[ROM] Ugoos X2 CUBE, PLAY and PRO ATV_by_Sasvlad ( AndroidTV 9.0 )

[mo123]

Finally got my box but I can't get the amlogic burning tool to detect my box. It works fine running Android Pie. But I want to flash this firmware.

I read the guide at the ugoos site. I also saw a video that showed I need to hold down the reset button when I boot the device to get it in the right
mode but that still doesn't do anything. I have tried on two win 10 machines and it won't work on either.

Can someone tell me the flashing process?

EDIT* I plugged in the hdmi and can see that I am in recovery mode, but it is not being detected.

Are you using a USB-USB cable connected to the side OTG port?
You have to press Start/Run in Amlogic burning tool then hold the reset button, connect the USB cable and then connect the power to the AM6.

[lightsout]

Are you using a USB-USB cable connected to the side OTG port?
You have to press Start/Run in Amlogic burning tool then hold the reset button, connect the USB cable and then connect the power to the AM6.

I am using otg. I'm pretty sure I tried that. Sounds like I need the hands lol. I'll give it a shot later today.

[lightsout]

Finally got installed with the SD card method.

[Sasvlad]

Updated: [ROM] Ugoos X2 Android TV by Sasvlad 0.3.4 DualBoot

[Billyxyz]

Hi Sasvlad, the Dual Boot feature on this ROM is great work! Would it be possible to extend the CoreELEC partition where the user is using a Pro (32GB) device? For example could a Pro version of the firmware be created with a 16GB/16GB partition split between CoreELEC & Android? For these 32GB devices it seems a shame to have so much space dedicated to Android and a much smaller partition available to CoreELEC. Thanks.

[Sasvlad]

Updated: [ROM] Ugoos X2 Android TV by Sasvlad v.0.3.6 (Dualboot and SingleBoot)

[Arthur]

<wiped out>

[RiCkLaR_atvX]

Can someone help me?

I tested other rom and noticed that my mac has been changed to 02: 00: 00: 00: 00: 00. Please help me!

Very RUDE to ask in several different custom ROM thread the Same question over and over, ask in the Proper forum thread that pertains to your exact ROM installed or your specific Device thread.

[Arthur]

Very RUDE to ask in several different custom ROM thread the Same question over and over, ask in the Proper forum thread that pertains to your exact ROM installed or your specific Device thread.

Sorry, I'm desperate I don't want to lose my box, in all the topics I asked I already used the respective rom. Sorry!

[kiboy6]

Thanks so much for this awesomeness. I am about to order an Ugoos X2 or X3 because of the possibility this firmware provides to dualboot seamlessly between ATV and CoreElec.

Just wondering for such a setup (and a Kodi library of maybe 1000 movies and 1 or 2000 TV eps) would one of the 2GB + 16 GB Ugoos boxes be sufficient or would one of the 4GB ram models (with 32 or 64 internal) be preferable?

Thanks very much!

(Posting the same question in the X3 ATV Rom thread too - any major performance diff between X2 and X3 ?)

[Junoxe]

Just wondering for such a setup (and a Kodi library of maybe 1000 movies and 1 or 2000 TV eps) would one of the 2GB + 16 GB Ugoos boxes be sufficient or would one of the 4GB ram models (with 32 or 64 internal) be preferable?

Hi, i use X2 2/16 and have no issues with large library (movies, series and music). And no issues with 1080p movies. I use CE for watchin and listening. Also i use Android for HBO GO. All work smooth.

[kiboy6]

Hi, i use X2 2/16 and have no issues with large library (movies, series and music). And no issues with 1080p movies. I use CE for watchin and listening. Also i use Android for HBO GO. All work smooth.

Many thanks for the feedback Good to know.

[anteros]

Can someone extract the launcher and upload it to the mega.nz?

I like this hybrid with leanback laucher and Nav & status bar.

I need to install the launcher to x96s and a95x max.Any issues?

thanks.

[mo123]

Can someone extract the launcher and upload it to the mega.nz?

I like this hybrid with leanback laucher and Nav & status bar.

I need to install the launcher to x96s and a95x max.Any issues?

thanks.

You can't install the launcher on stock Android since it needs AndroidTV firmware.
If you are lucky enough to have an AndroidTV firmware for your device, the same launcher will be default anyway.
The navigation bar is because of changes in the firmware, nothing to do with the launcher app.

[anteros]

You can't install the launcher on stock Android since it needs AndroidTV firmware.
If you are lucky enough to have an AndroidTV firmware for your device, the same launcher will be default anyway.
The navigation bar is because of changes in the firmware, nothing to do with the launcher app.

Thanks mo123,

You're always so helpful.

I did flashed a rom with Nav & Status bar.

And I installed that rockchip ATV style launcher with mouse capabilities on S905Y2,everything works fine.
But only I don't like it's color.

What I really want the most is the A95x max+' launcher,but it's Android 9,I used Amlogic cutomization tool to extract the stock firmware,but empty in the system folder.
The customization tool is too old not updated by Amlogic anymore.

Any ideas where I can get this launcher?

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s922x/782801-a95x-max-plus-amlogic-s922x-4gb-ram-64gb-rom-android/page2

https://i.imgur.com/zYXXJ3I.png