Tanix TX6 TV Box - Allwinner H6 4/32GB Dual WiFi BT4.1 or 5

[dafnoula13]

Hi to everybody, is there any custom ATV rom for the tanix?

[RiCkLaR_atvX]

hey good day all, just found this forum, let's communicate to collaborate to make this community better.
you guy can have mine latest June 2020 firmware, if you need older version July 2019 just feel free to buzz me
8822 model
https://drive.google.com/file/d/1kSX...ew?usp=sharing
6330
https://drive.google.com/file/d/1ZvK...ew?usp=sharing

This firmware is still Android 9 (AOSP), correct?

Does hdmi-CEC work correctly?

[allanhoong]

My box when bought was Alice UX, April 2019 firmware. however not that stable especially bluetooth connection earphone and i don't keep it.

Lastly, this launcher quite good and simple to use (even my mum )
have a look https://play.google.com/store/apps/d...tv&hl=en&gl=US

[allanhoong]

Hi, u CAN NOT direct online update due to this is custom rom image. you still got to load though sd card or pc either way. (check other post online how to)

Lastly, i don't see any point to keep updating and reinstalling all the app if OS working fine unleast the scenario in future apps update can't support but require android firmware, which is very rare changes for couple years to go.

Cheers, have fun

[alfaclvi]

Thanks allanhoong

I installed your 8822 firmware on my TX6-H and recognized directly the RTL8822CS WiFi/BT module.
Of course this is not an AliceUX but works fine.
I don't know if this can be Updated since I tried to, but had the usual message "Now it is the latest version"

[allanhoong]

hey good day all, just found this forum, let's communicate to collaborate to make this community better.

you guy can have mine latest June 2020 firmware, if you need older version July 2019 just feel free to buzz me

8822 model

https://drive.google.com/file/d/1kSX...ew?usp=sharing

6330

https://drive.google.com/file/d/1ZvK...ew?usp=sharing

[tonygts]

Hi Frank, Would you please share this TX6 imagex
IMG_20201225_093503.img for us to try out.
Thanks in advance.

Frankk
You post here, to ask for help, and when people asked to share the firmware image, you seem to be quite reluctant to share. Then, how possibly can you expect help.

[alfaclvi]

Thanks for the help and advice.
I tried and it doesn't work.
However, it works if I select "Startup" in "Write mode" in PhoenixCard, in which case the system works from the SD card and everything is very, very slow.

Best regards

Frank

Hi

Try phoenix card v3.10, another SD card and a different firmware
I also some times have problem to write image on SD, then I do a format to normal, eject the SD. format again with windows format and then burn the image. There is possibly a compatibility issue with Windows 10.

[tonygts]

https://4pda.ru/forum/index.php?show...#entry82248937

Thanks for the reply.
I've tried this before. It does not work as a "Product" as described in this article. It works, however, if I check “Startup” then the system boots from the SD card and everything is very slow.
http://www.hotmcu.com/wiki/PhoenixCard

Hi Frank, Would you please share this TX6 imagex
IMG_20201225_093503.img for us to try out.
Thanks in advance.

[jhoonycxs]

look at my posts
you need software 20190506 or
20190507

TX6_H6_9_4Gddr_20190506.img

The file you are trying to download is no longer available.

plz reupload

if possible
thx

[alfaclvi]

Anyone knows what is the manufacturer of TX6-H Allwinner H6 4GB/64GB with RTL8822CS wifi/bt ? This is supposed to be a newer version. After failing to completely unroot this device, I flashed with original Tanix firmware 20190228 img but know wifi and bluetooth are dead. Possibly and some other features?
I cannot find a TX6 firmware that contains driver 88x2cs.ko in /Vendor/Modules and Tanix won't help since this is not their product. Possible manufacturers are TOPLEO and B2GO but none of them mentions a TX6-H model.

[Cosmi]

IMG_20201225_093503.img

Frankk, share the firmware IMG_20201225_093503.img?

[Frankk]

https://4pda.ru/forum/index.php?show...#entry82248937

Thanks for the reply.
I've tried this before. It does not work as a "Product" as described in this article. It works, however, if I check “Startup” then the system boots from the SD card and everything is very slow.

http://www.hotmcu.com/wiki/PhoenixCard

[Cosmi]

Thanks for the help and advice.
I tried and it doesn't work.
However, it works if I select "Startup" in "Write mode" in PhoenixCard, in which case the system works from the SD card and everything is very, very slow.

Best regards

Frank

Take a look here

https://4pda.ru/forum/index.php?showtopic=929205&view=findpost&p=82248937

Please post it, IMG_20201225_093503.img
I want to try it )

[Frankk]

Thanks for the help and advice.
I tried and it doesn't work.
However, it works if I select "Startup" in "Write mode" in PhoenixCard, in which case the system works from the SD card and everything is very, very slow.

Best regards

Frank