TWRP Recovery with UBIFS Support For Amlogic Nextbook Tablets (Support Thread)

[Eduard Chiperi]

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.ota.version.id=V1.0.5.JRO03C.user.root.20131028
ro.build.display.id=V1.0.5.JRO03C.user.root.201310 28
ro.build.version.incremental=eng.root.20131028.110 616
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Mon Oct 28 11:06:47 CST 2013
ro.build.date.utc=1382929607
ro.build.type=user
ro.build.user=root
ro.build.host=midsc-P67-DS3-B3
ro.build.tags=release-keys
ro.product.board=EBM8000NBD
ro.vendor.name=YFMID
ro.product.model=EBM8000NBD
ro.product.brand=MID
ro.product.name=EBM8000NBD
ro.product.device=EBM8000NBD
ro.product.board=EBM8000NBD
ro.product.cpu.abi2=armeabi
ro.product.cpu.abi=armeabi-v7a
ro.product.manufacturer=YIFANG
ro.wifi.channels=14
ro.board.platform=meson6
# ro.build.product is obsolete; use ro.product.device
ro.build.product=EBM8000NBD
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=EBM8000NBD-user 4.1.1 JRO03C eng.root.20131028.110616 release-keys
ro.build.fingerprint=MID/EBM8000NBD/EBM8000NBD:4.1.1/JRO03C/eng.root.20131028.110616:user/release-keys
ro.build.characteristics=tablet
# end build properties
# system.prop for M1 reference board
# This overrides settings in the products/generic/system.prop file
#
#rild.libpath=/system/lib/libreference-ril.so
#rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=160
keyguard.no_require_sim=1
#set keyguard.enable=false to disable keyguard
keyguard.enable=true
ro.statusbar.widget=true
ro.statusbar.button=true
ro.statusbar.yearmonthdayweek=true

#wifi.interface=ra0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
#wifi.supplicant_scan_interval = 60
#alsa.mixer.playback.master=DAC2 Analog
#alsa.mixer.capture.master=Analog
#configure the Dalvik heap for a standard tablet device.
#frameworks/base/build/tablet-dalvik-heap.mk
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m

hwui.render_dirty_regions=false

media.amplayer.v4osd.enable=1
gadget.nand.force_sync=true

# Disable un-supported Android feature
hw.nopm=false
hw.nobattery=false
hw.nophone=false
hw.novibrate=true
hw.cameras=2
hw.hasethernet=false
#hw.hasdata=true
ro.platform.has.touch=true
# Wi-Fi sleep policy
ro.platform.has.sleeppolicy=false
#set to 0 temporarily so touch works without other changes
ro.sf.hwrotation=270
#0~7 You are required to get the correct install direction according the sensor placement on target board
#ro.sf.gsensorposition=6
#ro.sf.Gconvert_x_y=0
#ro.sf.Gconvert_x=1
#ro.sf.Gconvert_y=1
#ro.sf.Gconvert_z=1
ro.sf.ecompassposition=4
allow_all_orientations=1

# Set Camera Orientation

# Use OSD2 mouse patch
ro.ui.cursor=osd2

ro.hardware=amlogic

# Enable 32-bit OSD
sys.fb.bits=32

# Disable GPS
gps.enable=false

# Enable player buildin
media.amsuperplayer.enable=true
media.amplayer.enable-acodecs=asf,aac,ape,flac,alac
media.amplayer.enable=true
media.amsuperplayer.m4aplayer=STAGEFRIGHT_PLAYER
media.amsuperplayer.defplayer=PV_PLAYER
media.amplayer.thumbnail=true
#media.amplayer.widevineenable=true
media.arm.audio.decoder=ape,aac
#reduce the time of loading online video
media.libplayer.fastswitch=1
media.amplayer.delaybuffering=1
media.libplayer.ipv4only=1
media.amplayer.stopbuflevel=0.002

#for online video show loading icon too frequently
media.amplayer.buffertime=15

#fix online video block issue
libplayer.livets.softdemux=1
libplayer.netts.recalcpts=1

#v4osd for chrome video
media.amplayer.v4osd.enable=1
media.amplayer.dsource4local=1

# Nand write need force sync when gadget
gadget.nand.force_sync=true

# Status bar customization
ro.statusbar.widget.power=true
yf.show.compat=false
ro.statusbar.yearmonthdayweek=true

# HDMI
ro.hdmi480p.enable=false
#rw.fb.need2xscale=ok
#media.amplayer.osd2xenable=true

#camera DCIM dir. 0:sd only; 1:nand only; 2,sd first
ro.camera.dcim=1
ro.camera.lockorientation=false

# Disable preload-class
ro.amlogic.no.preloadclass=0

# App optimization
ro.app.optimization=true

#Dual display
ro.vout.dualdisplay3=true
ro.vout.player.exit=false
# CPU settings
ro.has.cpu.setting=true





# CPU freq customized in setting menu
# normal, performance, powersaving
ro.cpumode.maxfreq=1200000,1320000,800000

# when usbstorage, CPU mode and freq
ro.usbstorage.cpumode=performance
ro.usbstorage.maxfreq=600000

ro.bootanimation.rotation=90

#used to set default surface size, set 1 when hwrotation is 270, set 3 when hwrotation is 90;need set ro.bootanimation.rotation 0;
#debug.default.dimention=1

#YF prop
ro.yifang.devicename=NX008HD8G
ro.yifang.hotpoint=0
ro.keyguard.orientation=landscape
ro.yifang.weather.city=New@York
ro.yifang.weather.isf=1
ro.yifang.ota.enable=0
#hdmi settings
ro.hdmi.has.settings=false
#support internal storage erase
has.media.poll=false
ro.dongle.change.local=0
ro.yifang.locationsetting=1
#used forward seek for libplayer
media.libplayer.seek.fwdsearch=1
#enable address bar cover issue fixing
ro.flashplayer.surfacehack=1
ro.media.partition.label=NX008HD8G
ro.yifang.hotpoint=0
hw.erase.internalSdcard=true
ro.screen.has.usbstorage=true
virtualsd.enable=true
ro.yifang.bluetooth=0
ro.yifang.mobile=1
ro.yifang.mobile_dongle=0
ro.yifang.default.timeout=60000
ro.yifang.default.brightness=128
#google client prop
ro.com.google.clientidbase=android-anydata
ro.com.google.gmsversion=4.1_r4
ro.yifang.datausagesetting=1
ro.product.mobilenetwork = 0
#enable widevine
media.amplayer.widevineenable=true
#ro.setupwizard.mode=OPTIONAL
media.amplayer.dsource4local=1
ro.anydata.checkin=true
ro.audioEffectEnabled=true
ro.app.hdmi.allswitch=true
ro.rk.bt_enable=0

#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
drm.service.enabled=true
ro.carrier=wifi-only
ro.opengles.version=131072
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.hardware.version=1.0.0.0
ro.vendor.name=YFMID

here is the mrs. xxSAKISxx build.prop and i believe that mine is the same
and you wrote above that you did not see this board before and that you received a dump from one of these...

[Eduard Chiperi]

and i think if i'll flash with one of your roms, i'll brick the tablet at all...
am i right?

[Eduard Chiperi]

hi, mr. shaunmt
just giving you a reminder that I still looking forward for your help...
please...

[newby]

So I'm new to this could you give me a lil more detail to what exactly I be doing

[newby]

I'm new to this could you give me more detail on the process

[Eduard Chiperi]

it seems that this forum is dead, unfortunately....

[newby]

With Twrp recovery its so easy to backup&root it seemed hard at first but its very easy i downloaded a unzip app i unzipped twrp i put the ulmage recovery on my external sd powered off nx008hd8g opened up twrp with power&+volume button perform a backup reboot dowloaded kyser root open up twrp go to install find kyser root & tap install reboot to root easy peesy

[newby]

I found my nx008hd8g ro.product.board with Prop build editor app

[Eduard Chiperi]

what's your serial number?
and your ro.product.board name?

[Thermal_cause]

Could you please make a custom recovery for my nextbook 7/NX700qc I changed my build prop and I am stuck HELP!!

[foxccs]

Thank you for eveything mr.shaunmt is there anything new about the next7p12-8g m712mc_mb?

Hi
I have just registered to put a feedback....
I had the same model "next7p12-8g", with motherboard number "m712mc_mb" , the tablet was stuck in the first screen (Abraham Lincoln's saying about the books).
Few times of Factory reset did not helped, so TWRP was the only hope.
Finally I have completed the firmware update using SMT_TWRP_Next7P12-8G-NXM727MC_WM.zip as the program and SMT-Next7P12-8G-NXM727MC_WM-082313-8188eu_wifi.zip as a firmware.
My WiFi card was RTL8188 so this firmware was the correct one for the WiFi.
I can confirm that there was a major problem with TWRP having problems with the touch screen, even clicking on a simple buttons was like 1/4 of a success.
The slider for confirming the flash was a finale, but after a few days of trying , I got lucky. The slider moved to the right end, when most of the time it was not moving at all.
Even going to the halfway was a rare success. I understood that I should make the whole movement to the right, even the slider didn't wanted to move at all. As said, finally i have succeeded.
So, it was not about the center of the touch being displaced (maybe it was displaced a bit to the up side, but that was not the major problem).
It was more about the pressure of the finger (This was mentioned in one of the previous pages). I have succeeded with more like lighter pressure on the touch screen.
Otherwise, programming the firmware went without problems, first starting of the tablet was slower, which is understandable, WiFi worked as well.
BIG Thanks to Freaktab and Shaunmt for making this possible.

[ojacksonhill]

Hi there, the download link for the TWRP recovery for NX007HD8G doesn't seem to be working for me. Has the link been closed?

[silver9990]

Hi there, the download link for the TWRP recovery for NX007HD8G doesn't seem to be working for me. Has the link been closed?

The link seems to be broken, I have an old copy (SMT_TWRP_Next8HD8G-NXM8000ND_WM.zip), if you'd like I could upload it for you.

[ojacksonhill]

I don't suppose that that one would work for the NX007HD8G? shaunmt's link is to a file called SMT_TWRP_Next7HD8G-NXM7000NBD_WMN.zip

But if it is suitable I'd be grateful!

[silver9990]

I don't suppose that that one would work for the NX007HD8G? shaunmt's link is to a file called SMT_TWRP_Next7HD8G-NXM7000NBD_WMN.zip

But if it is suitable I'd be grateful!

My bad, I didn't pay enough attention & got the models mixed up. Unfortunately it won't work as far as I know.