999
    replied
    Randy, I have installed v1.7, and it seemed to run fine except a few things. First, when I tap settings->about tablet, then it says Settings has stopped. The other problem is google plya books and kindle apps always crashes. This is quite frustrating to me, since I like to use the tablet to read books. Can you help?

    Leave a comment:


  • Benningmk
    replied
    I could flash the Rom, but bevor i cant backup imei and nvram.
    After first start usb debugging activate and i could connect to mtk droid.
    There stands no imei and in wlan settings there i get nvram error and wlan does not work.

    Leave a comment:


  • Benningmk
    replied
    When i started the tab then it comes an lockscreen. So i cant go into the settings to activate usb debugging.

    Without debugging i dont get my tab connect with mtk droid tools, but i must made my nvram and imei backup.

    Leave a comment:


  • rrileypm
    replied
    Have you followed the procedure stated in the "First Time User's Guide"?

    I'm not sure what you mean by "lock field".

    You need to get into flash mode, not recovery mode.

    Leave a comment:


  • Benningmk
    replied
    Hey...
    I have got an ifive 3gs from an friend with some issue.
    When i start up, i get an lock field. I dont know the key.

    I want to install your Rom, but without usb debugging, i cant use Flashtool or MTK droid.

    When i Boot into Recovery there stands:
    Android System recovery
    F401_ifive_mini_3GS_442_V1.1.1_20140815

    Is there anyway to get this tablet working?

    Sorry for my bad english...

    Leave a comment:


  • rrileypm
    replied
    I will do some testing when I get back home from vacation.

    Leave a comment:


  • luon
    replied
    Hi, thank you for this great firmware
    Can u add cifs and ntfs support to the ROM?
    It would be appreciated. thanks

    Leave a comment:


  • rrileypm
    replied
    iFive has configured their firmware to combine userdata with the user app partitions. So, at least on my tablet, you have the same amount of space for apps as you have for the internal SD. Early firmware versions didn't have this feature. That's why I haven't included EBR files with this ROM.

    Also, I haven't had time to test the alternate boot.img file I made that swaps the internal/external SD. I'm not sure what affect it will have on how the system runs....since user app space is combined with the internal SD space. It may be that you would need to do a complete wipe/format upon flashing the ROM to get the required files and folders to be added to the external SD card (which would also erase everything from the external SD). Otherwise, by just swapping the mount locations of the SD card storage, you my loose your ability to run apps that are installed on the tablet already. That's just something to consider if you want to try swapping internal and external SD's.
    Last edited by rrileypm; 05-13-2015, 18:26.

    Leave a comment:


  • i1fang
    replied
    How to change the size of the User App Space?
    There is no EBR2 in ROM components......

    Leave a comment:


  • hangy
    replied
    hi, after a full wipe and upgrade rom to riley 1.7 my tablet after the boot show me a privacy password protection and ask me for a pin... also without a sim card installed.... how to go on?

    please help me...

    Leave a comment:


  • rrileypm
    replied
    By request, I have an alternative boot.img file that swaps the internal and external SD cards. See the link to it at the bottom of post #1.

    Leave a comment:


  • rrileypm
    replied
    I'm aware of both of those bugs. I can't seem to figure out the settings crash...it only happens when you touch the "about" menu item.

    I did find that if you choose a Live wallpaper, it works. But my solution is to use Apex Launcher...it's much better than the stock launcher.

    Leave a comment:

Working...
X