Minix Neo U1 firmware port for MiniMXIII ánd Mini MX! Prerooted + TWRP recovery

[jmcm]

yes, no need to change the default settings, I just mentioned it because @bubblegum57 said that it ended with signing failed error.
You don't need to install TWRP, you can run it from the SD card as the instructions on 1st post.

[mo123]

Does it also work on MiniMX-G S905?

[bajann]

Does it also work on MiniMX-G S905?

wifi don't work (mini mxiii and mini mx g 2/16 can use same fw but wifi chip is not same)

[KAA]

Based on Minix Firmware: NEO U1 FW010 - 20161012

Change log since FW009A:
1.) Updated Miracast app
2.) Fixed Wi-Fi static IP connection issue
3.) Updated MINIX XBMC app to fix HD audio passthrough issue (Build 20160911)*
4.) Removed system broswer to allow Android system webview support
5.) Added Chrome browser (You may also install your own preferred browsers)
6.) Modification to support up to 5 USB devices
7.) New mouse icon of medium size
8.) Fixed audio issue on some games (e.g. PACMAN 256)
9.) Added a software switch for video layer output (default is still OSD layer)
10.) Fixed some x265 video playback issues (e.g. Dragon Ball Super)
11.) Fixed ghosting, smoke effect on some SD videos

Everything working. Antutu score: 36913

++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++

Firmware : https://mega.nz/#F!d1MhSZzT!Eg6mfZwpfWUPh9hacYsMVw

Files needed per device:

Mini MX (AP6212 version):
recovery.img
MiniX_NEO_U1_FW010_To_Beelink_MiniMX_V1_Ap6212.zip
MiniMX_v1_Ap6212_WiFi_Driver_Patch_FINAL.zip

Mini MX (RT8723 version):
recovery.img
MiniX_NEO_U1_FW010_To_Beelink_MiniMX_V2_RT8723.zip
MiniMX_v2_RT8723 _WiFi_Driver_Patch_FINAL.zip

Mini MXIII:
recovery.img
MiniX_NEO_U1_FW010_To_MiniMX3_FINAL.zip
MiniMX3_WiFi_Driver_Patch_FINAL.zip

Instructions:

Put files on USB stick or SD card
Boot in recovery
Go to advanced wipe, select and wipe Dalvik / ART CACHE, CACHE, SYSTEM, DATA.
Go back and flash two zip files (firmware first, then patch!)
Reboot system.

First boot can take a while.


Source: prohardver.hu

temp high it is normal 75C on youtube

[bubblegum57]

Thanks for the suggestions. But in the end, as I was running LibreELEC from SD card, I just installed to NAND.

[starfall]

i am using a mini mx, i wipe the box following the instruction and flashed the rom. however i got a black screen and only can revert to 107l with usb burning tool
can anyone advises me for flashing this rom?
thanks

[mo123]

i am using a mini mx, i wipe the box following the instruction and flashed the rom. however i got a black screen and only can revert to 107l with usb burning tool
can anyone advises me for flashing this rom?
thanks

I get the same problem on a Mini MX-G S905.

[KAA]

i am using a mini mx, i wipe the box following the instruction and flashed the rom. however i got a black screen and only can revert to 107l with usb burning tool
can anyone advises me for flashing this rom?
thanks

check your wifi model and copy 3 file to usb thumb drive
pull out power and insert usb thumb drive to side port
press reset button and hold than plug in power jack and release reset button
recovery mode pop up and select ***.zip until it reboot and do it same for wifi patch..

[starfall]

check your wifi model and copy 3 file to usb thumb drive
pull out power and insert usb thumb drive to side port
press reset button and hold than plug in power jack and release reset button
recovery mode pop up and select ***.zip until it reboot and do it same for wifi patch..

thanks for your reply
do u know how to check the model?

i flashed two zip and then reboot, it seems i shall flash 1 zip, reboot and then flash the other one?

[KAA]

thanks for your reply
do u know how to check the model?

i flashed two zip and then reboot, it seems i shall flash 1 zip, reboot and then flash the other one?

As stated you need flash main firmware first...

[starfall]

As stated you need flash main firmware first...

i did flash the main zip and then the patch, but i just reboot once after i flashed two zip
i still get a black screen after i flashed the main zip only and then reboot

i also tried the img of Neo U1 FW009 for MiniMXIII, it works for me with wifi not functioning

[KAA]

i did flash the main zip and then the patch, but i just reboot once after i flashed two zip
i still get a black screen after i flashed the main zip only and then reboot

i also tried the img of Neo U1 FW009 for MiniMXIII, it works for me with wifi not functioning

Just flash wifi patch from fw010

[nicolos35]

Just for providing a big thanks about this ROM.I have followed the procedure in order to flash my Beelink Mini MXIII with success. ROM is working fine (wifi included). I'm wondering about the update available inside the ROM (through the Neo update), is it a good idea to launch the update ? I don't think so.. But just to confirm Is it the version FW011 .. ?

[mandepsi]

thanx, this ist the best working ROM with my MiniMX. wifi (AP6212) performance was very bad (about 3 mbs) but after installing (just with twrp) the patch "FIX_WIFI_Mini_MX.zip" wifi works also fine (about 23mbs).

[Bill Decker]

I just opened up my Mini MX to see which of the two WiFi chips it has, turns out it has neither! It's actually the AP6330 chip, would the AP6212 firmware version work OK with mine?