Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Lava Xtron without HDMI
Collapse
X
-
Battery not charging!
Anucha...I tried your v2 ROM on Extron and the battery icon though shows charging sign, the percentage stays at the point of flashing the ROM....It stays at 31% in spite of long time of charging...Any work around?? The ROM is very good. So if you can suggest a solution, I plan to use it...Will the updated kernel that you have provided do the trick??
-
Originally posted by pradipsoman View PostHow can I swap the internal and external SD memories to store games on the external SD? Is it the same procedure i.e editing vold.fstab?
before edit, must to backup everything in sdcard and external_sd to PC
use root explorer edit as text editor follow this
dev_mount flash /mnt/external_sd auto /devices/virtual/mtd/mtd9/mtdblock9
dev_mount sdcard /mnt/sdcard auto /devices/platform/rk29_sdmmc.0/mmc_host/mmc0 external_sd auto
dev_mount udisk /mnt/usb_storage auto /devices/platform/usb20_host/usb /devices/platform/usb20_otg/usb
-safe and check permission to rw-r--r-- or 644
-reboot.
-after reboot connect tab to pc erase everything in two drive and copy backup to sdcard and external_sd from PC to tab (already swapped).
*trick and tip*
memory card should format and setting to
File system = fat32
Allocation unit size = select large size, 32 or 64 kilobytes, It make r/w data to fast and reduce lag.
Leave a comment:
-
How can I swap the internal and external SD memories to store games on the external SD? Is it the same procedure i.e editing vold.fstab?
Leave a comment:
-
Sample to use Xposed installer and setting Gravity box
to make like KitKat UI for rom "AnasDroid V.2b_update1"
and must change Launcher to Google now Launcher
edit:
Update
Add_Kernel_Module for "AnasDroid V.2b_update1"
Read How_to.txt
Last edited by Anucha; 03-17-2014, 13:06.
Leave a comment:
-
Originally posted by pranjal59 View PostJust try cyanogenmod 10.1 by oma on xtron non-hdmi.
It works absolutely flawlessly with stock kernel and cwm recovery from androtab.info but with a few bugs as follows
1. Wifi tether doesn't work
2. Camera is laterally inverted.
3. Battery drainage issue in sleep mode though I found a work around which may sound odd
WORKAROUND: play music on your device on repeat mode. Put it to silent. Lock the device.
By this method we get as low as 4% battery drain in 8 hours.
@Anucha
Can you suggest anything about wifi tether and camera problem.
I tried using modules from stock rom but it results in bootloop.
you can try this
edit:
If you lose camera icon in App drawer, to use nova launcher.
long press on home screen >shortcut>Activities>Gallery>camera.
you will have camera icon on home screen.
edit 2:
If not show "Not charging" when you plug in charger.
try this kernel to solve it
edit 3:
Now. I cancel this project (CM 10.1 ) because it have more problem of battery drain is fast and low performance in OpenGL 2.0Last edited by Anucha; 03-12-2014, 05:51.
Leave a comment:
-
cyanogenmod for xtron
Just try cyanogenmod 10.1 by oma on xtron non-hdmi.
It works absolutely flawlessly with stock kernel and cwm recovery from androtab.info but with a few bugs as follows
1. Wifi tether doesn't work
2. Camera is laterally inverted.
3. Battery drainage issue in sleep mode though I found a work around which may sound odd
WORKAROUND: play music on your device on repeat mode. Put it to silent. Lock the device.
By this method we get as low as 4% battery drain in 8 hours.
@Anucha
Can you suggest anything about wifi tether and camera problem.
I tried using modules from stock rom but it results in bootloop.
Leave a comment:
-
Here is link to download
AnasDroid V.2b update1
**unzip file in PC
**install driver
#How to flash rom
1. backup everything if you want,
2. connect tablet to PC (press vol+)
3. open RKandroidtool 1.35 and follow to see pic 1
4. wait to finish.
