Just wondering if anyone has fixed an MX2 HD 18 v2.22 with A13 v1.0 that gives the following
Code:
[ 14.239765@0] SD/MMC initialization started...... [ 14.878937@0] mmc data3 pull high [ 14.879157@0] sd_mmc_info->card_type=0 [ 14.880347@0] begin SDIO check ...... [ 14.906562@0] sdio_timeout_int_times = 0; timeout = 498 [ 14.929158@0] sdio_timeout_int_times = 0; timeout = 497 [ 14.929185@0] SEND OP timeout @1 [ 14.931949@0] mmc data3 pull high [ 14.935437@0] begin SD&SDHC check ...... [ 14.981497@0] sdio_timeout_int_times = 0; timeout = 498 [ 14.981527@0] SEND IF timeout @2 [ 15.007046@0] sdio_timeout_int_times = 0; timeout = 498 [ 15.007074@0] begin MMC check ...... [ 15.051508@0] sdio_timeout_int_times = 0; timeout = 498 [ 15.051539@0] No any SD/MMC card detected! [ 15.055172@0] #SD_MMC_ERROR_DRIVER_FAILURE error occured in sd_voltage_validation() [ 15.062842@0] [card_force_init] unit_state 3 [ 15.062853@1] [ 15.062856@1] SD/MMC initialization started...... [ 15.073562@0] [dsp]DSP start addr 0xc4000000 [ 15.077685@0] [dsp]register dsp to char divece(232) [ 15.087253@0] DSP pcmenc stream buffer to [0x9e001000-0x9e201000] [ 15.088599@0] amlogic audio dsp pcmenc device init! [ 15.094360@0] amlogic audio spdif interface device init! [ 15.202808@0] error, the rtc serial communication abnormal, reset the rtc! [ 15.307882@0] error, the rtc serial communication abnormal, reset the rtc! [ 15.412952@0] error, the rtc serial communication abnormal, reset the rtc! [ 15.518038@0] error, the rtc serial communication abnormal, reset the rtc! [ 15.623112@0] error, the rtc serial communication abnormal, reset the rtc! [ 15.728188@0] error, the rtc serial communication abnormal, reset the rtc! [ 15.833255@0] error, the rtc serial communication abnormal, reset the rtc! [ 15.938358@0] error, the rtc serial communication abnormal, reset the rtc! [ 16.043443@0] error, the rtc serial communication abnormal, reset the rtc! [ 16.148523@0] error, the rtc serial communication abnormal, reset the rtc!
Comment