X96 Air Amlogic S905X3 Android 9.0 Media Player

[webipsum]

Friends, good morning.
Please, what is the operating temperature of X96 Air S905X3?:
1) with original firmware?:
2) with another firmware (type SLIMBOX)?:
Thank you.

[Atvx96air]

Hi,

I use stockrom and now slimbox V8 rom no problèm and box colder now I will look the température info and Come back after

[webipsum]

Hi,
I use stockrom and now slimbox V8 rom no problèm and box colder now I will look the température info and Come back after

Atvx96air

• Temperature... No problem, I wait.
• Which launcher do you use?
• Can you use widgets?
• Do you use voice command?

Thank you.

[Atvx96air]

60°C Never problèm during expérience i use slimbox V8 rom its nice rom

[SAK69]

HI, i have x96 air 4/32GB, When i got its play store and Bluetooth is not working.
To get rid of this problem i finally decide to install costume ROM and that was with Ver(X96Air_P1_20191017-1536).
After the installation my device configuration change to 2/16GB .
But after that play store is working and Bluetooth is still not working.
SO plz plz plz help me out how to restore my device configuration which was 4/32GB and
which custom ROM should i install which support play store and Bluetooth working as well.

plz any guru, plz help me out.

[billouetaudrey]

I don't know SAK69, on mine, it write P3 on build number

[issam_isl]

Hi SAK69,

First X96Air_P1_20191017-1536 ROM is not a custom ROM, it's the official stock ROM of X96Air P1 version.
Second, if after flashing the stock ROM on your box you find different RAM and flash ROM that means that your box is fake and that's the correct ROM and flash ROM that exist on your box.

Sorry for you.

[Uncle Jed]

I have the X96 Air P3 version from Geekbuying, it just recently updated its firmware via the factory included “FOTA Update” app… firmware updated to (1) optimize and (2) fix bugs!
Original firmware version was... X96Air_P3_20200619-2008
New firmware version is... X96Air_P3_20200831-1753
I noticed update was available on about Sept 10, 2020 so I believe this one was released on Aug 31, 2020. You could check to see if an update is available... it may solve your issues!

[kruegerfree]

HI all , i have x96 air P3 4/32GB. I tried 2 cameras with various programs. not work USB cameras .. what can I do? or which cameras are compatible.

my firmware X96Air_P3_20200831-1753

[Uncle Jed]

I’m using the Dafang 1080p WiFi cam with the Elias Kotlyar hack from Github and a newer version of TinyCam Pro on my X96-Air... it works quite well! Good picture, motion control, sound! As for USB, like an endoscope cam, I’ve used a few programs like CameraFi and OTG SEE with a Samsung Galaxy S3 and an LG G3 and they worked OK but were somewhat sketchy! On one endocam I had to shorten the cable down to about 6 feet for it to work! Also, you may have to use an OTG USB cable or adapter.

For WiFi in TinyCam --> settings/Video Settings/H.264 H.265 decoder... select Hardware+

Then add IP camera, NVR/DVR

Camera Brand: Xiaomi

Camera Model: Dafang

Hostname/IP address: 192.168.2.xxx (get your cameras IP address from your router or from a program like Wireless Network Watcher)

Web Port Number: 443

Protocol: RTSP over TCP (MPEG/H264/H265)

RTSP port number: 8554

Use HTTPS: yes

Add the cameras Username and Password

Then scroll to top of that page, click Camera Status to verify the settings are correct.

Hope that helps!

Ps... with new 12V 92mm fan running at 5V (quiet!) added to stock heat-sink setup, idle temp @ 38C, full load stays under 60C! Loving it!

[yan2]

4pda has a permanent TWRP for the X96 Air, however due to Russian language i am not able to login.
Can someone please upload it here?

[mAtvXk]

4pda has a permanent TWRP for the X96 Air...

Link, please.

[yan2]

Link, please.

Sorry...
Post is here:
https://4pda.ru/forum/index.php?show...st&p=100719880

"Mod TWRP_3.3.1 ??? ???????? ? ???????"

Thank you very much!

[mAtvXk]

Post is here:
[4PDA.ru]

Mod TWRP_3.3.1 for firmware to the system:
recovery.img (23,19 MB)

[yan2]

Mod TWRP_3.3.1 for firmware to the system:
recovery.img (23,19 MB)

Thank you very much!