Bluetooth/GPS/USB host on Archos 80 Cobalt?

[chrisund123]

Has anyone got any gen on whether or not the Cobalt can support Bluetooth or GPS via USB host? I've noticed while browsing through the system area there are loads of files referring to Bluetooth so this looks promising, but I'm far too much of a luser to know what it all means.

I saw some people on HUKD had tried a usb bluetooth adapter without much success, I was wondering if anyone had a definitive answer as to what it can/can't do over USB currently, and what it may do in the future perhaps with some kernel tweaks?

[chrisund123]

Well another user has plugged in a USB Bluetooth dongle and gotten this:

hey look at this i change my keyboard/mouse dongle with my old belkin bluetooth and it recognize
<6>[ 2484.456051] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[ 2484.456376] DWC_OTG: Init: Port Power? op_state=1
<6>[ 2484.456402] DWC_OTG: Init: Power Port (0)
<6>[ 2485.181410] usb 1-1: new low speed USB device number 3 using usb20_otg
<6>[ 2485.400570] usb 1-1: New USB device found, idVendor=04d9, idProduct=2519
<6>[ 2485.407631] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 2485.418569] usb 1-1: Product: 2.4GHz receiver
<6>[ 2485.423118] usb 1-1: Manufacturer: Shenzhen LogoTech
<6>[ 2485.444190] input: Shenzhen LogoTech 2.4GHz receiver as /devices/platform/usb20_otg/usb1/1-1/1-1:1.0/input/input3
<6>[ 2485.445092] keychord: using input dev Shenzhen LogoTech 2.4GHz receiver for fevent
<6>[ 2485.445121] generic-usb 0003:04D9:2519.0001: input: USB HID v1.00 Keyboard [Shenzhen LogoTech 2.4GHz receiver ] on usb-usb20_otg-1/input0
<6>[ 2485.454164] input: Shenzhen LogoTech 2.4GHz receiver as /devices/platform/usb20_otg/usb1/1-1/1-1:1.1/input/input4
<6>[ 2485.454722] keychord: using input dev Shenzhen LogoTech 2.4GHz receiver for fevent
<6>[ 2485.454749] generic-usb 0003:04D9:2519.0002: input: USB HID v1.00 Mouse [Shenzhen LogoTech 2.4GHz receiver ] on usb-usb20_otg-1/input1
<4>[ 2490.574130] UMP<2>: New session opened
<4>[ 2496.123753] UMP<2>: New session opened
<3>[ 2496.682427] init: untracked pid 2489 exited
<6>[ 2688.581062] usb 1-1: USB disconnect, device number 3
<6>[ 2691.800995] usb 1-1: new full speed USB device number 4 using usb20_otg
<6>[ 2692.028501] usb 1-1: New USB device found, idVendor=0a5c, idProduct=200a
<6>[ 2692.035294] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 2692.042535] usb 1-1: Product: Belkin Bluetooth Device
<6>[ 2692.047613] usb 1-1: Manufacturer: Broadcom
<6>[ 2692.052048] usb 1-1: SerialNumber: 000A3A63DBAD
app_57@android:/ #

Anyone got any ideas if this is useful and can be made functional?