M8 box bricked usb burning tool fails at 2% "SOLVED"

[odene75]

hey guys i have been trying all week to flash my m8s s812 box but it always stops at loading spl (images attached) I'm using Amlogic version 1.6.22 because the other versions dont work for me. on version 2.0.43 it always fail at 2%. please help any assistance would be appreciated

[scooter2014]

I tried to M8S_S812_2GB_26102015.zip and goes wrong. Please HELP ME. M8S S812 bcm4335

Try with a fresh formated sd card and copy to sd card looks like files not installed on sd properly.

[jpereira89]

Check out my unbrick video and files. It might help. Board doesnt look exactly the same . But your probably exhausted all other options. Files are in description. let us know if it works.

https://www.youtube.com/watch?v=t_fMCUXwF4Q

Hi,
I have to thank dwtk for their support with the video.
My box was bricked, only have red light, reset button wasn't have any result, USB burning Rom give me erro after 4 seconds in "...USB" with and without option seven in start options (disable controllers) . I try everything without success.
I try with the video and my MXIII M82 Amlogic S802 1GB raised. Everything it's ok, I have 65MB of download with eternet cable and before I had only 38MB. The RAM it's only on 20%, it's very fast in android menu and aplications. At he moment have only one problem, when activate Wifi makes the wireless network search and doesn't get out of here.
I don't know if it's an incompatibility of ROM with the Wireless network card or other reason.
Can you help?
I didn't open the box so it can't indicate the model of the board installed.
Thank you all.

[dwtk]

Hi

Same issue here with a M8 S802. The only way I can get recovery to show up is by this metamethod after several attempts. When finally in recovery I'm able to try to flash a zip file, but haven't been able to find one that works.

I got an .img file from manufacturer but don't know how to flash it via SD card, since USB method is not working for me either.

Anyone recognizeS this PCB? don't seem to have those pins to short either....

[ATTACH=CONFIG]n542749[/ATTACH] [ATTACH=CONFIG]n542748[/ATTACH]
[ATTACH=CONFIG]n542746[/ATTACH]
[ATTACH=CONFIG]n542747[/ATTACH]

Check out my unbrick video and files. It might help. Board doesnt look exactly the same . But your probably exhausted all other options. Files are in description. let us know if it works.

https://www.youtube.com/watch?v=t_fMCUXwF4Q

[maguct]

Hi

Same issue here with a M8 S802. The only way I can get recovery to show up is by this metamethod after several attempts. When finally in recovery I'm able to try to flash a zip file, but haven't been able to find one that works.

I got an .img file from manufacturer but don't know how to flash it via SD card, since USB method is not working for me either.

Anyone recognizeS this PCB? don't seem to have those pins to short either....

[feh]

Sam Issues i have with S812 Board on M8S Box
Refer here:

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/529553-i-unbrick-m8s-how-to-included-now-i-need-firmware-rom-m8s-model-kca-003/page3

I always need to connect pins to get into recovery, but all firmwares failing to flash because of /cache/ can't be found/mounted whatever

[kozzito]

after wipe data/factory reset and wipe cache partition give this.

Hi. Same issue here, on an MXIII, cant find any flash recovery image for it. Seems like flash cant be mounted. I've tried through USB_Burning_tool too, but at 4% formatting it stops with ->

"[HUB3-12][Err]--failed:[00:04:32 487][HUB3-12][Err]--Check command return failed
[HUB3-12][Err]--[0x30201004]UBOOT/Disk initialize/Send command/Error result
"
I've tried shorting flash pins, that method let me AT ALL to connect via USB

Thanks

[Boliadis]

after wipe data/factory reset and wipe cache partition give this.

[Ploggy]

Sorry but it did not help, do the same again.

If you can get into recovery, have you tried installing the firmware with the "apply update from EXT" option? also have you tried wiping the cache? I dont know how dangerous "wipe data/factory reset" will be so do that at your own risk.

[DexDrive]

Same thing here, and mine is bricked after flashing wrong firmware. Thanks for all the help thus far.

[Boliadis]

Sorry but it did not help, do the same again.

[Ploggy]

Right I'll put it out there for anyone else with our mobo version (so far it works for M8 V8_8 and M8 V8_6)

(THIS IS TO UNBRICK NOT UPDATE YOUR M8)
(USE AT YOUR OWN RISK)

Things your going to need:
M8S_S812_2GB_26102015.zip
Amlogic_SDcardMaker_BootcardMaker_burnBootCard_v1. 0.1.zip
A Blank SD Card

1.Download the Firmware from here: https://mega.nz/#!V08yhQ6C!e37b8y7F6...T1b5Ld2vwmTJa0
and SD Boot Maker from here: http://www.mediafire.com/download/mf...ard_v1.0.1.rar

2.Once Firmware and SD Card Maker has downloaded, extract each to a folder, insert your blank SD Card and run the SD Card Maker.

3.load your SD Card, check the "To Partion and Format" option and select U-Boot.bin file from the extracted M8S_S812_2GB_26102015.zip NOT FROM THE SD CARD MAKER FOLDER and click "MAKE"

4.Once the Card is Formatted and finished drag the 4 files from the M8S_S812_2GB_26102015.zip (Recovery.img, aml_autoscript, factory_update_param.aml and bcm4335-ota-20151013.zip) to your now formatted SD CARD.

5.Pop your SD Card into your M8 Box and hold in the Reset Button (in the AV port) and power up the Box.

If all went well the blue light should come on and you should see the Green Android Robot screen with a blue progress bar installing the Firmware. (you can release button now)
Let it do it's thing and it should reboot back to normal.

[Ploggy]

Is your box even bricked? if it's not I would suggest not messing with it

[Boliadis]

I tried to M8S_S812_2GB_26102015.zip and goes wrong. Please HELP ME. M8S S812 bcm4335

[Adamdroid]

I think I figured out our problem.

The Firmware that worked for me is called: M8S_S812_2GB_26102015.zip
https://mega.nz/#!V08yhQ6C!e37b8y7F6...T1b5Ld2vwmTJa0
(You have to use the Boot Card Maker)

Once you've made up the SD Card (with Boot Maker) pop it in and hold the button down and you should be back up and running again

Good luck..

EDIT: LOL just realised your the same guy I replied to earlier in the other thread :P

Yeah! Works without touching pins and using usb tool even if no blue led light. Just hold the reset button untill the iron man on screen disapears. Awesome! Thank you so much!