T95Q Amlogic S905X2 Android 8.1 4GB DDR4 64GB Dual Band WiFi LAN BT USB3.0

[vaah]

Someone who has done it recommends a version in a post above, are you using this version, I have had issues on other boxes being particular about version of USB Burning Tool

https://forum.freaktab.com/forum/tv-...628#post782628

I use usb burning tool 2.1.7.0 but I do suspect something is wrong with my cable. because I use a makeshift usb type A to type A i made on my own. So the sd-card method work. I just need to press the reset button hidden inside av port while powering the device on.

Now I'm planning to install twrp and install the stock remote patch.

[mojojojo67]

A new Android 9 rom by ALVATECH:
https://forum.freaktab.com/forum/tv-...9-0-pie-s905x2

Tested with my T95Q
everything works fine. ....
(use 95x2 rom)
only LED is always on, but who cares..

Patch for T95Q and X96Max to control the serial remote control ->
(install with TWRP )
https://drive.google.com/file/d/15W-...ew?usp=sharing

[abhi98228]

A new Android 9 rom by ALVATECH:
https://forum.freaktab.com/forum/tv-...9-0-pie-s905x2

Tested with my T95Q
everything works fine. ....
(use 95x2 rom)
only LED is always on, but who cares..

Patch for T95Q and X96Max to control the serial remote control ->
(install with TWRP )
https://drive.google.com/file/d/15W-...ew?usp=sharing

is it better than salvads rom?

[mojojojo67]

is it better than salvads rom?

give it a try and report...

[abhi98228]

give it a try and report...

you have tried both right? which rom you prefer?

[mojojojo67]

you have tried both right? which rom you prefer?

They are quite similar, so its up 2 u....

[kenduvernay]

They are quite similar, so its up 2 u....

What version of TWRP? I can't find any version that works on a Android 9 box.

[JBG]

A new Android 9 rom by ALVATECH:
https://forum.freaktab.com/forum/tv-...9-0-pie-s905x2

Tested with my T95Q
everything works fine. ....
(use 95x2 rom)
only LED is always on, but who cares..

Patch for T95Q and X96Max to control the serial remote control ->
(install with TWRP )
https://drive.google.com/file/d/15W-...ew?usp=sharing

Hi.
Can anyone explain, in a bit of detail, how to install the patch to solve the problems with the T95q serial remote control? I've tried to install it from TWRP, but the system does not detect the SDcard. Somewhere I've read that you have to go back to the original TWPR, but I have not been able to do it either. I'd be very grateful that someone put some clue in order to finish installing everything. Thank you.

[mojojojo67]

Hi.
Can anyone explain, in a bit of detail, how to install the patch to solve the problems with the T95q serial remote control? I've tried to install it from TWRP, but the system does not detect the SDcard. Somewhere I've read that you have to go back to the original TWPR, but I have not been able to do it either. I'd be very grateful that someone put some clue in order to finish installing everything. Thank you.

if u cant install with twrp just unzip the patch, then open the folder vendor/etc and copy the file "remote-mouse12.tab" to vendor/etc of ur root ( with a root browser).

[JBG]

if u cant install with twrp just unzip the patch, then open the folder vendor/etc and copy the file "remote-mouse12.tab" to vendor/etc of ur root ( with a root browser).

Thanks Mojojojo67. I've followed your instructions and I've get to install the patch. Now I'm going to test the TVBox T95q with Alvatech's firmware. In my first tests I saw that the ON button doesn't work very well.
Thank you very much for being so kind.

[mojojojo67]

Thanks Mojojojo67. I've followed your instructions and I've get to install the patch. Now I'm going to test the TVBox T95q with Alvatech's firmware. In my first tests I saw that the ON button doesn't work very well.
Thank you very much for being so kind.

ur welcome...

[raptur3d]

New Patch for T95Q and X96Max to control the serial remote control (Android 9 rom)->
(install with TWRP ) ->
new Patch
(turn the box off and on! )
with new bootloader, now the patch is complete...

(big tnx to sasvlad)

i flashed Sasvlad's ATV 2.0 Rom and remote patch.
all are working as stated.

i tried to fix the ON button for the stock remote.
i tried the SU command but it did not work for me.
what i did was, instal terminal and gave it root access.
execute the commands. execute successfully.
exit terminal, open xplore with root access.
verify /dev/block/bootloader but no change.
size and date remained untouched.

i tried to flash this full patch but when i got into TWRP the zip file is not showing in the sdcard folder.

what did i missed? thanks for your guidance!

[mojojojo67]

i flashed Sasvlad's ATV 2.0 Rom and remote patch.
all are working as stated.

i tried to fix the ON button for the stock remote.
i tried the SU command but it did not work for me.
what i did was, instal terminal and gave it root access.
execute the commands. execute successfully.
exit terminal, open xplore with root access.
verify /dev/block/bootloader but no change.
size and date remained untouched.

i tried to flash this full patch but when i got into TWRP the zip file is not showing in the sdcard folder.

what did i missed? thanks for your guidance!

just rename the "bootloader. img" (from sasvlad) to "bootloader" and copy to dev/block with a root browser.

[somenutter]

Hey guys, what is the best method for getting this box recognised in Windows ? no joy so far, I have ordered a new male to male cable just in case it's faulty, I doubt it, becuase this kind of issue has happened before with new retail cables on other boxes, are you guys using the power brick ? before i remember one problem was low power error on an older box I had.

[atlakeem]

Hey guys, what is the best method for getting this box recognised in Windows ? no joy so far, I have ordered a new male to male cable just in case it's faulty, I doubt it, becuase this kind of issue has happened before with new retail cables on other boxes, are you guys using the power brick ? before i remember one problem was low power error on an older box I had.

are you pressing the button inside the av jack with a toothpick? you have to press and hold while inserting the USB in USB1