Announcement

Collapse
No announcement yet.

H9 X3 Bricked Dead (SOLVED REVIVED)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • marine_tugah
    replied
    Originally posted by ath156 View Post

    So the solution was at a another topic (and in the wrong section about S905X2 and not S905X3 !!!!)
    Thanks I will try again today and give feedback!

    Leave a comment:


  • ath156
    replied
    Originally posted by Shark91n View Post

    WOOOOOOOW; it solved my problem. thanks a looooooot Ath156. your rom has unbrick my H9 _ https://drive.google.com/file/d/1u61...4EwYoOw9X/view
    marine_tugah use Ath156 rom; you dont even need to short pin it. just use usb tools 2.1.7 and that rom; and all worked

    thanks again ath156
    So the solution was at a another topic (and in the wrong section about S905X2 and not S905X3 !!!!)

    Leave a comment:


  • marine_tugah
    replied
    Please guys can some one help me? I made a video of my process i tried short pins method. can you please share a video os your own?

    Leave a comment:


  • marine_tugah
    replied
    is there anyone there?

    Leave a comment:


  • marine_tugah
    replied
    I made all the stup in this fotrum still mo luck anyone can help?

    Leave a comment:


  • Shark91n
    replied
    Originally posted by MartaN View Post
    tested on bricked dead H9X3 4/64
    fw H9X3_4_64_800M_20200610_1308
    B.tool v2.2.0

    Method:
    1. open tool import image
    2. uncheck erase bootloader
    3. click START
    4. Short the two gold point
    5. Connect USB Kabel to PC. Wait until the computer recognize the box
    6. Remove shortcut
    4. Flash enjoy
    i have tried your method; now my device does not start at all. black screen. usb tools stops at 7 diskinitial error. i have tried different rom; different PC; no chance

    Leave a comment:


  • Shark91n
    replied
    Hello everyone
    i have used the same rom on 3 devices H9, 1 is worked and 2 others stops at 7% diskinitial error. Any help?
    Usbtools 2.2 and 2.1.7 , 2.1.9 not worked
    Tried different roms x3, no chance

    Leave a comment:


  • MartaN
    replied
    tested on bricked dead H9X3 4/64
    fw H9X3_4_64_800M_20200610_1308
    B.tool v2.2.0

    Method:
    1. open tool import image
    2. uncheck erase bootloader
    3. click START
    4. Short the two gold point
    5. Connect USB Kabel to PC. Wait until the computer recognize the box
    6. Remove shortcut
    4. Flash enjoy
    Attached Files
    Last edited by MartaN; 07-18-2020, 01:54.

    Leave a comment:


  • gefattern
    replied
    Originally posted by polymar79 View Post
    Hi, I have the same problem. Someone can tell me which pins I have to short? I don't see previous images
    Hi ,

    Pin 7&8 , i think , but only if your Nand has this soldered Pins , Pictures of PCB , both sides would be good ,

    greetings / gefattern

    Leave a comment:


  • polymar79
    replied
    Hi, I have the same problem. Someone can tell me which pins I have to short? I don't see previous images

    Leave a comment:


  • nikos17m
    replied
    Originally posted by ath156 View Post

    Very nice !!!!


    thanks for your time and tips

    Leave a comment:


  • ath156
    replied
    Originally posted by nikos17m View Post
    Yes the gold pins
    Very nice !!!!

    Leave a comment:


  • nikos17m
    replied
    Yes the gold pins

    Leave a comment:


  • RiCkLaR_atvX
    replied
    Originally posted by nikos17m View Post
    I manage to save the board
    the short pin location is the 2 pins marked in the photo
    The GOLD pins correct?

    Leave a comment:


  • nikos17m
    replied
    I manage to save the board

    the short pin location is the 2 pins marked in the photo

    Leave a comment:

Working...
X