You can also a) write the stock factory image to an SD card with PhoenixCard V309, b) insert the SD card and then power cycle the box. It'll boot the image and flash it straight to nand memory. No cable, no reset required.
Image to SD card = 7 - 8 minutes
SD card to nand memory = 8 minutes
Not the fastest route, perhaps, but avoids possible issues with drivers, USB and the burning tool.
I've uploaded PhoenixCard here (new link):
The link below summarizes this "Production SD Card Method". Just make sure the "Product" option is checked before writing the image to SD card.
Note: with our board, you do get a helpful on-screen progress bar during the flashing stage.
Comment