Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Arnova 10b G2 Capacitive - Finless Bob's "GingerComb" ROM Version 2.1 CWM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • shrekkone
    replied
    i'll update to

    thanks for yr job Bob i'll update soon as possible

    Leave a comment:


  • sergi12
    replied
    kernel loop device

    Is the kernel suports loop devices?
    is not, is posible to do?

    thanks

    Leave a comment:


  • FaTa1-Err0r
    replied
    Originally posted by Finless View Post
    Yes I plan to do a 2.2 for all my ROMs time permitting.

    Bob
    thanks, can't wait :-)

    Leave a comment:


  • Finless
    replied
    Yes I plan to do a 2.2 for all my ROMs time permitting.

    Bob

    Leave a comment:


  • FaTa1-Err0r
    replied
    Will the 2.2 build come to this tablet? I would really like initi.d support for the scripts :-)

    YOU ROCK!

    Leave a comment:


  • mpiter
    replied
    After the 1.5 ROM I put the 2.1 for my father in law. The result is fantastic. I have checked a little bit the stability of the system and several people have used it here during a few days without problems. Thanks a lot for the ROM.

    Leave a comment:


  • axiskhan
    replied
    Hello Bob, Everything is fine, with this new 2.1 it works faster than previous one and i can also play with Ice Age Village from "google play". Aldiko premium works well too, the hacked one of course .
    I want to thank you for you and your team as usual you do a good job
    You deserve to go on vacation this summer

    Leave a comment:


  • arcsky
    replied
    Sorry I didn't mention this in my first message, I already turned off everything related to mobile network. May be it is this mobile network includes wi-fi usage? I'll try not to use wi-fi and see if mobile network will use main part of the charge.

    Leave a comment:


  • Damo
    replied
    These mobile network settings can be switched off in the WiFi settings. There is on battery info included in the settings we have one of our devs looking into this but if you install Anycut from the market you can create a shortcut on your homescreen that will give you that battery usage information

    Sent from my SK17i using Tapatalk 2

    Leave a comment:


  • arcsky
    replied
    It's great!

    Thanks, it's great!
    Just one question, sorry if it's dumb. Now tablet seems to discharge faster. Battery use (not accesible form About device menu, it's ok?) shows that main part of charge was used by mobile radio (mobile standby), and "time without signal" is 100%. Is it ok? cuz I don't have any modem connected to my tablet

    Leave a comment:


  • mysticwave
    replied
    Thank you

    Thank you very much!
    I just bought a Arnova 10b G2 and installed your rom and it's just great!

    Leave a comment:


  • Damo
    replied
    Originally posted by priamov View Post
    I've just install this rom but I'm having an error on the screen.
    On first boot the screen is not responding, I do a reset and works, after switck off i doesn't work, and need a reset to make it work again.

    Any sugestions.
    When you flash the Rom when it reboots you need to reboot again immediately or your screen gets corrupted. If you didn't do this than re flash and start again.

    Remember on the flash tool select the loader add erase Idb before you start

    Sent from my SK17i using Tapatalk 2

    Leave a comment:


  • priamov
    replied
    Calibration error

    I've just install this rom but I'm having an error on the screen.
    On first boot the screen is not responding, I do a reset and works, after switck off i doesn't work, and need a reset to make it work again.

    Any sugestions.

    Leave a comment:


  • mpiter
    replied
    I am trying Boat Browser on my smartphone before putting it on the tablet. It is amazingly fast.

    Leave a comment:


  • Damo
    replied
    I find dolphin very slow anyway

    Try Boat Browser or Opera mini

    Sent from my SK17i using Tapatalk 2

    Leave a comment:

Working...
X