[Custom KK kernel dev] U30GT2

[d33]

i've built a custom KK kernel for the U30GT2.

U30GT2 v1.03 (superceded)

U30GT2 v1.25 ('Stock' settings, Antutu 5.5 -> 24,261)
U30GT2 v1.26 (lower voltages & 1.7 GHz CPU/667 DDR, Antutu 5.5 -> 25,606)


Please provide a DMESG if you have any problems and I'll try to fix. Works 100% for me on my ROM builds but I know the Wifi doesn't work on the beta3 ROM for some reason.

[d33]

No-one interested?

[d33]

Improved kernel uploaded - see OP

[cubelibre]

hi d33 .
I think you should know that there are two versions Cube U30GT2 !
I saw your post before and pins that you wrote
here they are , and your chipset THC63LVD827 LVDS

I have a revision of the chip SSD2828NQ4 MIPI
Here dump pins

It's not all differences
your lcd B101UAN02 LVDS
my lcd CLAA101FP01 MIPI

I hope this information will help you create one universal kernel
best regards cubelibre from 4pda.ru

[d33]

hi d33 .
I think you should know that there are two versions Cube U30GT2 !
I saw your post before and pins that you wrote
here they are , and your chipset THC63LVD827 LVDS

I have a revision of the chip SSD2828NQ4 MIPI
Here dump pins

It's not all differences
your lcd B101UAN02 LVDS
my lcd CLAA101FP01 MIPI

I hope this information will help you create one universal kernel
best regards cubelibre from 4pda.ru

1. gpio0 160 poweronpin
2. gpio0 164 play
3. gpio0 165 rk903_26M_wake_host
4. gpio0 173 rtc gpio
5. gpio0 174 [auto]
6. gpio0 175 gs_lsm303d
7. gpio0 188 camera_flash_mode
8. gpio1 195 rk903_26M_rts
9. gpio2 231 wifi reset
10. gpio3 257 sdmmc-power
11. gpio3 268 camera powerdown
12. gpio3 269 camera powerdown
13. gpio3 278 rk903_26M_wake
14. gpio3 279 rk903_26M_poweron
15. gpio3 280 wifi_power
16. gpio3 281 rk903_26M_reset
17. 
    

versus

1. 160 : poweronpin
2. 162 : bl_en
3. 164 : play
4. 165 : rk903_26M_wake_host
5. 167 : ssd2828_reset
6. 168 : ssd2828_vddio
7. 172 : l3g20d_gryo
8. 174 : GTP_RST_PORT
9. 183 : camera flash
10. 188 : ssd2828_spi_miso
11. 189 : ssd2828_spi_mosi
12. 190 : ssd2828_spi_sck
13. 191 : ssd2828_spi_cs
14. 195 : rk903_26M_rts
15. 196 : rtc gpio
16. 205 : [auto]
17. 207 : ct363_irq
18. 231 : wifi reset
19. 257 : sdmmc-power
20. 268 : camera powerdown
21. 269 : camera powerdown
22. 278 : rk903_26M_wake
23. 279 : rk903_26M_poweron
24. 280 : wifi_power
25. 281 : rk903_26M_reset
26. 284 : ssd2828_shut

As you can see they are totally different - would need a separate kernel build. Actually looks like an Pipo M9Pro

Completely different screen (only one can be built in), LVDS vs Mipi (see ssd2828), gyro on different pin, camera on different pin.

[cubelibre]

hi d33
maybe you compile your kernel?
I agree to be your beta tester.
Here is the log from the kernel # 352 KitKat .
dmesg_#352_kernel.txt

ps
I ask you to add in your (LVDS) kernel , driver for Goodix GT928 .
Some tablets come with this chipset .

best regards