Android Tv box T95 S1 -S905W corrupt stuck on logo screen - uart log Help Please

[ph086]

Hi so i have a T95 S1 Amlogic S905w 2gb Ram and 16gb rom.


History: So i have this box fitted in the car to head reset displays sometimes we don't turn it off before we turn the car power off.

Issue: One day it was not powered off correctly and on reboot it was stuck on the T95 S1 LOGO screen.

What i have tried so far.
1. Reset switch not loading recovery
2. Connected to PC using A to A USB and run img file onto the box using Amlogic_USB_Burning_Tool ( Same issue )
3. Run loaded image onto SD card using Burn_Card_Maker ( Same issue )
4. Connected to uart usb and copied the log from boot. SORRY its a text file could not load code onto page.

Any help getting this box back working would be greatly appreciated thanks.

[gefattern]

Hi so i have a T95 S1 Amlogic S905w 2gb Ram and 16gb rom.


History: So i have this box fitted in the car to head reset displays sometimes we don't turn it off before we turn the car power off.

Issue: One day it was not powered off correctly and on reboot it was stuck on the T95 S1 LOGO screen.

What i have tried so far.
1. Reset switch not loading recovery
2. Connected to PC using A to A USB and run img file onto the box using Amlogic_USB_Burning_Tool ( Same issue )
3. Run loaded image onto SD card using Burn_Card_Maker ( Same issue )
4. Connected to uart usb and copied the log from boot. SORRY its a text file could not load code onto page.

Any help getting this box back working would be greatly appreciated thanks.

Hi ,

there is another Way you can try the BootCardMaker Tool Way ,

good luck / gefattern

[sagert]

There is a video and description from superceleron on the site how to restore boxing with UART.

[ph086]

Hi gefattern
Thanks for the reply any help at all is really appreciated.

I tried BootCardMaker it loads the image onto the box but it still stays on the logo screen.

Hi ,

there is another Way you can try the BootCardMaker Tool Way ,

good luck / gefattern

[gefattern]

Hi gefattern
Thanks for the reply any help at all is really appreciated.

I tried BootCardMaker it loads the image onto the box but it still stays on the logo screen.

Hi ,

looks like something is wrong with booting , can you reach Recovery & wipe all ,

maybe , maybe , it helps ??? is it really the correct Stockrom ??? , for restore always

Stockrom is the best , what about "shortPins" Way not stock flashing , so repair is done ,

i think ???

further good luck / gefattern

[ph086]

There is a video and description from superceleron on the site how to restore boxing with UART.

Hi Sagert,

i had a look but cant find the video to fix boot with uart.

[ph086]

Hi ,

looks like something is wrong with booting , can you reach Recovery & wipe all ,

maybe , maybe , it helps ??? is it really the correct Stockrom ??? , for restore always

Stockrom is the best , what about "shortPins" Way not stock flashing , so repair is done ,

i think ???

further good luck / gefattern

Hi Gefattern,

the stock image only has one file .img
when i flash it to the box with sd card maker or pc to usb it still only loads to the logo screen
i cant reach the Recovery & wipe even shorting the pins

[ph086]

Here is the Box i got from Amazon

https://www.amazon.co.uk/gp/product/...?ie=UTF8&psc=1

Here is the firmware i got.

https://drive.google.com/file/d/1sfSKGmONlidWhoowk10GWilKpP7BhsUA/view?usp=sharing

Here is the pins i shorted out

[sagert]

If you use uart, read and watch.


https://forum.freaktab.com/forum/tv-...tv-build/page4



https://mega.nz/#!htpHSAzS!Y1JEKGvNE...1mvXNZ0a3rbRQs

[ph086]

If you use uart, read and watch.


https://forum.freaktab.com/forum/tv-...tv-build/page4



https://mega.nz/#!htpHSAzS!Y1JEKGvNE...1mvXNZ0a3rbRQs

Hi Sagert,

So i follower the link but im still getting the same issue stuck on logo

here is my install /boot log

https://pastebin.com/kNuDM2LU

[Tiagocxs]

Hello friends! I have the same problem, it already replaces roms, but they are on the same screen and even doing reset does not leave the initial boot. I have already performed all the procedures listed by the friend Ph086 My box is a Nexbox A95x S905w 8/1 Wifi Sv6051