If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
A95X F3 Amlogic S905x3 8K Video Decode Android 9.0 TV Box RGB Light 4GB/32GB
Thanks for detailed reply. I installed check root and it said SuperSU 2.76. So I installed SuperSU 2.76 apk it still asked for update root binary. I say no. And it still works, gives prompt now. Why it still needs update?
Because app probably is calling the API to see what version is the most current release of SuperSU and trying to get you to update, just never do it.
Can I disable update prompt?
The prompt in Notifications can be disabled by turning of Notifications for SuperSU apk, this will stop the prompt from putting the SuperSU symbol in status bar, and it App will still work correctly when it needs to show prompts, but the Update prompt will always show when the SU app is opened directly so be careful when opening SuperSU.
And I was scared to reboot with SuperSU installed, would it cause bootloop?
If you checked "ON" the settings that I mentioned in last reply then you will be fine.
Sidenote: Another thing I do after adding SuperSU.apk is update the BusyBox binary with Stericson's latest version.
Hello Friends
i recently bought this box. Its an excellent box but i i r into issues when i tried installing Magisk. Box went into boot loop. I do not have the stock firmware. I tried using other S905X3 firmware but Amlogic USB tool gets stuck at 1% DDR Download with errors. Really need help to get stock firmware for this unit. Please help
I had same problem. uncheck the erase rom of usb burning tool. this will clear the problem.
If you run a "Check Root" app and it says the Root binary is SuperSU 2.72, then you can install SuperSU app to control the popups that allow/deny Root access to apps. The one problem is that the SuperSU app is 2.81 version and it will always ask for you to update its binary, which you can never do or it will brick your device.
I didn't buy this device because of the fact of it having DDR3, but with my experience with other Amlogic devices most all generally use the SuperSU 2.72 binary and you can install the SuperSU app.
Note: if SuperSU apk installs correctly then first thing is go directly to settings and "allow system apps Root access" and "allow Root acces at start-up" both of which are 2 check boxes in the settings.
Thanks for detailed reply. I installed check root and it said SuperSU 2.76. So I installed SuperSU 2.76 apk it still asked for update root binary. I say no. And it still works, gives prompt now. Why it still needs update? Can I disable update prompt? And I was scared to reboot with SuperSU installed, would it cause bootloop?
I know how to turn off root. I ask if it is possible to leave root on and to have a popup asking "do you want to grant root access to this app?" Right now, any app is granted root access without asking user.
If you run a "Check Root" app and it says the Root binary is SuperSU 2.72, then you can install SuperSU app to control the popups that allow/deny Root access to apps. The one problem is that the SuperSU app is 2.81 version and it will always ask for you to update its binary, which you can never do or it will brick your device.
I didn't buy this device because of the fact of it having DDR3, but with my experience with other Amlogic devices most all generally use the SuperSU 2.72 binary and you can install the SuperSU app.
Note: if SuperSU apk installs correctly then first thing is go directly to settings and "allow system apps Root access" and "allow Root acces at start-up" both of which are 2 check boxes in the settings.
A95X is suppose to have ROOT SWITCH in settings, must manually select, so to turn Off Root access you must activate switch to Off position then click for Restart the device. After restarting the device you will have Root access turned Off if the firmware is functioning correctly. If Restart button is not in "About device" Settings then you must install Terminal app and type reboot then press ENTER for proper Restart function.
I know how to turn off root. I ask if it is possible to leave root on and to have a popup asking "do you want to grant root access to this app?" Right now, any app is granted root access without asking user.
Hallo from Slovenia. I have problem with this box . I do not use Bloototh, also no connection on BT. But box have problem with BT and wrote that have problem with BT program and that they start and stop many times. Than i can stop this BT aplication. But i check all, is some possibility to permanent stop BT app. ? I have last firmware !
Sorry for my English it is not my native language.
Hallo from Slovenia. I have problem with this box . I do not use Bloototh, also no connection on BT. But box have problem with BT and wrote that have problem with BT program and that they start and stop many times. Than i can stop this BT aplication. But i check all, is some possibility to permanent stop BT app. ? I have last firmware !
Hello guys, is it possible to adjust root settings, right now it auto grants root permission, doesn't ask user, no popup?
A95X is suppose to have ROOT SWITCH in settings, must manually select, so to turn Off Root access you must activate switch to Off position then click for Restart the device. After restarting the device you will have Root access turned Off if the firmware is functioning correctly. If Restart button is not in "About device" Settings then you must install Terminal app and type reboot then press ENTER for proper Restart function.
Well according to the Picture Grayman posted, the more premium F3 has a completely different Storage module chip, eMCP is not same as eMMC and so each device will need its own unique firmware to match the hardware.
You may right as i tried almost 4 different Firmware but no luck.
Thanks Dear,
My unit only reads as A95X F3. I might as well try that as i have nothing more to lose.?
Well according to the Picture Grayman posted, the more premium F3 has a completely different Storage module chip, eMCP is not same as eMMC and so each device will need its own unique firmware to match the hardware.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Leave a comment: