Binary patched kernels for Pipo models

[moonwalkie]

As far as I know, the new ROM/Kernel is compatible with both versions. Wifi and 3G.

ok tnx m8! it runs smooth, will test it overnight
thanks a lot for quick response!

[BliND123]

Would it be possible to flip the way the touch screen works through editing the Kernel? I've got a Pipo M9 Pro that I replaced the digitizer on and the chip on it is different from stock. I've come to find that they sell this same digitizer for the Pipo M9, Pipo Max M9, and Pipo M9 Pro. In landscape mode it's the y axis (up and down) that's flipped, but in portrait it's still what would be the y axis in landscape that's flipped but with the x axis showing movement.

[malfrat]

Would it be possible to flip the way the touch screen works through editing the Kernel? I've got a Pipo M9 Pro that I replaced the digitizer on and the chip on it is different from stock. I've come to find that they sell this same digitizer for the Pipo M9, Pipo Max M9, and Pipo M9 Pro. In landscape mode it's the y axis (up and down) that's flipped, but in portrait it's still what would be the y axis in landscape that's flipped but with the x axis showing movement.

i do the wrong move too.. when beating the cat a lot in the way i crack my pipo screen

Seriously,yes it is possible, i got the shematic (thx Banggood Bobby and is pipo supplier) somewhere but it's a hardware trick... near the usb otg port there some kind of calibrate pin but very very tiny and if tablet is not calibrate well in this way i think that touchscreen will not respond very fast as it should.

i have ordered a digitizer replacement from Banggood.com for my pipo m9 pro 3g who originaly have a goodix 928. problem is that with the replacement (not goodix chip) the axis is reverted.

i have to resend my tablet along with the new digitizer to Banggood china for waranty repair. (tablet i purchase on banggood too) THX Bobby for fast support, fast mail answering and for unbeatable service overall android device china seller

hope that you buy the digitizer to the same seller that you buy your tablet, maybe some have good after-sale services for warranty and repair both in most of case not and very painfull in the ass...(doesn't answer mail , tablet is in china but doesn't seem to never be repair to get back home in many month and so on...)

I prefer now to pay little more for any electronic product (not huge difference) from Banggood and be assured that if something go wrong (dead on arrival, not work as it should, ect ), i'll have fast and happy ending solution from the store.

[BliND123]

i do the wrong move too.. when beating the cat a lot in the way i crack my pipo screen

Seriously,yes it is possible, i got the shematic (thx Banggood Bobby and is pipo supplier) somewhere but it's a hardware trick... near the usb otg port there some kind of calibrate pin but very very tiny and if tablet is not calibrate well in this way i think that touchscreen will not respond very fast as it should.

i have ordered a digitizer replacement from Banggood.com for my pipo m9 pro 3g who originaly have a goodix 928. problem is that with the replacement (not goodix chip) the axis is reverted.

i have to resend my tablet along with the new digitizer to Banggood china for waranty repair. (tablet i purchase on banggood too) THX Bobby for fast support, fast mail answering and for unbeatable service overall android device china seller

Yeah, they are selling this replacement with model# F-WGJ10136-V1 (chip says VTL CT363) as working with M9, M9 Pro, Max M9 on many sites and the one we need which is 300-L4598B-AOO V1 ( GOODIX GT928) isn't available anywhere. So it's a problem for many people trying to fix their digitizer and getting the only digitizer available which doesn't work right for it.

[d33]

It wouldn't be a problem if we had a dev kernel build but so far I've only got M8hd and M7pro working whilst Maakie has built one for the M6.
Without access to a device it is very difficult

[d33]

I'm still looking for people to post their model's DMESG so that I can try to build a custom kernel.

so far we have:

Pipo M6Pro
Pipo M8HD
Pipo M7Pro (95%)
Cube U30GT2
Pipo M9Pro (await test)
Pipo U8 (0%)

I think there are the following I'm waiting for data on:

M6 Max
M8 Pro
M9 Max
U6
M1 Pro

[kandilak]

I'm still looking for people to post their model's DMESG so that I can try to build a custom kernel.

so far we have:

Pipo M6Pro
Pipo M8HD
Pipo M7Pro (95%)
Cube U30GT2
Pipo M9Pro (await test)
Pipo U8 (0%)

I think there are the following I'm waiting for data on:

M6 Max
M8 Pro
M9 Max
U6
M1 Pro

Here is my PiPo M9 max (wifi only) dmesg --> https://dl.dropboxusercontent.com/u/....max.dmesg.txt

[d33]

Here is my PiPo M9 max (wifi only) dmesg --> https://dl.dropboxusercontent.com/u/....max.dmesg.txt

That isn't from boot.

To get a working DMESG for me it needs to be as soon after boot as possible. I get mine by using the following commands from a windows 8 cmd line:

1. "adb shell"
2. (adb shell) "dmesg > sdcard/dmesg-m9max.log"
3. (adb shell) "exit"
4. "adb pull sdcard/dmesg-m9max.log"

[herrjemineh]

How to get it for m7pro using win7pro or device?

Gesendet von meinem M7pro mit Tapatalk

[d33]

How to get it for m7pro using win7pro or device?

Gesendet von meinem M7pro mit Tapatalk

The same win7 / win8 /win 8.1 although you need to install adb (Android Direct Bridge from google)

[kandilak]

That isn't from boot.

To get a working DMESG for me it needs to be as soon after boot as possible. I get mine by using the following commands from a windows 8 cmd line:

1. "adb shell"
2. (adb shell) "dmesg > sdcard/dmesg-m9max.log"
3. (adb shell) "exit"
4. "adb pull sdcard/dmesg-m9max.log"

You mean this ?--> https://dl.dropboxusercontent.com/u/...mesg-m9max.log

[d33]

Binary patched kernels for Pipo models

Yes that's the one

I'll read when I get home


Sent from my iPhone using Tapatalk

[Zonk]

Say, d33: is making a kernel for the P4 still in the charts?

[sawbones999]

Wow! This thread is so long!

Any RK3288 kernels in there, or just RK3188?

I just ordered the M9S and would love to have some idea of how to uncompress/patch. Compatible source would be even better if is available somewhere.

Thanks!
-SB