Looking img4flash MXQ PRO 4k (S905X) Any firmware.

[UserD]

Hello guys. I'm looking this so far.
I receive some of these tv boxes and i need to re-flash them.
This is something like clones or counterfeit, don't know. No contact with supplier to ask. You are my last hope)
This is tvbox has standard mark "MXQ PRO 4k" On PCB maked H234_V3.0_171115 (google says nothing about this)
Inside installed s905x chip (i remove heat sink and see) and combined RAM&FLASH chip "24C0475-002.A000 293728.01" from taiwan (can't found datasheet)
Wi-fi chip sv6051 (but i don't mind, i always use cable)
Inside installed Android 7.1.2
Kernel 3.14.29 ren@gxt #23
Build number MXQ_PRO-userdebug 7.1.2 NHG47L 20171218 test-keys Rev. G6
1 gb RAM / 8 gb Nand flash
Maybe someone know or find firmware for USB Burning Tool for reflash that piece of something)
Maybe you ask me, why i need reflash?
I have one bricked, and one stock flashed working device. And look in future for repair some of these devices

[neomode]

Hello,

Here you find the last firmware for it.

https://drive.google.com/file/d/0BwMPYQO7_w6LN2FubFZ0eWV6U0E/view?usp=drivesdk

This can be burned with PC.

Neomode

[UserD]

Thanks for answer, but i can't flash this fw. When i install SD card and press recovery button my tvbox stuck on boot logo (s905x image)
Default recovery isn't recovery, it's just start wiping system and all. No menu.
Can be burned from PC? It's zip, not IMG or I do not know something,

[ouro]

Hello,

??????Here you find the last firmware for it.
https://drive.google.com/file/d/0BwM...w?usp=drivesdk

This can be burned with PC.

Neomode

poderia reenviar o link esta quebrado,tem q ser img pq ota nao vai....

[ouro]

Hello,

Here you find the last firmware for it.

https://drive.google.com/file/d/0BwMPYQO7_w6LN2FubFZ0eWV6U0E/view?usp=drivesdk

This can be burned with PC.

Neomode

link quebrado poderia me ajudar;;

[aidanmacgregor]

this is my own rom for s905x boxes, i made it on my mxq pro 4k 1gb and is not laggy like all the roms i tried frolm other people, also works on 2gb ram models and i have added lots of wifi drivers

https://forum.xda-developers.com/android-stick--console-computers/amlogic/rom-aidans-android-tv-custom-rom-7-1-2-t4104869

[ouro]

this is my own rom for s905x boxes, i made it on my mxq pro 4k 1gb and is not laggy like all the roms i tried frolm other people, also works on 2gb ram models and i have added lots of wifi drivers

https://forum.xda-developers.com/and...7-1-2-t4104869

tentei afora mais nao foi ,vai ate 2% e para como as outras q tentei;

[ouro]

this is my own rom for s905x boxes, i made it on my mxq pro 4k 1gb and is not laggy like all the roms i tried frolm other people, also works on 2gb ram models and i have added lots of wifi drivers

https://forum.xda-developers.com/and...7-1-2-t4104869

essa rom nao vai . so vai ate 2% como as outras q tentei.

[aidanmacgregor]

ok, isso geralmente significa que há um problema com o arquivo DTB ou o arquivo DDR.usb na ROM do UBOOT, 2 possibilidades, 1 caixa na verdade contém chipset diferente (por exemplo, s905W, s912 ect ...) Eles nem sempre vendido rotulado corretamente, você pode abrir a caixa para confirmar se realmente é s905x ou tudo o que posso sugerir é tentativa e erro e apenas piscando até que funcione, Se você receber uma ROM para inicializar na sua caixa, avise-me e posso adicionar os arquivos corretos à minha ROM

[ouro]

sim ela e igual a foto do topico tirei o dissipador s905x v3.0

[ouro]

e a mesma placa;

[aidanmacgregor]

Imagem corrompida

[aidanmacgregor]

yhea i can see its s905x in first image (now i look) and your box has a weird layout, the reset button is on the other side comared to mine and logic board look different

[ouro]

yhea i can see its s905x in first image (now i look) and your box has a weird layout, the reset button is on the other side comared to mine and logic board look different