Tanix tx3 mini a 2gb rom

[Gscholtens]

Hi there,

Hope this is the right place to post. I am new here.
At home I have a tanix TX 3 mini a 2gb model.

With a 905w chipset

Want to you use it, for Netflix, Disney, YouTube etc. What's the best way to use it.

The box is going to connect by wifi. No option for cable to this room.

I tried atvxperience, but that is not working correctly with Netflix and Disney.

Stock firmware is, to old.

Wanted to trie coreelec or libreelec. But there is nog working wifi driver for my device.

Please help

[webipsum]

Hi.
I use Netflix and Prime (Amazon) 100% and without problems.
My firmware is original and I just switched the launcher to Apex Launcher Classic.

[Gscholtens]

With firmware u use

[webipsum]

TX3Mini-ota-20171220-Tanix_Box_Com

[Gscholtens]

webipsum saw the text TX3Mini-ota-20171220-Tanix_Box_Com in my mail. Is that correct?

And you use Netflix HD and also Disney?

[webipsum]

Gscholtens

Yes. Name file: TX3Mini-ota-20171220-Tanix_Box_Com.zip

See:
Tanix TX3 Mini Firmware 1GB/2GB + 16GB Image and Update 20171220
Firmware information:
Built version: 20171220
Kind of files: Full image (.img) and manual OTA (.ZIP)
Hardware version:
RAM: 1GB/2GB
Storage: 16GB
http://www.tanix-box.com/download-vi...mage-20170829/

Netflix and Prime Video only.
In my country we still don't have Disney.

[Gscholtens]

Thanks, will try it.
And the apex launcher, where can I find it

[webipsum]

Google Play: Apex Launcher Classic.
See your MP.

[robertoenr]

Hi, I recently buy a TX3 mini S905W 2GB RAM/16GB ROM from Aliexpress. I noticed several things:

• Android preinstalled is 9, but firmware compilation date is 2020-09-29 (quite recent, compared to official firmware from Tanix webpage).
• Opened the box and the Board version is 1.6. Again, so recent compared to 1.1, 1.2 or 1.3 showed on other forums.
• The WIFI module is SP6330-X.
• Tried to boot Coreelec with the toothpick method on botton reset button while power on, but it loads the Android recovery instead booting from SD card. There is no way to boot from SD or USB with this method, always you get the android recovery. Tried also pressing the remote menu button while power on, with no success.

Based on these tests, I have some questions, if anyone knows how to deal with them:

Does anyone knows where to get the stock firmware for this 1.6 board?. I suspect is quite recent and can't find a stock firmware compilation with 2020-09-29 date for this 1.6 board. The most recent I've found is for board 1.3 and dated on 2019-12-10.

How can I enable multiboot on this device?. As I said it has been impossible to boot from SD or USB, always get the android recovery. While the same SD/USB is booting perfect on other TV Box S905W with toothpick method.

Attatch board and preinstalled firmware photos:

https://mega.nz/file/nE4glBTB#yDxjIp...nQjo2pGnpokK_w

https://mega.nz/file/SF5WxRxa#clOe16...v6vM6aZiZTpiHI

https://mega.nz/file/SBgATZaa#iZOMpv...M2vapUmNm_08Cc

https://mega.nz/file/TNhUEJzD#Tj_VAa...IXcehMZkVmrOYM

https://mega.nz/file/iNpE1ZoI#wjq0JP...3yxi2wEi-tzxHc

[robertoenr]

Hi, I recently buy a TX3 mini S905W 2GB RAM/16GB ROM from Aliexpress. I noticed several things:

• Android preinstalled is 9, but firmware compilation date is 2020-09-29 (quite recent, compared to official firmware from Tanix webpage).
• Opened the box and the Board version is 1.6. Again, so recent compared to 1.1, 1.2 or 1.3 showed on other forums.
• The WIFI module is SP6330-X.
• Tried to boot Coreelec with the toothpick method on botton reset button while power on, but it loads the Android recovery instead booting from SD card. There is no way to boot from SD or USB with this method, always you get the android recovery. Tried also pressing the remote menu button while power on, with no success.

Attatch board and preinstalled firmware photos:

https://mega.nz/file/iNpE1ZoI#wjq0JPckXywftwvwKLd8fjJaMwGCk3yxi2wEi-tzxHc

https://mega.nz/file/TNhUEJzD#Tj_VAa...plIXcehMZkVmrO YM
https://mega.nz/file/SBgATZaa#iZOMpv...nrM2vapUmNm_08 Cc
https://mega.nz/file/SF5WxRxa#clOe16...T7v6vM6aZiZTpi HI
https://mega.nz/file/nE4glBTB#yDxjIp..._JnQjo2pGnpokK _w

I found the stock firmware for this TX3 mini version on a vietnam page: https://tinhte.vn/thread/tong-hop-ca...-mini.3022766/

This is the link to stock firmware: https://mega.nz/file/TcID3SyB#9SPAqK...Zy-RNar3WSYw48

Now, I have some questions, if anyone knows how to deal with them:

How can I enable multiboot on this device?. As I said it has been impossible to boot from SD or USB, always get the android recovery. While the same SD/USB is booting perfect on other TV Box S905W with toothpick method.