ATV9-MOD-(P212)AMPERE-V3

[bumerc]

wrong, you shouldn't take the second command 1:1, it's just an example.
But I don't see an SDcard under mounts.. Did you insert the SDcard into the cardreader of your box?

[Leiden]

wrong, you shouldn't take the second command 1:1, it's just an example.
But I don't see an SDcard under mounts.. Did you insert the SDcard into the cardreader of your box?

I do not have any experience with putty, but it is only attempts to change the remote control file. I needed more explanation and clarification in order to be able to do that,i nsert the SDcard in tv box.
Thank you.

[RiCkLaR_atvX]

I do not have any experience with putty, but it is only attempts to change the remote control file. I needed more explanation and clarification in order to be able to do that,i nsert the SDcard in tv box.
Thank you.

Sounds like this ROM is not for you. Did you not read this line in first post: "volunteer testers for this," -- You tested it, ROM didn't work for you! So, go back to your original ROM. Thank YOU.

[Leiden]

My problem is just replacing the remote file, my box is s905x
thank you

[bumerc]

My problem is just replacing the remote file, my box is s905x
thank you

1. Install bc-tool in afck
2. Copy aml_upgrade_package.img to ~/afck/ingredients/
3. Extract the aml_upgrade_package.img

cd ~/afck

# this command only needs to be executed once at the time of installing bc-tool

export MAKEFLAGS='--no-print-directory'

#extract aml_upgrade_package.img

make mod-unpack

4. Rename your working remote.conf file to remote1.tab and replace the existing remote1.tab in ~/afck/bc-tool/vendor/vendor/etc/
5. Recompile the vendor partition

make mod-vendor

6. Build a new installation image (aml_upgrade_package.img)

make mod-IMG

# You can find new aml_upgrade_package.img in the ~/afck/bc-tool/out/ directory

7. Install aml_upgrade_package.img on your device and enjoy it

[Falconyk]

Hello. Can you lay out the drivers on the 6330 separately?
Or how to replace the remote file? Buttons on my x96 box do not work correctly.

[bumerc]

Hello. Can you lay out the drivers on the 6330 separately?

Extract *.img and take what you need

Or how to replace the remote file? Buttons on my x96 box do not work correctly.

HERE

[Leiden]

bumerc

THANK YOU

[bumerc]

also don't werk ,nothing works through USB.

@ALL
USB port (OTG) trouble has been fixed. Wait for update!

OTG

[ 182.456056@0] usb 1-2: new high-speed USB device number 4 using xhci-hcd
[ 182.619087@0] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 182.688613@0] scsi host0: usb-storage 1-2:1.0

second

[ 126.692084@0] usb 1-1: new high-speed USB device number 3 using xhci-hcd
[ 126.838183@0] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 126.839962@0] scsi host0: usb-storage 1-1:1.0

[mick154]

Sounds like this ROM is not for you. Did you not read this line in first post: "volunteer testers for this," -- You tested it, ROM didn't work for you! So, go back to your original ROM. Thank YOU.

What's it got to do with you

[Leiden]

leiden@DESKTOP-B73QBA5:~/afck$ tar xfJ aml_upgrade_package.img.xz
tar (child): aml_upgrade_package.img.xz: Cannot open: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now

[bumerc]

Leiden
Please post the questions about bc-tool in the corresponding area. You must read the ReadMe.md file in the afck/bc-tool directory carefully before you start working on image. Why did you rename the image to a * .xz archive? This has nothing to do with normal aml format..

[bumerc]

@ALL
USB port (OTG) trouble has been fixed. Wait for update!
...

Realtek build is out, other builds will be updated in turn later
Good luck friends

[Falconyk]

Extract *.img and take what you need

HERE

I do not know what to take. I took the entire WIFI folder, did not work 6330 on another firmware

[bumerc]

You only need the 40183 firmware folder and dhd.ko from vendor/lib/modules. However, dhd.ko will not work with other kernels...