TANIX TX6S Allwinner H616 Android 10.0 TV Box 2GB/16GB 2.4G+5.8G WiFi LAN Bluetooth

[gksureshkumar]

Turkmenator could you test if your box is detected when you connect to phoenixsuit ?

I think it is a driver problem, that the box is not detected...??

Dear Tombraga i have this driver problem. My TX6S box is not detected by phoenixsuit. Can you provide the driver for my windows 10 PC. then i may connect the box and flash the img file.

[tombraga]

Turkmenator could you test if your box is detected when you connect to phoenixsuit ?

I think it is a driver problem, that the box is not detected...??

[tombraga]

my problem: phoenixsuit don´t detect the box, the cable is not the problem, already flashed with it amlogic boxes...

and with phoenixcard i cannot burn sucessfully, error in the end, see picture...this allwinners is really shit...

[Turkmenator]

Is this not the firmware image which is already on Tanix donwload for the first series? upper download

I don't know
User solo_ilim from 4pda just now unbricked dead box with this firmware

[tombraga]

Is this not the firmware image which is already on Tanix donwload for the first series? upper download

[Turkmenator]

Hi guys!Found link to firmware image 1,6Gb from 20.02.2020
http://blog.geekbuying.com/2020/02/u...-box-20200220/

Glad to share the firmware for TANIX TX6S Allwinner H616 Android 10.0 KODI TV Box 4GB/32GB and 4GB/64GB
Link to image http://geekbuying.mediafire.com/file/6ky80b2oq08xlk9/TX6S-4G-20200220.img/file
This firmware is only for Tanix TX6S Allwinner H616 4GB TV Box.
Flash guide, please refer to:http://blog.geekbuying.com/2016/02/a...utorials-tool/
Have fun!
I add mirror link,if download speed problem in your country

https://1drv.ms/u/s!Ascgd6dd3ji1g2qc37gCnS6_1Z1F?e=hjOiPA

[gksureshkumar]

Sorry to hear it, but perhaps you should wait untill anybody creates a TWRP Recovery for the TX6s. After you should have the chance to boot via sdcard into TWRP and flash the update.zip.

If you have a knowing person in your neighborhood you could try to shorten the nand. But please... this is very dangerous for your box and should be done by a specialist. I had same problems with a TX3 and a friend solved the problem. Here is an image what and where he shortened the nand.

Dear Friend, Thank you for your care and the solutions given for my Box problem. I will wait for a TWRP recovery for TX6s. For shorten the nand i do not have a known specialist who can do this. I really appreciate your reply on this.

[TheRealDeal]

Dear friend
No luck at all. I tried the paper clip to press. I can feel the clicking ( i heard it). After following this procedure recovery mode does not start. As you mentioned my box recovery also broken it seems. This TX6S Box is unusable now.........

Sorry to hear it, but perhaps you should wait untill anybody creates a TWRP Recovery for the TX6s. After you should have the chance to boot via sdcard into TWRP and flash the update.zip.

If you have a knowing person in your neighborhood you could try to shorten the nand. But please... this is very dangerous for your box and should be done by a specialist. I had same problems with a TX3 and a friend solved the problem. Here is an image what and where he shortened the nand.

[vasko_kl]

New update is come on http://www.tanix-box.com/download-vi...h616-original/
with differences by serial number
UPD
Tanix confirmed that the update is only for serial 001-250. For other serials, the update will be, but not yet ready.

This link does not work, can we get another link - mb. mega? Thanks.

[tombraga]

New update is come on http://www.tanix-box.com/download-vi...h616-original/
with differences by serial number

Thanks a lot for this informations

[Turkmenator]

New update is come on http://www.tanix-box.com/download-vi...h616-original/
with differences by serial number
UPD
Tanix confirmed that the update is only for serial 001-250. For other serials, the update will be, but not yet ready.

[gksureshkumar]

1. First of all, test this without anything plugged in. No power, no usb stick, nothing. You should feel the click (and hear it). Test and learn how to hold the paperclip / needle or whatever you use for it for a while
2. After managing this fuc**ng toothpick trick and how to hold it, put the usb stick in your box.
3. Put the toothpick in and hold it
4. Plug in the power
5. Hold the toothpick / needle...you will have to wait until the recovery is shown while holding the toothpick (7 - 8 seconds or so)

If this all not works for you, your recovery is broken also (whyever ?!?!?!) or you should let a friend of you, who is technically experienced than you do this...

Dear friend
No luck at all. I tried the paper clip to press. I can feel the clicking ( i heard it). After following this procedure recovery mode does not start. As you mentioned my box recovery also broken it seems. This TX6S Box is unusable now.........

[MartaN]

...
2. After managing this fuc**ng toothpick trick and ...

[TheRealDeal]

I pressed the tooth pick in the reset button and inserted the power cord to go to recovery mode

1. First of all, test this without anything plugged in. No power, no usb stick, nothing. You should feel the click (and hear it). Test and learn how to hold the paperclip / needle or whatever you use for it for a while
2. After managing this fuc**ng toothpick trick and how to hold it, put the usb stick in your box.
3. Put the toothpick in and hold it
4. Plug in the power
5. Hold the toothpick / needle...you will have to wait until the recovery is shown while holding the toothpick (7 - 8 seconds or so)

If this all not works for you, your recovery is broken also (whyever ?!?!?!) or you should let a friend of you, who is technically experienced than you do this...

[gksureshkumar]

Could you feel a light klick when you pressed the tooth Pick? It's a little tricky to hold this down enough time after connect the power.

I use always a paperclip, more stable as wooden tooth Pick. But must use carefully and soft pressing.

Dear Tombraga Thank you for the input. I will try and give my feedback. If you have any other trick for opening recovery mode please mention.