[ROM Image Firmware] MXQ PRO 4K - p201 - android TV (ATV) - by cOOLio

[saulo]

Sorry, I have found the trick. But now I have this problem.

[george1]

Sorry, I have found the trick. But now I have this problem.

Hi Saulo - ME TOOO - I have MXW PRO 4K S905 D16 V1 15/10/21 board - I have updated the drivers from world cup but I get the same ERASE BOOTLOADER error in you picture. when I Start the flash. I have the same settings as you too.
Have you solved it yet?''
Does anyone out there have a solution.?
I have tried the Coolio provided Amlogic burning tool .2.0.7.2. then also tried the 2.0.5.15 and the 2.0.8_x86 and a "new Usb burning tool" from entertainment box - which turned out to be another 2.0.8 . all stop on the erase bootloader.
when I unclick erase bootloader I get error IDENTIFY DDR USB CONTROL SETUP
Anyon have any ideas on this before I tear the rest of my hair out?

[[email protected]]

Hi,

I installed this firmware on MXQ pro s905 device. Unfirtunately, IR Remote is not working after shutting down.

Please help me.

Thank you

[Polvom]

I have tried the Coolio provided Amlogic burning tool .2.0.7.2. then also tried the 2.0.5.15 and the 2.0.8_x86 and a "new Usb burning tool" from entertainment box - which turned out to be another 2.0.8 . all stop on the erase bootloader.
when I unclick erase bootloader I get error IDENTIFY DDR USB CONTROL SETUP
Anyon have any ideas on this before I tear the rest of my hair out?

I had the same issue. In the end I used v2.0.5.15 of the "USB Burning Tool" to flash a stock ROM then Coolio's. In fact I had bricked the box. I had to short two pins on the motherboard to bring it back to life...

[Polvom]

I have experienced some freezing in YouTube and noticed that the ROM that this one is based on, Ugoo's, mentions similar issues have been fixed.

Is there any (easy) way to fix these issues with this firmware?

[Ada74]

Hello,
Thank you for the job. I've put it on my mxq pro and it seems to work, but not the remote.
I wanted to try to replace the file in the box, but my box isnt't recognize by my computer. Is that normal ? Is there a fix for this ?
Thanks

[mushonovster]

Please please please i need help I installed this system On my BEELINK M18 TV BOX And it works But not working me no internet no wireless internet and no remote control Please port it To my device or help me fix this https://www.entertainmentbox.com/bee...ware-download/
I'm currently using a mouse

[Ada74]

Hello,
Sorry for my 2nd post but how Can we turn on and off the box with keyboard please ? I didnt find.
Thanks

[AxEgo]

Thank you for this ROM. I flashed it to my box and it runs fine, but a little bit slow.

Any chance this ROM is going to be updated to Android 7 or Android 6?

[krappa]

My problem is my remote that comes with the box doesn't work.
I did manage to backup my stock rom/original remote config file and it somewhat works. The volume up and down don't work, the Enter/OK button in the middle doesn't work, the back and home doesn't work.
Through trial and error I did find the enter/ok button and the back button which is #5 on my remote for some reason.
My original stock rom is NEXBOX 5.1.1 MXQ PRO 4K.

I will provide some files now.

My original remote.cfg

#*********************************************************************************************************
#this file is configuration for each factory remote device
#     work_mode      0 :software mode  1 :hardware mode
#    repeat_enable      0 :disable repeat 1 :enable repeat    
#
#    factory_code      each device has it's unique factory code.
#              pattern:custom_code(16bit)+index_code(16bit)
#              examble: 0xff000001 = 0xff00(custom cod)  0001 (index)
#
#    release_delay      unit:ms.release will report from kernel to user layer after this period of time
#              from press or repeat triggered.
#
#    debug_enable      0 :debug disable  1 :debug disable
#
# SW MODE:
#    bit_count      how many bits in each frame      
#    tw_leader_act      time window for leader active
#    tw_bit0          time window for bit0 time.
#    tw_bit1          time window for bit1 time
#    tw_repeat_leader  time window for repeat leader
# REG
#    reg_base_gen      set value for PREG_IR_DEC_BASE_GEN    
#     reg_control      set value for PREG_IR_DEC_CONTROL
#    reg_leader_act      set value for PREG_IR_DEC_LEADER_ACTIVE
#    reg_leader_idle      set value for PREG_IR_DEC_LEADER_IDLE
#    reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
#    reg_bit0_time      set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#amlogic NEC remote
factory_infcode = 1
factory_code    = 0xfe010001
work_mode          = 0
repeat_enable = 1
repeat_delay = 40
repeat_peroid = 39
release_delay    =    121
debug_enable     = 0

fn_key_scancode    = 0x00
left_key_scancode  = 0x51
right_key_scancode = 0x50
up_key_scancode    = 0x16
down_key_scancode  = 0x1a
ok_key_scancode    = 0x13
pageup_key_scancode = 0x04
pagedown_key_scancode = 0x1b

mouse_begin
        0 0x51
        1 0x50
        2 0x16
        3 0x1a
mouse_end

key_begin
        0x41 113
    0x10 114
    0x18 115
    0x51 105
        0x16 103
        0x50 106
        0x1a 108
    0x13 97
    0x19 158
    0x11 172
    0x40 116
    0x4c 139
        0x4e 2
        0x0d 3
        0x0c 4
        0x4a 5
        0x09 6
        0x08 7
        0x46 8
        0x05 9
        0x04 10
    0x01 11
        0x42 14
        0x0f 392
    0x43 141  
key_end
repeat_key_begin
        0x41 113
    0x10 114
    0x18 115
    0x51 105
        0x16 103
        0x50 106
        0x1a 108
    0x13 97
    0x19 158
    0x11 172
    0x40 116
    0x4c 139
        0x4e 2
        0x0d 3
        0x0c 4
        0x4a 5
        0x09 6
        0x08 7
        0x46 8
        0x05 9
        0x04 10
    0x01 11
        0x42 14
        0x0f 392
    0x43 141  
repeat_key_end

now here are the two values I found:

0x05 15 #Enter #oldback

0x54 6   #Back #oldNo.5

I would appreciate any help.

[AxEgo]

My problem is my remote that comes with the box doesn't work.

I would appreciate any help.

http://goo.gl/K9BAAK

[SirMcFrosty]

I need your help guys. I dont get my Remote working after flashing Coolios Firmware.

My Board is a MXQ S905 V2 20151112 1G/8G with a RTL8189ETV WiFi

I searched and read all i could find. Even tried various remote files (but it is never clear from which remote/box exactly it was).

(stupid me that i flashed new firmware before i saved the remote configs)

(i found a hint to the original Firmware - but i suspect it wasnt as there the remote doesnt work too - as well as the LED Color behaviour since i flashed Coolios)

i attach some pics of my Board and remote. May be anybody has fitting files for me.

btw Thanks Coolio for the new Firmware. with exception of the LED Color (only blue instead of red and blue) it runs fine. May be you could find time and update it a bit and tweak it a bit more if possible

[krappa]

Hello, I have a problem with wifi. It shows my wifi but when you put password and connect it does not work. It says "Couldn't Find Wifi, Try Again"

[alexan_teelk]

I'm having a weird issue. The box I'm working on already had this ROM installed on it, for reasons I won't get into I had to flash it again. Now with a fresh flash, there's no wifi. Anyone know why this might have happened?

[soldiaz]

S905 right?