CHERRYPAD TURBO (ROM DEV HELP)

[pancoi23]

Cherry Pad Turbo specs:
7-inch capacitive display w/ 800x450 resolution
1.2GHz Rockchip processor
512MB RAM
4GB internal storage
up to 32GB via microSD
WiFi 802.11 b/g
Bluetooth 2.1
Android 2.3 Gingerbread

here is the update image http://www.mediafire.com/?jye1c7bwynzmy55
and here is the complete files http://www.mediafire.com/?jp3s3n81kom4l

I hope someone could help me

[Finless]

BETA 1 is ready!

OK so this was a pretty standard GingerBread RK29 ROM.
System was CRAMFS read only.

Here is the BETA 1 ROM. It is a BETA because I cannot fully test this. It boots on my Arnova 10G2 but of course the screen etc does not work. I know it's not a brick ROM as it does boot.
So! You will be a tester for this ROM! Understand this please!

I have converted all the file systems to FAST EXT4. System is now Read and Write.
It's fully rooted with SU and superuser.apk

I have not debloated the ROM but will if you tell me what APPs to remove.

I have also added ClockWork recovery. However I cannot test it. This clockwork supports buttons and touch screen for menu manipultion. Again though I do not know if it works as I cannot test it. It does boot properly into CWM. Please let me know if the touch screen works.

In the ROM is a readme. The instructions are for the nextbook. I need help with the instructions for how to enter flash mode and CWM. So please if you can help others by helping me update the instructions that would be great!

Here is the BETA 1 download.

ROM -> CherryPad Turbo - Finless ROM 1.3 - Full Root, EXT4 and ClockWork Touch (145 megs)

Let me know how it goes please,
Bob

[pancoi23]

Amazing

wow! that was fast Bob! I'm downloading it right now and will give it a try right away once the download is finished. Yes, I will give feed backs and will update the readme/instruction in the ROM for you ^_^. Again thank you so much for this Bob. I hope we can make it through 4.0 ICS.

[pancoi23]

it's working!

It's working Bob! I will Play with it and see if I get any problem.

- sound > ok
- touchscreen > ok
- wifi > ok
- Blootooth > ok

Your'e the man Bob! This is Great! You are Great!

[pancoi23]

Question

Hi Bob , Can I install chainfire 3d in this ROM? I tried it before but it didn't boot after the reboot.

[Finless]

Probably not, It depends what screen drivers they used in the stock ROM.

Bob

[pancoi23]

Probably not, It depends what screen drivers they used in the stock ROM.

Bob

Okay, Thanks Bob. Hmmm.. How about sending sms through a usb modem? is it possible? I know this is off the track but maybe you can suggest an application or something for this. I know your busy, I really appreciate your time

About the debloating, here is the list:
-browser
-cherry messenger
-cherry shop
-voice dialer and
-voice search

Thanks Bob

~punkz

[pancoi23]

Booting into flash mode

Steps:

1. Power off your cherry pad Turbo (CPT)
2. Connect your CPT to your PC while holding the +volume.

There you go. your in flash mode. By the way I used this Tool http://www.mediafire.com/?1jiui23vsc21oax for the meantime because Bob's tool doesn't seem to work on my cpt .

[pancoi23]

[Request] Telephony feature

Hi Bob, Can you add telephony feature for this ROM? is it possible? sending sms and making calls via 3G dongle. ^_^

~punkz

[Finless]

Probably not without 3G kernel module KO drivers made for your kernel.

Bob

[pancoi23]

[QUESTION]

Bob,

Hi
What's the sdk verion of this ROM?

~punkz

[Finless]

It's right in your build.prop file

ro.build.version.sdk=9



Bob

[pancoi23]

honeycomb or ICS

Is it possible Bob?

[pancoi23]

How to enable Swap?

Hey bob, still there? I just wan't to ask you if is it posible to enable swap in this device?

[thachad098]

You're a life(tablet) saver

thanks to your work, my tablet was able to escape the infinite boot-loop. you're just awesome!