[ROM] XannyTech Custom Mod Rom + TWRP Recovey built-in - for MINIM8SII and other devices see first post.

[scooter2014]

I have a few 905x ill try on few of them m8mini rupa/x96 think 2 more tanix maybe if someone hasnt stolen it yet lol..

[scooter2014]

I missed this for long time sorry Just Sticky it in firmware.

[Xannytech]

I missed this for long time sorry Just Sticky it in firmware.

No problem at all

[bajann]

OK, it's in upload is totally untested.
On which device will you test it?

I have beelink mini mxiii ii 32gb,I'm rdy

[MasterBoy71]

Silence?

I will test 2!

[Xannytech]

Silence?

I will test 2!

Device/wifichip ?

[Xannytech]

To All:
Very low interest for 9377 chip rom, but when i was busy i read so many request

Anyway HERE is the Final Test2 not for 9377 chipset, a totally rebased rom, framework changed and revised, many glitches solved, has also a rgb fix(for philips and sony old tv) inside setting (but if you activate it you need to unplug and replug hdmi cable).
Let me know.

[MasterBoy71]

QcoQce TX5PRO S905X 9377 chipset and 2GB RAM & 16GB ROM!
Thx in Advance!

;-)

[Xannytech]

QcoQce TX5PRO S905X 9377 chipset and 2GB RAM & 16GB ROM!
Thx in Advance!

;-)

you got PM

[MasterBoy71]

Sorry but get ERROR ---> [0x30702004]Uboot/Temprature Testting/Get result/Out of range

Whats happen?

Markus

EDIT: Back on Backup!

[Xannytech]

Sorry but get ERROR ---> [0x30702004]Uboot/Temprature Testting/Get result/Out of range

Whats happen?

Markus

EDIT: Back on Backup!

reply me in pm about private testing...
anyway, i don't know it has been tested on three device until now, no problem of this kind.
I found a result googling and happened to your same device:
"Its the driver, uninstall burn tool. Keep device plugged in go to control panel. Right click on usb device (It will most likely have yellow sign on it) remove it un plug device. Download usb burn tool 2.7 one pc reboots run install program for usb burn tool 2.7. Open tool once drivers finished installing then select rom click Start now your ready to connect device into inside usb port. Should work now."

Or try (i never tested it) : BootcardMaker v2.0.0.2

[scooter2014]

That easy fix just raise temp in tool settings some devices do this.

[LostEchoes]

reply me in pm about private testing...
anyway, i don't know it has been tested on three device until now, no problem of this kind.
I found a result googling and happened to your same device:
"Its the driver, uninstall burn tool. Keep device plugged in go to control panel. Right click on usb device (It will most likely have yellow sign on it) remove it un plug device. Download usb burn tool 2.7 one pc reboots run install program for usb burn tool 2.7. Open tool once drivers finished installing then select rom click Start now your ready to connect device into inside usb port. Should work now."

Or try (i never tested it) : BootcardMaker v2.0.0.2

Xannytech,

just let me point out that I used Amlogic Burn_Card_Maker v2.0.2 to burn your TestBeforeFinal1 rom to a SD card and it worked just fine on my Mini M8S II a few days ago.

http://chinagadgetsreviews.com/download-amlogic-burn_card_maker-v2-0-2.html

[Xannytech]

Xannytech,

just let me point out that I used Amlogic Burn_Card_Maker v2.0.2 to burn your TestBeforeFinal1 rom to a SD card and it worked just fine on my Mini M8S II a few days ago.

http://chinagadgetsreviews.com/downl...er-v2-0-2.html

thanks

[Lordgoku]

To All:
Very low interest for 9377 chip rom, but when i was busy i read so many request

Anyway HERE is the Final Test2 not for 9377 chipset, a totally rebased rom, framework changed and revised, many glitches solved, has also a rgb fix(for philips and sony old tv) inside setting (but if you activate it you need to unplug and replug hdmi cable).
Let me know.

So, is there many changes between FinalTest1 and FinalTest2?