If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I didn't see the mark, my fault. I tried but always the same result Now i put down the procedure i'm doing, tell me if i'm doing something wrong.
1- Open usb burning tool, load the image (20170825.img located here http://freaktab.org/27~f ) and press start
2- while pins shorted insert the usb otg cable to pc
3- release the shorted pins when the tool recognize the box ( i also tried keeping the pins shorted but nothing changed)
Process always stops at 4% or 10% (error result or timeout error)
I didn't see the mark, my fault. I tried but always the same result Now i put down the procedure i'm doing, tell me if i'm doing something wrong.
1- Open usb burning tool, load the image (20170825.img located here http://freaktab.org/27~f ) and press start
2- while pins shorted insert the usb otg cable to pc
3- release the shorted pins when the tool recognize the box ( i also tried keeping the pins shorted but nothing changed)
Process always stops at 4% or 10% (error result or timeout error)
Forget your mod, try what i said. But, try this firmware https://chinagadgetsreviews.com/down...-tv-box-3.html. remember, stop shorted when the PC make the plug sound. Ohttps://chinagadgetsreviews.com/download-android-nougat-7-1-firmware-mecool-m8s-pro-plus-tv-box-3.html is the second USB, first you have SD slot, 1usb and then the second or the last USB
I have to use masked mode to even get my box detected
I use a home made usb cable, it is now less than 15 cm and it still won't work. Anything left for me to do?
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment