TELEFUNKEN Tablet Root discussions

[Finless]

OK what..... No status? I am on pins and needles here hoping this ROM works out

I realize the time zones so just messing with you Arka

Bob

[Arka]

Sorry for the late reply but as u said due to the time zones...

Yesterday I tried to put the tablet on flash mode without success!
The tablet has only one button power and reset...after it has soft buttons: home, menu and back but they are like sensors when the tablet is on...I dont know if you understand what I mean

I have tried plenty of combinations:
Pluged + usb + holding reset and power...relaising reset
Pluged + usb + holding power...relasing power
The same only with reset
Pluging usb later when Im holding
The same plus the diff combo of soft buttons

Nothing! Quite frustrated since I tried during almost two hours :banghead:

A funny thing but doesnt do anything...
With the tablet on if type from the PC adb shell recover I can see for an instant the recovery menu on the tablet screen..but I cant do anything with it no access. For info the recovery version is 1.3.37

So any ideas??.I tried to find combinations without no successs

And Im leaving for the weekend so I wont be able to give any status till Monday sorry

Thanks a lot guys for your efforts...sure that we will succeded or I break the tablet trying

Arkaitz
Sent from my GT-I9100 using Tapatalk 2

[pjrollo2000]

if you have a sd card installed try taking it out then try again i have to take my sd card out to get it to work on the freak tablet

[Arka]

if you have a sd card installed try taking it out then try again i have to take my sd card out to get it to work on the freak tablet

I thought about it and I have tried with and without same result

definitively I am doing something wrong

[Finless]

Arka, so I assume I wasted my time?

There HAS to be a way to go into flash mod. This is just about the only way to flash a ROM so I know for sure it is there.

So any luck yet?

Bob

[Arka]

Working!

Sorry for the big delay but it took me forever to know how to put the tablet in flash mode, I didnt know that there was another reset button hidden behind the back lid

To put the tablet in flash mode:

1.- Remove back lid (it is easy to remove like a normal phone, only with your nails, close to power there is lock switch it in the unlock side before to pull)
2.- Connect tablet to the computer
3.- Once the lid is out, close to the power button there is a reset button before it was hidden, with a pin push the reset button + power

Now the computer should be asking for the drivers!

Thanks Bob and Daman!!! , Finless Rom 1.2 is working 100% and the boot screen is very cool

Arka, so I assume I wasted my time?

There HAS to be a way to go into flash mod. This is just about the only way to flash a ROM so I know for sure it is there.

So any luck yet?

Bob

[Damo]

Sorry for the big delay but it took me forever to know how to put the tablet in flash mode, I didnt know that there was another reset button hidden behind the back lid

To put the tablet in flash mode:

1.- Remove back lid (it is easy to remove like a normal phone, only with your nails, close to power there is lock switch it in the unlock side before to pull)
2.- Connect tablet to the computer
3.- Once the lid is out, close to the power button there is a reset button before it was hidden, with a pin push the reset button + power

Now the computer should be asking for the drivers!

Thanks Bob and Daman!!! , Finless Rom 1.2 is working 100% and the boot screen is very cool

Brilliant well done and thanks for the instructions on how to get it into flash mode :thumbup:

Sent from my SK17i using Tapatalk 2

[Finless]

Is it possible once you take it apart to drill a pin hole in the case so you do not have to take it apart again?

Bob

[Arka]

To drill a hole is not a bad idea but to remove the lid is not that difficult...its truth that in my case I am not flashing a new row everyday

I know that you said no already but I can not try any ICS rom in my tablet, can I? how I know now how to flash back without any problem

[Finless]

Arka, so how is this ROM working out now that you have had it for a while?

Anything more you want me to do to it?

Bob

[Arka]

Hey Bob,
Everything is working great

Im trying to get an ICS rom from the manufacturer for this tablet but not success so far

Thanks again for yout help

Arkaitz

Sent from my GT-I9100 using Tapatalk 2

[dragonkvm]

Hi Guys,

I want to confirm if the rom in this thread is for a Telefunken TPAD-100A3GEC?
I used the rom to flash mine, and everything went well. No errors, but the touch screen doesnt work.

Karel

[dragonkvm]

Guys any help pls????

EDIT:: Ok so I have the 10"

http://www.4home.co.za/index.php?page=shop.product_details&product_id=2572&flypage=flypage.tpl&pop=0&option=com_virtuemart&Itemid=90

Is there anyway I can fix it?

Karel

[Finless]

I honestly have no clue! I simply rooted this ROM for Arka. He provided the stock ROM and I rooted it. I do not own or have this tablet so I really have no clue what all it maybe compatible with.

If you have a stock ROM form what you have, I can certianly try to make a ROM for you. But without a stock ROM you know works on your tablet, nothing really I can do.

Bob

[dragonkvm]

HI Bob,

This was because of my own stupidity...... I should have made a backup of the origional rom.....
Yours doesnt work, because its for an 8" and Im sitting with an 10".

This seems like the right one?

http://www.zenithink.com/Eproducts_Z101.php

Thanx Karel