Linux for Amlogic S802 \ S812

[Kentril]

1-Download boot card maker from this link https://drive.google.com/open?id=0By...jdJbmR4UDctNUE
2-Unzip rom that you have downloaded from the link https://drive.google.com/open?id=0By...WU0R0U5RG85Q3M
3-Run boot card maker and in choose disk choose sd card (put sd card to usb sd card reader and connect to pc) ,check yes to partition and format and in options choose your bin file click open options and select u-boot from unzipped rom and than click make .
4-Put all files that are on unzipped folder to sd card ,put u-boot.bin,recovery.img,k200-ota-20141208.zip,aml_autoscript,factory_update_param.a ml to sd card that you have runed boocard maker.
5-Power off the android box and insert the sd card with 5 files and after inserting the sd card use toothpick and you have to put the toothpick on the hole from the back of android box (reset button) and push the power button without removing toothpick and you must wait about 10 second and than remove toothpick and leave the power button and you will see the android icon working.Normally if is the right rom the box shut power on.

Thank you, I followed you instructions and it was working. I think by NAND memory is corrupted, because all is working until I power it off. I need Android to be run directly from SD card. As balbes150 describes. I think this thread is about it.

[tani666]

Kentril the rom that i have posted in the beginning was from n200.you have k200 so the last post will work for your box

[tani666]

1-Download boot card maker from this link https://drive.google.com/open?id=0By...jdJbmR4UDctNUE
2-Unzip rom that you have downloaded from the link https://drive.google.com/open?id=0By...WU0R0U5RG85Q3M
3-Run boot card maker and in choose disk choose sd card (put sd card to usb sd card reader and connect to pc) ,check yes to partition and format and in options choose your bin file click open options and select u-boot from unzipped rom and than click make .
4-Put all files that are on unzipped folder to sd card ,put u-boot.bin,recovery.img,k200-ota-20141208.zip,aml_autoscript,factory_update_param.a ml to sd card that you have runed boocard maker.
5-Power off the android box and insert the sd card with 5 files and after inserting the sd card use toothpick and you have to put the toothpick on the hole from the back of android box (reset button) and push the power button without removing toothpick and you must wait about 10 second and than remove toothpick and leave the power button and you will see the android icon working.Normally if is the right rom the box shut power on.

[tani666]

I've tried renaming and compying files from dts folder, but no luck. Maybe I have different HW - S802, it's k200

try this rom https://drive.google.com/open?id=0By...WU0R0U5RG85Q3M with sd card method

[Kentril]

Send me the dtb file from Your firmware (with which TV box is powered, LE or Android)

https://drive.google.com/open?id=0B8BjC12gn9dwUUlkWkktRUttejg

https://drive.google.com/open?id=0B8BjC12gn9dwMk1MZzFnaHptRXc

Thank you

Jiri

[balbes150]

I've tried renaming and compying files from dts folder, but no luck. Maybe I have different HW - S802, it's k200

Send me the dtb file from Your firmware (with which TV box is powered, LE or Android)

[Kentril]

To run the system you need to manually copy it to the root of the media the correct dtb file with the name "dtb.img" .

I've tried renaming and compying files from dts folder, but no luck. Maybe I have different HW - S802, it's k200

[Kentril]

Have you trayed this firmware with sd card method https://drive.google.com/open?id=0By...mVQUWRRM3VHSVk

Is there any instruction?
Or just simply unzip file onto SDcard? Thank you

[balbes150]

i have usb to ttl but i am not able to see any mesage in putty.What console uart you suggest.I have 2 different usb to ttl but none of them works.Its look like the usb to ttl are only compatible with aurdino or i have made some mistake connection the cable with box.

Any of these modules USB to TTL is suitable for the connection. If there is no display information - so not correctly configured. You can try to swap the Tx and Rx contacts. Sometimes they are signed "on the contrary". More detailed information on configuring the UART is in the section of this forum about S905.

[balbes150]

I've tried booting from SD Card with my MXIII 4k S802 - It seems it has tendency booting from SD card, but then only black screen. Once I managed to see LibreElec Logotype. Does it matter wich build I have on internal memory? I have Teamwin recovery. Thank you

To run the system you need to manually copy it to the root of the media the correct dtb file with the name "dtb.img" .

[tani666]

@menthorul see my link here that i have posted for Kentril maybe one of the firmware will unbrick your mx3 box

[tani666]

or this https://drive.google.com/open?id=0By...WU0R0U5RG85Q3M
or the img from my link https://drive.google.com/open?id=0By...EFkblRXRm5LWlE

[tani666]

I've tried booting from SD Card with my MXIII 4k S802 - It seems it has tendency booting from SD card, but then only black screen. Once I managed to see LibreElec Logotype. Does it matter wich build I have on internal memory? I have Teamwin recovery. Thank you

Have you trayed this firmware with sd card method https://drive.google.com/open?id=0By...mVQUWRRM3VHSVk

[tani666]

the first usb to ttl images are in the links

https://drive.google.com/open?id=0Byi-G_UFV8OVS0oxN1lDTUltWnc

https://drive.google.com/open?id=0Byi-G_UFV8OVa1BRVVd2d0FSTXM

the second usb to ttl images link below

https://drive.google.com/open?id=0Byi-G_UFV8OVVjFkQUJJWDRKalE

https://drive.google.com/open?id=0Byi-G_UFV8OVZEg2bElqVDJGQ3c

[tani666]

You have connected the console UART ?

i have usb to ttl but i am not able to see any mesage in putty.What console uart you suggest.I have 2 different usb to ttl but none of them works.Its look like the usb to ttl are only compatible with aurdino or i have made some mistake connection the cable with box.