[ROM] Mecool/Acemax KI PRO SCV1 ATV - Android 7.1.2 ( Android Tv Version )

[Beskinhas]

First you have to do the recovery with KI_PRO_AVL6862-ota-20181221.141952.V0213
and then put the new firm
KI_PRO_AVL6862-ota-20190314.112408.V0213

This is the original firmware right? I like to use Android TV for its more "clean" and organized, will we soon have the correction of the DTV app for mecool k1 Pro support custom firmware, sold after November 2018?
thanks your help PAUL-A8

[PAUL-A8]

First you have to do the recovery with KI_PRO_AVL6862-ota-20181221.141952.V0213
and then put the new firm
KI_PRO_AVL6862-ota-20190314.112408.V0213

[Beskinhas]

Please help me i flahs this firmware and DTV give a error "can detect demod/tunner" my k1 pro arrived today please have solution for this? Thanks

[pepecop]

Any idea how solve it on ftmc?? this shoot is on 4k thanks!!!

[soldiaz]

I own a HST 260S (Satellite receiver included) manufactured by Sen5 and sold in GERMANY on Marshmallow.

Dual WiFi, 2gb RAM, 8gb rom.

can I flash this?

[konkense]

I got root in offical Rom.

I got the TWRP recovery.img for KI pro,
I restarted in recovery mode with the recovery.img in a pendrive, then i seen 2 options:
Flash TWRP into KI or Readonly (just run the TWRP recovery without intall it in rom)
I chose the Readonly option and run TRWP install option to install Magisk zip,..
reboot Magisk installed and root is working!!!

[konkense]

Yes download Magisk and use update app local

Hi, could u explain the steps to install Magisk root?
Is it posible to do from the offcial, stock rom or i need scv1?

I tried to install the magisk zip from the recovery in official rom, but i get an error, something like "error checking zip. incorrect update version".
From manager apk i see an option to patch boot.img but i dont know what to do with the boot.img

Thanks a regards.

[bylderup]

wetek play air is coming to the market with S905D chipset and Android Oreo - but locked bootloader and 100 Mbit LAN..

well - is there any chance to see an Oreo update for the Mecool KI pro in the future ?

[C0MPAQ]

Please, can someone tell me exactly how to boot into recovery or flash the ROM when the device doesn't boot anymore?

Specifically, when SuperCeleron's ROM was already flashed ... which should then include TWRP(?) which could make it different than before(?)

Last time I flashed the ROM, I believe I had to unplug the device, attach a standard FAT32 formatted USB storage dongle (and not use the TF slot), keep pressing the power button while plugging in the power and then it would boot into the stock-recovery from where I flashed SuperCelerons ROM which ran fine for a year ... until yesterday.

I definitely didn't flash from inside the OS! Because my box didn't had the "Update" App installed stock. That much I remember.

Now I tried to boot into whatever recovery, and it just doesn't work! It always boots to the initial screen and is stuck there: "android tv powered by superceleron with the blue lazer eyed robot". I can even attach an USB keyboard and press CTRL-ALT-DEL to make it reboot ... so that tells me I am not pressing the right buttons or something, because this is no recovery mode at all.

I don't see how there are any more but this one option to do it, so please describe exactly how you boot directly into flash mode / recovery mode with this box. If you ever did it this way before.

I am thinking that maybe my USB stick isn't correctly FAT32 formatted or something, I don't know. But maybe its just broken and I keep going out on limbs in circles for hours and nothing will ever do the trick? Please help.


BTW! I just found a reset(?) button at the bottom of the machine, but it does nothing whatsoever in my case no matter when its pressed and how long its pressed. I did not use this the first time definitely never even knew it was there its so hidden. I am thinking now, maybe I need to flash from TF card and it needs a TF card for recovery to show up. Damn I am already an hour at this. Trying all sorts of stuff.

OK ... so I inserted a TF card into the slot from my phone with the firmware and guess what: nothing whatsoever works. I am fairly sure that I used a standard USB mass storage stick before, not the TF card slot since that didn't work. But I am not 100% sure about this... Please help. I am pressing this button, then that button, then this and that and whatever ... it takes for ever to trial and error this.

I seem to have found a difference: When I plug in the device while holding power, I can press CTRL+ALT+DEL later with a keyboard and it will cause a failed reset (screen blank, doesn't boot). But when I boot normally, CTRL+ALT+DEL has no effect.

So, it seems its broken very weirdly and I need to use another method.

How does it work to flash over male-to-male USB?

Again, can someone please describe the male-to-male USB flash procedure in more detail? - because I have no way of telling if any of the stuff is supposed to be like that or not like it with a maybe half broken device.

HOW TO FLASH ROM MALE2MALE USB (PC to Box) METHOD:

You want to do this only if your box is entirely bricked, since you can only flash special stock firmware images this way.

1. Make male2male USB connector. Just cut apart two USB cables and wire stuff 1:1 together, green to green, red to red, black to black, white to white. So you can plug into PC and into Ki Pro.
2. Plug the male2male USB cable into the lower left USB port of the box. Or else it will not be recognized.
3. Get the special stock firmware img file from somewhere (the regular ROM ZIPs won't work!). If you are lucky this link still works: https://forum.xda-developers.com/sho...2&postcount=14
4. Follow the Video https://www.youtube.com/watch?v=TgFiB1FnEak on how to use USB Burning Tool provided in the video and how to load and flash.

[Rochina37]

Hay nueva rom para mecool KI pro de supercelerom?

[cataplas]

How is the update going?

[meculero]

Help please!

My tv box does not turn on, when I plug it in, it does not do anything, just blink the button light in red and blue and nothing appears on the TV

[chaveiro]

How to upgrade to the latest DTV application from the stock image that is recent (and better) than the provided with this version?

[chaveiro]

Any one has the link for the latest stock firmware ?

[tosu]

Enter this message periodically to see news and problems corrected. Always with the hope of finding a version 2 of this firmware.
I know you do not have time to do it. This message is just to remind you that we are still interested in updates and that you do not leave this box.
We hope that not too late you will find the time you need for this firmware.
Many people have this box and it continues to sell as well as the first day.

Thanks.