Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

LOST DEVICA ID AND MAC TANIX TX5 MAX

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    LOST DEVICA ID AND MAC TANIX TX5 MAX


    LINK FOR LICENCE.ZIP
    Code:
    https://www.dropbox.com/s/7wy6t2bvkwccazd/tanx%20tx5%20max%20s905x432%20ACTIVATION%20TUTORIAL.zip?dl=0

https://www.dropbox.com/s/x2tdry5uo72phhp/USB_Burning_Tool_v2.1.7.0.zip?dl=0
    on stock roms is needed a device id that is generated from ETHERNET MAC ADRESS

    in zip we have:
    generator.txt <-script that wil generate device ID from MAC
    instruction.txt <- text tutorial
    licence folder <- to recover MAC and instal device id by USB burning tool




    IF YOU HAVE INSTALED ROM AND IT SHOWS YOU ACTIVATION MSG,

    you have 2 options, stay with the MAC of the ROM or change to your own which you can find on the bottom of the box(sticker)
    if option 1 THEN PRESS 758523 on remote control
    if it will show you mac and field for activation code, you can make steps 1-3 and put device ID into field and click SET

    if you try to restore mack you need to do ALL from tutorial


    1.go to https://ideone.com/

    2.erase all code in window and insert script from generator.txt (download and instal notepad ++ to have numered lines)

    !!!!!!!!!on line 263!!!!!!!!!!!!
    Code:
     System.out.println(new SyncTask().sync("01:01:03:04:05:06").substring(0, 8).toLowerCase());
    insted of 01:01:03:04:05:06-> we are adding MAC from sticker (YOUR MAC or MAC GENERATED FROM ROM... to check pres 758523 on remote)

    MIND SMAL AND BIG LETTERS, they wil generate diferent ID

    --- starting run-green button ----

    3. after site refresh on botom will be "stdout"... and its our DEVICE ID

    ( IF OPTION ONE JUST TYPE THAT ID TO ACTIVATION FIELD ON TVBOX)

    4. go to licence.zip, unpack it and open deviceid.ini

    Code:
    [Group1]
usid = 581c5d41(<--PUT YOUR CORRECT ID HERE  )


[Size]
Size = 8


[fragment]
fragment =
    save and close

    on 4pda is incorrect key....usid not deviceid

    5.open mac_ether.ini

    Code:
    [Group1]
start = 90:0E:B3:02:39:AF(<-your mac)
end = 90:0E:B3:02:39:FF (<-your mac with FF on last 2 place FF)
current = 90:0E:B3:02:39:AF
used = 0 (<-need to be 0)


[fragment]
fragment =
    save and close

    REMEMBER, LICENCE FILES NEET TO BE SAVE BEFORE LUNCHING BURNING TOOL

    INSTAL BURNING TOOL

    Code:
    https://www.dropbox.com/s/x2tdry5uo72phhp/USB_Burning_Tool_v2.1.7.0.zip?dl=0
    6.put licence folder witch deviceid.ini and mac_ether.ini into C:\Program Files (x86)\Amlogic\USB_Burning_Tool\
    folder licence need to be in burning tool catalog

    start tool USB_Burning_Tool.exe 2.1.7
    file>import img>TX5MAX_key.img
    then check erase flash/force erase all, erase bootloader,whether overwite key
    press start and plug box holding reset button,

    after succes we need to add ROM

    Code:
    [URL="https://chinagadgetsreviews.com/download-android-oreo-8-1-firmware-for-tanix-tx5-max-tv-box.html"]https://chinagadgetsreviews.com/down...ax-tv-box.html[/URL]
    you need to download STOCK ROM

    close burning tool and open it again one more time, then file> imput img>TANIX_TX5_MAX_20181226_CGR

    erase flash/normal erase, erase bootloader
    UNCHECK RESET AFTER SUCCESS AND UNCHECK WHETHER OVERRWRITE KEY
    press start and plug box holding reset button
    after success press stop unplug

    Have fun


    PS: ( PLEASE MOVE TOPIC TO FIRMWARE - ROMS - TOOLS)



    Last edited by meserak86; 06-04-2019, 19:37.
    Tags: None
    #2
    Please provide link for download licence key

    Comment

      #3
      license.zip

      source: 4PDA.ru
      Last edited by Guest; 10-15-2020, 03:50.

      Comment

        #4
        Thanks

        Comment

          #5
          generator.txt

          Originally posted by meserak86 View Post
          ...
          1.go to https://ideone.com/

          2.erase all code in window and insert script from generator.txt (download and instal notepad ++ to have numered lines)

          !!!!!!!!!on line 263!!!!!!!!!!!!
          Code:
           System.out.println(new SyncTask().sync("01:01:03:04:05:06").substring(0, 8).toLowerCase());
          insted of 01:01:03:04:05:06-> we are adding MAC from sticker (YOUR MAC or MAC GENERATED FROM ROM... to check pres 758523 on remote)

          MIND SMAL AND BIG LETTERS, they wil generate diferent ID

          --- starting run-green button ----

          3. after site refresh on botom will be "stdout"... and its our DEVICE ID
          ...
          Last edited by Guest; 10-15-2020, 03:43.

