I have M8S Amlogic S812...
It had a problem
"Blue light was on. on TV I got just AMLOGIC screen. device wasn't move to android. it was repeating itself on same screen"
I tried SD boot. but It didn't work.
I tried USB burning tool,
reset button + USB + Power.... it connected to PC.
but all the time I got the Error at %2:
[Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
And I had to plug out and do it again for reconnect the device to the PC
but once;
I removed all ticks, I just kept "erase Flash" in burning tool.
and I got completed.
but nothing has been changed.
----------------------------
I tried to circuit NAND pins.
I don't know if I made a mistake but now;
There is no Blue Light.
There is no image on TV
but now, I don't need to click reset button, if I plug USB + Power, it directly connects to PC.
If I want to use USB Burning tool; again I'm getting the same error.
but now, I don't need to plug out and in again, its refreshing itself and tries again and again but getting same error in same place.
NOTE: It is solved by using this firmware:
https://mega.nz/#!1Fw1Ta5a!0kpwpqjiY...Q-B09FRcGrsAHY
NOW:
Wi-Fi is not working.
I can't make it "ON"...
Comment