Tanix TX6 TV Box - Allwinner H6 4/32GB Dual WiFi BT4.1 or 5

[Kotalke]

Phoenix card didn't work at box was completely dead. Was not powering on as well. Finally installed firmware using phoenix suite & usb to usb cable. Working fine now. Cheers.

@sangramd21 which one firmware have you installed finally?

[sangramd21]

download firmware from this post:


then burn it with phoenix card, u can found it here:

https://androidmtk.com/use-phoenixcard-tool

after success burn the FW, trun off ur TX6, insert the card then turn it on again. it will start flashing ur TX6. its work on my TX6

Phoenix card didn't work at box was completely dead. Was not powering on as well. Finally installed firmware using phoenix suite & usb to usb cable. Working fine now. Cheers.

[sangramd21]

with magisk i had the same problem... no boot at the reboot
i installed again the rom, may version, using cable linked to pc and the tanix reborn!
it work perfectluy till today!
try the flash again...

no more magisk for me before i am sure about it!

Yes I did install it finally using phoenix suite & usb to usb cable. Working fine now. No more magisk for me as well. Cheers.

[Kotalke]

Does anyone of you use siptv app to watch IPTV on your Tanix TX6 box? I wonder what firmware is the best to use it.

I've got FW 20190730 and some channels are freezing because of the codec issue (information confirmed by siptv dev).

[neutronzzz]

What a pity, I need a fw has no root.

no root fw came with the box when i buy it

[nvuphi]

i forgot which one, but already solved with this fw H6_9_4Gddr_20190722

What a pity, I need a fw has no root.

[neutronzzz]

i have tx6 clone (pendoo x6 pro) and it runs like a hunk of crap with the stock pendoo firmware that came on it.. got an updated firmware, it's a bit better but video playback is still pretty choppy tried all dif decoders and players. tried Tanix_TX6-SCV1 firmware and it's about the same performance wise as the new pendoo firmware.. ugh these things are crap! are the real TX6 boxes this bad too? 60fps videos look to be about 25fps or less it's so brutal.. wondering if anyone else has these pendoos (or any other clones) and had any luck with the tx6 firmwares??

real tanix TX6 has no problem when playing 4k video, smooth and no lag

have u try this firmware?

https://chinagadgetsreviews.com/download-android-pie-9-stock-firmware-for-pendoo-x6-pro-tv-box.html

[pcdude28259]

i have tx6 clone (pendoo x6 pro) and it runs like a hunk of crap with the stock pendoo firmware that came on it.. got an updated firmware, it's a bit better but video playback is still pretty choppy tried all dif decoders and players. tried Tanix_TX6-SCV1 firmware and it's about the same performance wise as the new pendoo firmware.. ugh these things are crap! are the real TX6 boxes this bad too? 60fps videos look to be about 25fps or less it's so brutal.. wondering if anyone else has these pendoos (or any other clones) and had any luck with the tx6 firmwares??

[neutronzzz]

Which Firmware yours has?

i forgot which one, but already solved with this fw H6_9_4Gddr_20190722

[nvuphi]

weird.. i have 4/32 and its not rooted, i test it with root checker

Which Firmware yours has?

[metlahead]

Yes it says tx6 and not tanix alice ux inside. I put a custom rom Tanix_TX6-SCV1 and it works fine for now but it's Android 7.0

[neutronzzz]

Hi, I have a TX6 clone. I have a problem with slowing down when I click on the icon.As far as I understand the problem is with the Hardware Layers, it is not working properly. I have tried almost all the firmware from this site and it always happens. Is there anything I can do about this.If anyone knows what to do, hI would appreciate it.

clone? u mean not an original tanix tx6?

[metlahead]

Hi, I have a TX6 clone. I have a problem with slowing down when I click on the icon.As far as I understand the problem is with the Hardware Layers, it is not working properly. I have tried almost all the firmware from this site and it always happens. Is there anything I can do about this.If anyone knows what to do, hI would appreciate it.

[Tzr808]

My TX6 box is dead & not showing any light. It was not booting up after I tried installing Magisk on it. I tried factory reset I but no luck. So I t tried to flash the firmware again but as the firmware installation was stuck in between, I powered off the device. Now the device won't power on at all. Its dead. Could you please help to restore the device? Not even a month I purchased it :-(

with magisk i had the same problem... no boot at the reboot
i installed again the rom, may version, using cable linked to pc and the tanix reborn!
it work perfectluy till today!
try the flash again...

no more magisk for me before i am sure about it!

[neutronzzz]

My TX6 box is dead & not showing any light. It was not booting up after I tried installing Magisk on it. I tried factory reset I but no luck. So I t tried to flash the firmware again but as the firmware installation was stuck in between, I powered off the device. Now the device won't power on at all. Its dead. Could you please help to restore the device? Not even a month I purchased it :-(

download firmware from this post:

H6_9_4Gddr_20190722.img

https://mega.nz/#!MyRlRQaS!2qJvpudWP...bSAIK5zm74Jz3A

then burn it with phoenix card, u can found it here:

https://androidmtk.com/use-phoenixcard-tool

after success burn the FW, trun off ur TX6, insert the card then turn it on again. it will start flashing ur TX6. its work on my TX6