          Comment

            #6
            can someone post instructions.txt
            Last edited by tinboye; 04-12-2020, 18:30.

            Comment

              #7
              tinboye , burning tool is here, all needed files (license.zip and generator.txt) are still downloadable from posts above.

              Comment

                #8
                Originally posted by meserak86 View Post


                4. go to licence.zip, unpack it and open deviceid.ini

                Code:
                [Group1]
usid = 581c5d41(<--PUT YOUR CORRECT ID HERE )


[Size]
Size = 8


[fragment]
fragment =
                save and close

                on 4pda is incorrect key....usid not deviceid

                5.open mac_ether.ini

                Code:
                [Group1]
start = 90:0E:B3:02:39:AF(<-your mac)
end = 90:0E:B3:02:39:FF (<-your mac with FF on last 2 place FF)
current = 90:0E:B3:02:39:AF
used = 0 (<-need to be 0)


[fragment]
fragment =
                save and close

                REMEMBER, LICENCE FILES NEET TO BE SAVE BEFORE LUNCHING BURNING TOOL

                INSTAL BURNING TOOL

                Code:
                https://www.dropbox.com/s/x2tdry5uo72phhp/USB_Burning_Tool_v2.1.7.0.zip?dl=0
                6.put licence folder witch deviceid.ini and mac_ether.ini into C:\Program Files (x86)\Amlogic\USB_Burning_Tool\
                folder licence need to be in burning tool catalog

                start tool USB_Burning_Tool.exe 2.1.7
                file>import img>TX5MAX_key.img
                then check erase flash/force erase all, erase bootloader,whether overwite key
                press start and plug box holding reset button,

                after succes we need to add ROM

                Code:
                [URL="https://chinagadgetsreviews.com/download-android-oreo-8-1-firmware-for-tanix-tx5-max-tv-box.html"]https://chinagadgetsreviews.com/down...ax-tv-box.html[/URL]
                you need to download STOCK ROM

                close burning tool and open it again one more time, then file> imput img>TANIX_TX5_MAX_20181226_CGR

                erase flash/normal erase, erase bootloader
                UNCHECK RESET AFTER SUCCESS AND UNCHECK WHETHER OVERRWRITE KEY
                press start and plug box holding reset button
                after success press stop unplug

                Have fun


                PS: ( PLEASE MOVE TOPIC TO FIRMWARE - ROMS - TOOLS)


                I am getting the banner on top that says "The device is not activated yet, please contact your vendor!"

                I tried steps 1-3 and same results

                Starting with step 4
                [Group1]
                usid = e5dc69ff (mine)



                [Size]
                size = 8


                [fragment]
                fragment =

                Step 5
                [Group1]
                start = 06:61:81:21:73:47
                end = 06:61:81:21:73:ff
                current = 06:61:81:21:73:47 (what my sticker says on the bottom without the colons)
                used = 0



                [fragment]
                fragment =


                Step 6

                There was not a folder in my USB burning tool called "license"

                So I created a folder "license" to create the path C:\Program Files (x86)\Amlogic\USB_Burning_Tool\license

                I added the usid.ini and the mac_ether.ini to the license folder

                Then I opened USB buring tool v2.1.8

                Loaded the origingal TANIX_TX5_MAX_20181226.img

                Checked boxes for erase flash/force erase all, erase bootloader,whether overwite key

                Pressed "start" then plugged in my Tanix TX5 Max

                Received the green "buning successfully" at the end

                Stopped burning tool and closed. Removed USB cable and opened UBT again

                Loaded the origingal TANIX_TX5_MAX_20181226.img

                Just checked Erase flash/normal erase and Erase bootloader

                Start --> then plug in USB

                finished with green success.

                Still have the banner on top that says "The device is not activated yet, please contact your vendor!"

                Did factory reset and same thing

                What am I missing?


                Comment

                  #9
                  Originally posted by thevdoguy View Post
                  There was not a folder in my USB burning tool called "license"
                  ...
                  What am I missing?
                  license.zip https://siasky.net/_AbUpq-5hGORCqbrd...QFZzPxLks8ilXQ

                  Comment

                    #10
                    Originally posted by mAtvXk View Post
                    [ATTACH]n799778[/ATTACH]



                    link not work
                    "Invalid File Specified"

                    Comment

                      #11
                      Originally posted by Arthur View Post
                      link not work
                      Try again. ;-)

                      Comment

                      Previous template Next

                      What's Going On

                      Collapse

                      There are currently 3018 users online. 3 members and 3015 guests.

                      Most users ever online was 16,134 at 08:28 on 08-11-2023.

                      Working...
                      X

                      We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                      By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                      I Agree