Manufacturer HongXin
Model x96mini
Android version 7.1.2
CPU 4 cores; AArch64 Processor rev 4 (aarch64) gxl; Max: 2016,0 MHz; Min: 100,0 MHz
Display 1280 x 720; DPI: 160; Evaluated Size: 9,2"
GPU Mali-450 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM 2048 MB (1948 MB available)
Flash 16 GB (11.281 GB actual);
Processor : AArch64 Processor rev 4 (aarch64)
processor : 0
processor : 1
processor : 2
processor : 3
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 wp half thumb fastmult vfp edsp neon vfpv3 tlsi vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : Amlogic
KERNEL: Linux version 3.14.29 (ren@gxt)
Mainboard: p212
BRAND: Amlogic
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: hx_s905x
DISPLAY: hx_s905x-userdebug 7.1.2 NHG47L 20200521 test-keys
FINGERPRINT: Amlogic/hx_s905x/hx_s905x:7.1.2/NHG47L/20171025:userdebug/test-keys
HARDWARE: amlogic
ID: NHG47L
TAGS: test-keys
Whenever I try to flash roms, some soms show :
-----------ERASE BOOTLOADER------------
[01:40:33 530][HUB1-2][Inf]--start SendIdentifyCmd
[01:40:33 530][HUB1-2][Inf]--2-4-0-0
[01:40:33 531][HUB1-2][Inf]-------------Download DDR.USB-----------
[01:40:33 531][HUB1-2][Inf]--2-4-0-0
[01:40:33 531][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[01:40:34 033][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[01:40:34 535][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[01:40:35 036][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[01:40:35 536][HUB1-2][Inf]--Write initial succeed
[01:40:35 536][HUB1-2][Inf]--Upload encrypt at 0xc8100228
[01:40:35 536][HUB1-2][Inf]--ulValue = 0xadfc318c
[01:40:35 536][HUB1-2][Inf]--Read encrypt value succeed
[01:40:35 536][HUB1-2][Inf]--Download DDR.USB,size: 49152!
[01:40:35 545][HUB1-2][Inf]--Transfer complete 49152
[01:40:35 545][HUB1-2][Inf]--Run at address 0xd9000000
[01:40:35 545][HUB1-2][Inf]--RunInRam success
[01:40:35 558][HUB1-2][Inf]--2-2-0-8-0-1-0-0
[01:40:35 558][HUB1-2][Inf]--CheckFileRunState return 8
[01:40:35 558][HUB1-2][Inf]--Run at address 0xd900c000
[01:40:35 558][HUB1-2][Inf]--RunInRam succeed
[01:40:35 898][HUB1-2][Err]--ReadLargeMemCMD failed ret = -5
[01:40:35 898][HUB1-2][Err]--ReadPara failed
[01:40:35 902][HUB1-2][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
and some roms show:
[01:39:02 455][HUB1-2][Inf]--------------ERASE BOOTLOADER------------
[01:39:02 556][HUB1-2][Inf]--start SendIdentifyCmd
[01:39:02 556][HUB1-2][Inf]--2-4-0-0
[01:39:02 556][HUB1-2][Inf]-------------Download DDR.USB-----------
[01:39:02 556][HUB1-2][Inf]--2-4-0-0
[01:39:02 556][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[01:39:03 057][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[01:39:03 559][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[01:39:04 060][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[01:39:04 560][HUB1-2][Inf]--Write initial succeed
[01:39:04 560][HUB1-2][Inf]--Upload encrypt at 0xc8100228
[01:39:04 560][HUB1-2][Inf]--ulValue = 0xadfc318c
[01:39:04 560][HUB1-2][Inf]--Read encrypt value succeed
[01:39:04 560][HUB1-2][Inf]--Download DDR.USB,size: 49152!
[01:39:04 569][HUB1-2][Inf]--Transfer complete 49152
[01:39:04 570][HUB1-2][Inf]--Run at address 0xd9000000
[01:39:04 570][HUB1-2][Inf]--RunInRam success
[01:39:04 927][HUB1-2][Inf]--IOCTL_IDENTIFY_HOST_Handler ret=-5 error_msg=libusb0-dll:err [control_msg] sending control message failed, win error: A device attached to the system is not functioning.
[01:39:04 935][HUB1-2][Err]--[0x10105004]Romcode/Initialize DDR/Read initialize status/Error result
I know you have connections with chinease developers. Please help me regarding this.
Once again thanks.
Comment