If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
hi guys
i have an OTT M8 tv box here
on the pcb there is
XT-s812-v10
2015-08-04
im not sure how to unbrick this
i tried flashing the megatron v3 firmware to it
and now its just a black screen on boot up
i cant get into any recovery menu either
any help here greatly appreciated
on the MCU it says
Amlogic S812 quad core
use the included u-boot.bin image to format the SDcard first or it will not work period (remember this)
once you prep the card
go into the archive what you downloaded and copy all files from there onto the SDcard inc the u-boot.bin file
once ready stick it into the M8 box and hold the RESET pin down. and power up the box
my light went from blue to read after about 8 seconds and if i let go here the box booted up with the previous bricked image (mega tron)
so i reset again and held the RESET button till the android man was on screen
after it rebooted it showed the amlogic boot logo with M8S+ badge
then the screen went to an ANDROID logo, just leave it as its flashing now
after about 7 mins my box said setting up apps to which i took out the SDcard and left it be till it booted into my fresh android OS
job done
couldn't of done it without help from you guys here
hope my post helps others as ive seen you guys all having the same probs
trying this now hope it works. its funny because on startup the screen said s802 amlogic. really an s812. crazy!! I don't know how they flashed s802 firmware on a s812.
Glad my write up is helping some of you guys
Im just going by what firmware flashed ok and booted up fine, mine was M8S+ firmware lol
I know its S812 as it said on the pcb and on the mcu
Its good stable software too i think
Ps my pic was small cos... Ive no idea lol my original pic was 800kb but when uploaded it turned into a thumbnail ?!
I also have this box. Im currently doing those steps as dave11674.
Got to the android logo keep loading. I gave it 15mins then unplug and plug it again. The box started and android logo went off very quckly and it said setting up apps.. so i took the sd card out... and the screen went black. Im doing it again and this time i will not take the sd card out. We will see...
Anyway i finally going somewhere with my clone box!
-====
Update:
Android 5.1 has started on my box. The problem i have now is there is no wifi or cable internet .... what to do?
hi guys
i have an OTT M8 tv box here
on the pcb there is
XT-s812-v10
2015-08-04
im not sure how to unbrick this
i tried flashing the megatron v3 firmware to it
and now its just a black screen on boot up
i cant get into any recovery menu either
any help here greatly appreciated
on the MCU it says
Amlogic S812 quad core
thanks
dave
[ATTACH=CONFIG]n553069[/ATTACH]
I loaded m8s openelec from just me website works great but the lights are wrong when its on its red when its off its blue otherwise everything works great
hi guys
i have an OTT M8 tv box here
on the pcb there is
XT-s812-v10
2015-08-04
im not sure how to unbrick this
i tried flashing the megatron v3 firmware to it
and now its just a black screen on boot up
i cant get into any recovery menu either
any help here greatly appreciated
on the MCU it says
Amlogic S812 quad core
thanks
dave
[ATTACH=CONFIG]n553069[/ATTACH]
sorry meant to add there are plenty of unbrick procedures on this site that should work for you I think just me posted one
hi guys
i have an OTT M8 tv box here
on the pcb there is
XT-s812-v10
2015-08-04
im not sure how to unbrick this
i tried flashing the megatron v3 firmware to it
and now its just a black screen on boot up
i cant get into any recovery menu either
any help here greatly appreciated
on the MCU it says
Amlogic S812 quad core
thanks
dave
[ATTACH=CONFIG]n553069[/ATTACH]
found this firmware today https://yadi.sk/d/O9-g6-M3mKyZE it works great on the XT-s812-v10 wifi and Ethernet work great so far only issue is instead of blue light when its on its got a red light
found this firmware today https://yadi.sk/d/O9-g6-M3mKyZE it works great on the XT-s812-v10 wifi and Ethernet work great so far only issue is instead of blue light when its on its got a red light
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment