LibreELEC for Tronsmart MIII Plus

[dktn]

It means I go to https://yadi.sk/d/S6KtL-SVuHcLq/SD_USB/20160907 then dowload LibreELEC-S812.MXIII_Plus.arm-7.0.2.5_20160907.img.xz file to my PC.
- use 7zip to unzip LibreELEC-S812.MXIII_Plus.arm-7.0.2.5_20160907.img.xz file became LibreELEC-S812.MXIII_Plus.arm-7.0.2.5_20160907.img
- Use win32diskimage chose LibreELEC-S812.MXIII_Plus.arm-7.0.2.5_20160907.img file then write to SD card
- Put this SD card to M8S while reset button push and the power on.
Do I need to do extra more?(sorry for my English)

[balbes150]

I have M8s with stock firmware like this "n200C-user 4.4.2 KOT49H 20160229 test-keys". I would like to know how the way to install LE on SD card. (Dualboot).

Multiboot universal for all devices on Android 5.1 S905. It should work on 4.4. But I have not tested this version.

[dktn]

I have M8s with stock firmware like this "n200C-user 4.4.2 KOT49H 20160229 test-keys". I would like to know how the way to install LE on SD card. (Dualboot).

[hscotty55]

It was installed on a brand new box that I just opened I installed the correct version LibreELEC-S812.MXIII_Plus.arm-7.0.2.5-update . Like I said, all wilro's versions of OE and LE work perfect. There is something wrong with this version. They are Tronsmart MXIII Plus Android 5.1 2G/16G TV Box Amlogic S812 Quad Core 1000M Gigabit LAN HDMI BT4.0 2.4G/5G Wifi KODI OTG. Board inside says Netxeon M82G V2.1

[balbes150]

There are many different versions, they can use different equipment. To check which version is appropriate for Your console, I recommend to pre-check the external media. On the website there are several options to run from external media.

https://yadi.sk/d/J9pHkMo0uHcKU

[hscotty55]

What model TV set-top box and the image LE ?

Tronsmart MXIII PLUS (both 16G and 8G) using LibreELEC-S812.MXIII_Plus.arm-7.0.2.5-update installed to internal memory. I have used other versions of LE from a different site on 3 other MXIII PLUS systems (16G and 8G as well) and wired LAN works great.

[hscotty55]

Tronsmart MXIII PLUS (both 16G and 8G) using LibreELEC-S812.MXIII_Plus.arm-7.0.2.5-update installed to internal memory. I have used other versions of LE from a different site on 3 other MXIII PLUS systems (16G and 8G as well) and wired LAN works great.

[baroloboys]

I'm having issues on wired lan too, Wirless works fine on Tronsmart MXIIIG with LE 7.0.2.5.

[balbes150]

What model TV set-top box and the image LE ?

[hscotty55]

Anyone else having issues with wired LAN not working? Wireless works fine but I would rather use a wired connection.

[balbes150]

I'm not well versed in video formats. Why not something reasonable will not prompt. If you write that in code view, you can see.

Я плохо разбираюсь в видеоформатах. Поэтому ни чего разумного не подскажу. Если напишите, что посмотреть в коде, могу посмотреть.

[Alexuss]

Запускал с карты. Всё работает неплохо, можно ли при программном декодировании как-то включить HQ Scalers (типа Lanczoc3)?

[balbes150]

The honors option, which is installed in the eMMC from those that run from external media in the dtb file. When installed on the internal memory is used dtb from the internal memory, and when you start from external media is used assembled when assembling the external image from the source, that is). Therefore, for a proper use of external drives, need a working source file that needs to pull out of the console. By the way, the config of the kernel (which works in LE) can be obtained by the command cat /proc/config.gz>config.gz . That is, if the configuration options were awarded this opportunity.

Отличие варианта, который устанавливается в eMMC от тех, что запускаются с внешних носителей в dtb файле. При установке во внутреннюю память используется dtb из внутренней памяти, а при старте с внешнего носителя, используется собранный при сборке образа внешний (из тех исходников, что есть). Следовательно, для правильного использования с внешних носителей, нужен рабочий файл исходников, который надо вытаскивать из приставки. Кстати, конфиг ядра (которое работает в LE) можно получить по команде cat /proc/config.gz>config.gz . Это если в опциях конфигурации была отмечена эта возможность.

[drakulaboy]

installed this on my MXIII-G and it's working, from usb doesn't want to run, but from emmc yes, but no wifi and bluetooth

[balbes150]

Added the files to install to the internal memory (eMMC). The installation is performed via the standard update mode from Android.

https://yadi.sk/d/S6KtL-SVuHcLq