Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

S802 Xbox support installer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    S802 Xbox support installer

    UPDATE 6/24
    OK all the same as below but now PS3 controllers are added!
    See download links below for you box!


    ___________________________________________


    UPDATE 6/21
    Because every s802 box is different, woomg made different KO modules for different kernels and boxes! See download links below for you box!


    _________________________________________


    Hey folks, here is a simple ZIP update that will install support for the Xbox controller.
    Woomg is working on PS3.

    SPECIAL THANKS to FreakTab user woomg for providing the kernel KO modules for the S802 platform!

    Please give the guy Kudos!

    Now this will work ONLY on ANY of my ROM's that have init.d support added! It will NOT work on stock ROMs. However the Minix X8 has init.d in stock ROMs but it's different than my init.d (folder names are different)


    This is a simple ZIP update and no instructions are provided. Simply download this and install it via recovery or the update APP supplied with every S802 box.

    What this does:
    It installs the KO modules:
    xpad.ko
    joydev.ko
    gameport.ko
    On some kernels is also installs
    ffmemless
    into /system/lib/
    Then it installs a init.d script 09xpadjoy to /system/etc/init.d
    This init.d script will automatically install the KO modules on every boot.



    Here are the ZIP downloads for different S802 boxes

    UPDATE ->Xbox/PS3 KO module installer for Finless S82/S89 ROMs (200 KB)

    UPDATE ->Xbox/PS3 KO module installer for Finless ENY M8 ROMs (200 KB)

    UPDATE ->Xbox/PS3 KO module installer for Finless Neo X8 ROMs (200 KB)

    UPDATE ->Xbox/PS3 KO module installer for STOCK Neo X8 ROMs (200 KB)


    Enjoy,
    Bob
    Last edited by Finless; 06-24-2014, 19:40.
    "Pzebacz im, bo nie wiedzą, co czynią"
    "Прости им, они не ведают, что творят"
    "Perdona loro perché non sanno quello che fanno"
    "Vergib ihnen, denn sie wissen nicht, was sie tun"
    "Vergeef hen want ze weten niet wat ze doen"
    "Pardonne-leur car ils ne savent pas ce qu'ils font"
    "Perdónalos porque no saben que lo que hacen"
    "Oprosti im, jer ne znaju što čine"
    "Forgive them as they know not what they do"






    #2
    FYI, I will put these in all my new ROMs as part of boot so you will never need to patch again.
    So for right now these are ONLY for any finless ROMs as of this date because it uses init.d

    Later ROM's this will be built in.

    Again I cannot thank woomg enough for supplying these to everyone!
    Woo is the MAN!

    Bob
    "Pzebacz im, bo nie wiedzą, co czynią"
    "Прости им, они не ведают, что творят"
    "Perdona loro perché non sanno quello che fanno"
    "Vergib ihnen, denn sie wissen nicht, was sie tun"
    "Vergeef hen want ze weten niet wat ze doen"
    "Pardonne-leur car ils ne savent pas ce qu'ils font"
    "Perdónalos porque no saben que lo que hacen"
    "Oprosti im, jer ne znaju što čine"
    "Forgive them as they know not what they do"





    Comment


      #3
      Thanks Bob !!!

      This only works with wired version of the xbox 360 controller right ? The wireless ones need dongles I assume ?

      Comment


        #4
        Originally posted by rapalax View Post
        Thanks Bob !!!

        This only works with wired version of the xbox 360 controller right ? The wireless ones need dongles I assume ?
        Based on this post by Woomg, it works on BOTH!

        http://www.freaktab.com/showthread.p...l=1#post194361

        I do not have either xbox controller so cannot test but he basically swears it works on both!