#If you want to install CWM recovery
1. connect tablet to PC (press vol+)
2. open RKandroidtool 1.35 remove tik to all item and follow to see pic 2
3. wait to finish
4. Now you have CWM recovery.
good luck.
Anucha
*note : I want for your feedback/report problem to here. thank you.
Leave a comment:
-
Originally posted by pradipsoman View PostAm using your 4.1.1 and it works great! Will your 4.2.2 work with my Lava Xtron?? Sound and wifi??
Leave a comment:
-
Originally posted by Anucha View Post##Solved for icon wifi ##
Leave a comment:
-
Originally posted by Anucha View Posthi cooljay5
Sorry for the very late reply.
Now. I just made JB 4.2.2 SDK2.0 multiUser custom rom on scopad SP0718.
All worked. wifi icon in gray color and not show level signal but have show 2 little arrow data in-out.
Don't worry for wifi icon because network no problem. It is work good every thing .
See picture on link.
01 02 03 04 05 06 07 08 09 10 11 12
It is in test build, if you want to test my custom rom I will sent link to you.
Thank you.
Anucha.
Leave a comment:
-
hi cooljay5
Sorry for the very late reply.
Now. I just made JB 4.2.2 SDK2.0 multiUser custom rom on scopad SP0718.
All worked. wifi icon in gray color and not show level signal but have show 2 little arrow data in-out.
Don't worry for wifi icon because network no problem. It is work good every thing .
See picture on link.
01 02 03 04 05 06 07 08 09 10 11 12
It is in test build, if you want to test my custom rom I will sent link to you.
Thank you.
Anucha.Last edited by Anucha; 02-24-2014, 03:51.
Leave a comment:
-
Please post more custom ROM's!!!
Originally posted by Anucha View PostBattery calibrate App have already in rom.You can use it to calibrate.
How to.
1. Open app
2. connect charger in tab.
3. Wait for 100%
4. select calibrate=>OK. disconnect charger.
5. When battery is warning to low. Make all again to 2-3 times.
Dear Anucha,
Your ROM is working awesomely on the X-TRON Tab. Please post more custom rom's I'm ready to test and try... Thank you for your hardwork!!!!
Leave a comment:
-
Originally posted by Anucha View PostBattery calibrate App have already in rom.You can use it to calibrate.
How to.
1. Open app
2. connect charger in tab.
3. Wait for 100%
4. select calibrate=>OK. disconnect charger.
5. When battery is warning to low. Make all again to 2-3 times.
Leave a comment:
-
Originally posted by cooljay5 View PostDear Anucha,
Thanks for this wonderfull ROM, finally I succeeded in flashing your ROM through RK batch tool file. Everything is awesome, but I think, the battery is draining faster with no apps running, I will test it for 2 days and will try to use"Greenify" app and will post the battery results.
Also, please advice, is it ok to use battery calibration tool from playstore to calibrate the battery, or should I use cwm and wipe the battery status and then start again??
Battery calibrate App have already in rom.You can use it to calibrate.
How to.
1. Open app
2. connect charger in tab.
3. Wait for 100%
4. select calibrate=>OK. disconnect charger.
5. When battery is warning to low. Make all again to 2-3 times.
Leave a comment:
-
RK batch tool flash file working!!!!
Originally posted by Anucha View Post1. My custom rom is backup from CWM v.6.0.3.1, You must update to CWM v.6.0.3.1 first.
2. You can use RKAnroidTool to flash my custom rom. Include CWM recovery already.
Note: for restore by CWM recovery please check name of rom folder must no have space in name. easy way, rename it to short name.
Dear Anucha,
Thanks for this wonderfull ROM, finally I succeeded in flashing your ROM through RK batch tool file. Everything is awesome, but I think, the battery is draining faster with no apps running, I will test it for 2 days and will try to use"Greenify" app and will post the battery results.
Also, please advice, is it ok to use battery calibration tool from playstore to calibrate the battery, or should I use cwm and wipe the battery status and then start again??
Leave a comment:
What's Going On
Collapse
There are currently 8647 users online. 8 members and 8639 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Leave a comment: