TWRP for Amlogic devices.

[yric37]

No. Just once.

Thanks again!

[abdul_pt]

How is the size? Small ? Good ?

Tapatalked

[yric37]

How is the size? Small ? Good ?

Tapatalked

It is too big yet and came back after any action in TWRP. HOW to save default resolution 1024x600?

[abdul_pt]

Give me the recovery.log.

If something isn't working right, please provide if possible, recovery.log and dmesg. You can go to advance tab, and choose copy log to SD or do adb pull tmp/recovery.log

[no_spam_for_me]

...
Minix x8-h

...

- Minix is using non standard partition layout, until they release the SDK or someone finds what changes they made the backup of some partitions isn't possible. Those partitions are bootloader,boot,recovery, logo but flashing this partitions from recovery works.

I remove those options from this image, and added cache to backup.
...

Does it help, if I give you some information? If yes, which one (e.g. 'cat /proc/mtd')?

[abdul_pt]

I have a x8-h, only not here with me gave it to my parents. I started with the x8 so did a fare amount of testing. It's been a month since Minix said they will release the SDK. I don't doubt they will, but for now is just to time consuming and stressful.

Have you tried this update ?


Have you looked at cat proc/mtd ? or emmc ?

Now try cat proc/ntd and tell if you have ever seen that. The problem is TWRP can't detect the partitions sizes, ignores them. Something new evolving something related with this.
It's just my idea

[no_spam_for_me]

Hi,

first step the easy part
'cat /proc/mtd'

dev:    size   erasesize  name
mtd0: 00060000 00001000 "bootloader"
mtd1: 00010000 00001000 "ubootenv"

(I don't think it's really helpful and the same as at S89 )...

'cat /proc/partitions'

major minor  #blocks  name
 
 253        0     512000 zram0
  31        0        384 mtdblock0
  31        1         64 mtdblock1
 179        0    7744000 mmcblk0
 179        1    7739234 mmcblk0p1
 179       16   15267840 mmcblk1
 179       17      65536 mmcblk1p1
 179       18     524288 mmcblk1p2
 179       19       8192 mmcblk1p3
 179       20      32768 mmcblk1p4
 179       21      32768 mmcblk1p5
 179       22      32768 mmcblk1p6
 179       23      32768 mmcblk1p7
 179       24    1048576 mmcblk1p8
 179       25   13424640 mmcblk1p9
   8        0  976759808 sda
   8        1  976758784 sda1
 179       48       2048 mmcblk1boot1
 179       32       2048 mmcblk1boot0

(Also I don't think it's really helpful...)

Then I found out that 'cat proc/ntd' wasn't a typing error

dev:    size   erasesize  name
inand01:   4000000     80000 "reserved"
inand02:  20000000     80000 "cache"
inand03:    800000     80000 "env"
inand04:   2000000     80000 "logo"
inand05:   2000000     80000 "recovery"
inand06:   2000000     80000 "misc"
inand07:   2000000     80000 "boot"
inand08:  40000000     80000 "system"
inand09: 333600000     80000 "data"

The rest you wrote I don't really understand
Where do I find the emmc, or what do you mean?
Generally I know the 'GUID Partition Table' but I have no idea if it will have an effect here at android...

More Infos????

BTW: minix said, that they will release the source (??also SDK??) after 002 ...

[tiguy82]

I tried on mine S89-H with 720dpi theme and it works great! Now I can reboot to Android

Keep the good work!
:

[manu81]

With this recovery is possible use the remote control? or only use the mouse

[abdul_pt]

No. A mouse is advice.

Tapatalked

[hansxia]

Thanks

Installed in a S802 TV Box successfuly, ROM is finless 1.8, wifi is RTL, I modified the ROM.

thank you very much , that's a amazing work.

Q: Can TWRP support external file? I want change remote.conf for diffrent tv box.

this is the content for my remote:

#amlogic NEC remote
factory_code = 0x79840001
work_mode    = 0
repeat_enable = 0
repeat_delay = 250
repeat_peroid = 39
release_delay = 150
debug_enable  = 1
left_key_scancode  = 0x07
right_key_scancode = 0x09
up_key_scancode    = 0x05
down_key_scancode  = 0x00
ok_key_scancode    = 0x08
 
key_begin  
        0x07 105  #DPAD_LEFT
        0x09 106  #DPAD_RIGHT
        0x05 103  #DPAD_UP
        0x00 108  #DPAD_DOWN
        0x08 28   #ENTER
        0x1A 0x0f #BACK
  0x1b 139  #MENU
  0x10 104  #VOLUME_UP
  0x0f 109  #VOLUME_DOWN
  0x06 102  #HOME
  0x12 116  #POWER WAKE
key_end

[trebor]

Found this E:Find_File: Error opening '/sys/class/leds/lcd-backlight

New to TWRP just getting my head around it all
Using M8 and TWRP2.7.1.0
I see E:Find_File: Error opening '/sys/class/leds/lcd-backlight
Is this Good, Bad or is not a concern as its on a M8
New to TWRP just getting my head around it all
But working well, No Hiccups yet.
Dont have a heavily loaded M8, run PLEX no issues
general stuff running for 8 hours, 5 hours movies etc.

Well Done

[tiguy82]

I get the same error. Maybe is looking for some file that is not used by our boxes.

I own a S89-H

Sent from my Nexus 4 using Tapatalk

[Phrozin]

Hi Abdul,
Is there a way to remove TWRP 2.7.1.0 from the M8 square, I don't see the file anymore on your first post.
I encountered the same problems as previous member about not recovering data from XBMC as well as XBMC can't play some media files. I checked for bad sectors on ext. sd card and used another one, same problem. I even got message:"E: can't mount internal storage"
It took me three tries and then I got it running again and xbmc playing media files.
Would like if you can help me with a removal of TWRP

[abdul_pt]

Sure. I would really like to understand what's happening to try to solve it.

Stock recovery M8