        Bob
        "Pzebacz im, bo nie wiedzą, co czynią"
        "Прости им, они не ведают, что творят"
        "Perdona loro perché non sanno quello che fanno"
        "Vergib ihnen, denn sie wissen nicht, was sie tun"
        "Vergeef hen want ze weten niet wat ze doen"
        "Pardonne-leur car ils ne savent pas ce qu'ils font"
        "Perdónalos porque no saben que lo que hacen"
        "Oprosti im, jer ne znaju što čine"
        "Forgive them as they know not what they do"





        Comment


          #5
          Originally posted by rapalax View Post
          Thanks Bob !!!

          This only works with wired version of the xbox 360 controller right ? The wireless ones need dongles I assume ?
          Other Korean user tested with wireless and he told me works fine. However, I am not sure what is his environment for test.

          Comment


            #6
            Thank you, will test this evening

            Comment


              #7
              Originally posted by woomg View Post
              Other Korean user tested with wireless and he told me works fine. However, I am not sure what is his environment for test.
              Just tried now with PS3 controller and on sixaxis compatibility i still get get segmentation fault?

              Comment


                #8
                Tested on xbox360 wired not original gamepad with dead trigger 2 and works great will do some testing with the ps3 also thanks woomg,Bob

                Comment


                  #9
                  Originally posted by aeolous View Post
                  Tested on xbox360 wired not original gamepad with dead trigger 2 and works great will do some testing with the ps3 also thanks woomg,Bob
                  have you somehow mapped the controller? or just plug and play?
                  ----

                  I have tested now with xbox 360 controller - wireless connection... OK
                  xbox 360 receiver is required (http://goo.gl/ElrLro)
                  work as charm! great job!
                  Last edited by Saris; 06-20-2014, 12:17.
                  Tronsmart s89 Elite - Finless 2.1 ROM

                  Comment


                    #10
                    Thanks woomg, bob

                    Cheers fellas

                    JusMe
                    Bugs are Sons of Glitches!

                    If you like my work and it's helped you, you can always shout me a beer or two Click - Here

                    Links : Visit JustMe ROMs - EM8 Square Roms - EM8 OpenELEC Rom - ADB GUI

                    JustMe

                    Comment


                      #11
                      Originally posted by Saris View Post
                      have you somehow mapped the controller? or just plug and play?
                      ----

                      I have tested now with xbox 360 controller - wireless connection... OK
                      xbox 360 receiver is required (http://goo.gl/ElrLro)
                      work as charm! great job!
                      Just plug and play

                      Comment


                        #12
                        Not working for me...

                        Doesn't seem to work for me.

                        Using square M8 box with Finless 1.6

                        Tried both wired and wireless PS3 controller and also wired Xbox 360 controller and they are not detected.

                        Tried both usb ports, same issue.

                        Sixaxis Controller app gets segfault. Sixaxis Enabler app says firmware lacks support.

                        Both 360 and PS3 controllers will not sync with box.

                        Thanks for your continued effort!

                        Comment


                          #13
                          For Sixaxis Controller, unless there is a module called hid-sony, most probably won't work with that app.

                          Those drivers can be compiled in drivers/hid most probably (unless it was like that in MX devices). there should others like hid-gaff and hid-pl which are used by many ps2 and ps3 gamepads clones (pantherlord and greenasia gamepads).

                          I haven't tried PS3 controller yet, I use an Ipega 9017 via BT that works out of the box.

                          Comment


                            #14
                            Originally posted by skelton View Post
                            For Sixaxis Controller, unless there is a module called hid-sony, most probably won't work with that app.

                            Those drivers can be compiled in drivers/hid most probably (unless it was like that in MX devices). there should others like hid-gaff and hid-pl which are used by many ps2 and ps3 gamepads clones (pantherlord and greenasia gamepads).

                            I haven't tried PS3 controller yet, I use an Ipega 9017 via BT that works out of the box.
                            When I got the kernel config file from boot.img, that say almost hid driver was built-in. I will try to double check the configuration.

                            Comment


                              #15
                              But the hid-sony one or just the UHID one?

                              I haven't checked in my device yet. I will take a look too.

                              Are you using oman's source from gihub?

                              Comment

                              Working...
                              X