Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Linux for Amlogic S802 \ S812
Collapse
X
-
Originally posted by balbes150 View Post
Send me the dtb file from Your firmware (with which TV box is powered, LE or Android)
Thank you
Jiri
Comment
-
Originally posted by Kentril View Post
I've tried renaming and compying files from dts folder, but no luck. Maybe I have different HW - S802, it's k200
Comment
-
1-Download boot card maker from this link https://drive.google.com/open?id=0By...jdJbmR4UDctNUE
2-Unzip rom that you have downloaded from the link https://drive.google.com/open?id=0By...WU0R0U5RG85Q3M
3-Run boot card maker and in choose disk choose sd card (put sd card to usb sd card reader and connect to pc) ,check yes to partition and format and in options choose your bin file click open options and select u-boot from unzipped rom and than click make .
4-Put all files that are on unzipped folder to sd card ,put u-boot.bin,recovery.img,k200-ota-20141208.zip,aml_autoscript,factory_update_param.a ml to sd card that you have runed boocard maker.
5-Power off the android box and insert the sd card with 5 files and after inserting the sd card use toothpick and you have to put the toothpick on the hole from the back of android box (reset button) and push the power button without removing toothpick and you must wait about 10 second and than remove toothpick and leave the power button and you will see the android icon working.Normally if is the right rom the box shut power on.
Comment
-
Originally posted by tani666 View Post1-Download boot card maker from this link https://drive.google.com/open?id=0By...jdJbmR4UDctNUE
2-Unzip rom that you have downloaded from the link https://drive.google.com/open?id=0By...WU0R0U5RG85Q3M
3-Run boot card maker and in choose disk choose sd card (put sd card to usb sd card reader and connect to pc) ,check yes to partition and format and in options choose your bin file click open options and select u-boot from unzipped rom and than click make .
4-Put all files that are on unzipped folder to sd card ,put u-boot.bin,recovery.img,k200-ota-20141208.zip,aml_autoscript,factory_update_param.a ml to sd card that you have runed boocard maker.
5-Power off the android box and insert the sd card with 5 files and after inserting the sd card use toothpick and you have to put the toothpick on the hole from the back of android box (reset button) and push the power button without removing toothpick and you must wait about 10 second and than remove toothpick and leave the power button and you will see the android icon working.Normally if is the right rom the box shut power on.Last edited by Kentril; 01-31-2017, 08:13.
Comment
-
Originally posted by balbes150 View Post
Send me the dtb file from Your firmware (with which TV box is powered, LE or Android)
I followed this instructions:
Burn SD card, rename one file from dts dir and copy into root of SD Card.
run Android and update it from aml_autoscript
restart
is this good procedure? If I want to try another dts file just rename it and boot again? or make aml_update?
I have k200
Thank you
Jiri
Comment
-
Originally posted by balbes150 View PostYou may try all files. To repeat the activation is not necessary (it is saved until the flashing device new firmware when replacing the boot loader u-boot).
You may only view thumbnails in this gallery. This gallery has 1 photos.1 Photo
Comment
-
Originally posted by balbes150 View PostThe startup process is long, need to wait for system start up 5 minutes or more (at this time, the monitor will read "no signal").
Comment
-
Hi everyone
Kentril - do you have M8 Box (k200) with 2 GB RAM? I have the same device and problem with activating multiboot and with boot.
Burn SD card, rename one file from dts dir and copy into root of SD Card.
2. What size of SD card you used?
run Android and update it from aml_autoscript
4. Could you boot Armbian from both SD and USB flash?
Really appreciate to answer this questions. Thanks.Last edited by 4timepi; 02-13-2017, 08:07.
Comment
-
Hello, I have Android TV box MXIII 4K Quad Core Android 4.4.2
I followed this instructions:
aml_autoscript.zip makes it bootable from SD card.
1) Win32 Disk Imager
2) 32 GB SD Card
3) No warrning... Box automaticaly restarted (3 seconds applying the aml_autoscript.zip)
4) I've tried only SD Card
Comment
What's Going On
Collapse
There are currently 8363 users online. 7 members and 8356 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Comment