M8S PRO W-userdebug 7.1.2 NHG47L 20180724.093649.v0213, Blue Board: M8S_W_REV2.2

[geotzia]

in twrp if you click reboot to system i think it asks you if you want to install permanently

Unfortunately not, I cannot use twpr permanently...

[takizzz]

in twrp if you click reboot to system i think it asks you if you want to install permanently

[geotzia]

Hello

You have to try videostronf method,

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s905/others-ac/firmware-roms-tools-bj/752605-rom-oem-mecool-m8s-plus-w-android-tv-by-videostrong/page5

Ιn my case i couldn't overwrite the dates on the second file and therefore i couldn't flash cause installation stopped when it recognised that the firmware was older than the one already installed.

Has anyone flashed TWRP , and is there any available link?

I have good news and bad news...
the good news are that i found a twrp for our box. You can download the zip file and flash it through update app.Then you have twrp and you can do backup or restore. https://drive.google.com/file/d/1x1b...MZ77Ij-nb/view

The bad news are when you reboot to recovery the box reboot to stock recovery but you can do the same procedure (flash twrp and make restore or ..backup)

[geotzia]

I want to add that pro w firmware is Android TV and for me is not practical at all...
Any news with TWRP?

[takizzz]

colbaip i didn't test any of these because it was lagging in the launcher and i couldn't change launcher so i got back to stock...yes you flash the plus w firmware with usb burning and then you flash the pro w firmware through update app

[colbaip]

d3ckart you can now install the firmware from #1 post which is android or the the firmware in the #2 post (folder PRO W) which is android TV through the update app...

Hello takizzz when you installed the ATV M8S_PRO_W-ota-20180312.181951.V0213, everything worked fine. Wifi, remote control, HD Google and HD Netflix, no Lag etc?

can you tell me when you rescue the box, you use USB_burning_tool with the image M8S_PLUS_W 20180622.img that is in the RAR file?

[geotzia]

I tried to flash twrp from https://forum.atvxperience.com/viewtopic.php?t=87 with no luck ( twrp.img is stretched out (only 1/4 the image is shows)

[d3ckart]

I am in exactically same case... i tried to flash the firmware from #1 post throught updater app but stoped with -error in section 7, installation aborted- as i said above, and the firmware from #2 post its ok but it is ATV not practical at all so i roll back to Mecool Plus firmware

Hello

You have to try videostronf method,

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s905/others-ac/firmware-roms-tools-bj/752605-rom-oem-mecool-m8s-plus-w-android-tv-by-videostrong/page5

Ιn my case i couldn't overwrite the dates on the second file and therefore i couldn't flash cause installation stopped when it recognised that the firmware was older than the one already installed.

Has anyone flashed TWRP , and is there any available link?

[geotzia]

I had bricked mine , couldn't flash anything through usb tool ( stuck at 7% ) and recovered it with mecool plus firmaware. Therefore the device is recognised as a PLUS device and not PRO therefore an error comes up notifying me that cant flash on different device although its the same.

I tried videostrong method but cannot rename dates ( not have rights)

That's my case , anyone who can help is welcome. I have wasted too much time but still want to revert it to PRO device

I am in exactically same case... i tried to flash the firmware from #1 post throught updater app but stoped with -error in section 7, installation aborted- as i said above, and the firmware from #2 post its ok but it is ATV not practical at all so i roll back to Mecool Plus firmware

[takizzz]

d3ckart you can now install the firmware from #1 post which is android or the the firmware in the #2 post (folder PRO W) which is android TV through the update app...

[d3ckart]

d3ckart what problem do you have? it gives you error in usb burning tool or in the updater?

I had bricked mine , couldn't flash anything through usb tool ( stuck at 7% ) and recovered it with mecool plus firmaware. Therefore the device is recognised as a PLUS device and not PRO therefore an error comes up notifying me that cant flash on different device although its the same.

I tried videostrong method but cannot rename dates ( not have rights)

That's my case , anyone who can help is welcome. I have wasted too much time but still want to revert it to PRO device

[geotzia]

geotzia are you sure you have this box rev 2.2 with the blue board? because i tried both firmwares and flashed ok with no problems...if you don't have this board take a look at the custom rom from magendanz

I have this board and i tried to flash from this rom...

[takizzz]

geotzia are you sure you have this box rev 2.2 with the blue board? because i tried both firmwares and flashed ok with no problems...if you don't have this board take a look at the custom rom from magendanz

[geotzia]

geotzia you can flash the rom in the #1 post which is the stock android nonATV...from my experiense only these stock roms work i can't find any custom rom that works...

Today i tried to flash it throught updater app but stoped with -error in section 7, installation aborted- (if i remember right)

[takizzz]

i i think i used universal twrp for s905 devices but i can't find a link or the file to upload it...