A95X F3 Bricked only red light

[dex986]

Hello to everybody,
I used the Burn card and insert the rom. Can't turn on. Only the red light remained. Tried flash with USB Burning Tools - stopped at 1%
I try USB -A to USB- A , reset button but nothnig.


any help would be great

thank you all
regards

[Gante]

And you inserted at to the flash firmware password.bin?
If so, try another firmware.

[dex986]

And you inserted at to the flash firmware password.bin?
If so, try another firmware.

Please, how do I find password.bin? Can you send instructions?
I try firmware : A95X_F3_20191017senk.img and A95X_F3_AIR_20191024senk.img
Is there a possibility of a short pin method? Thanks

[Gante]

Step 1:

Connect the box to the PC /usb - usb/ and install Usb burning Tool 2.1.7.0.
/is in the folder rar/
All! Drivers included.

https://drive.google.com/file/d/1Ek3YS2CrBT5eM83tgDd9cZI1B-kdgZXQ/view

Then disconnect the box from the PC.


Step 2:
Run the Usb Burning tool and connect box. You'll see right away if he joins. If so, disconnect the box, if not, repeat step 1.


Step 3:
The box is disconnected from the PC!!!!!

Start the Usb Burning Tool and first enter the password.bin according to the picture in the folder.
Then load the firmware and enter Erase All on the right.
Then click START!
Connect the box to the PC / usb - usb / and the firmware will start loading.
If not, start all over again from step 1.


That is all.

[Gante]

P.S. If you have F3 RGB Light, don't put Air firmware there!

[dex986]

Step 1:

Connect the box to the PC /usb - usb/ and install Usb burning Tool 2.1.7.0.
/is in the folder rar/
All! Drivers included.

https://drive.google.com/file/d/1Ek3YS2CrBT5eM83tgDd9cZI1B-kdgZXQ/view

Then disconnect the box from the PC.


Step 2:
Run the Usb Burning tool and connect box. You'll see right away if he joins. If so, disconnect the box, if not, repeat step 1.


Step 3:
The box is disconnected from the PC!!!!!

Start the Usb Burning Tool and first enter the password.bin according to the picture in the folder.
Then load the firmware and enter Erase All on the right.
Then click START!
Connect the box to the PC / usb - usb / and the firmware will start loading.
If not, start all over again from step 1.


That is all.

Thanks man. You saved my box . I owe beer . I would just add that when the installation starts, turn on the power adapter. Thanks again.

[dex986]

P.S. If you have F3 RGB Light, don't put Air firmware there!

I have A95x F3 Air with rgb light. With you instructions my box working. Maybe something wrong?

[Gante]

The procedure is the same. That's all I can advise. Regards.

[cikkucippic]

Always make sure, you enter the “ password.bin” into the burning tool, otherwise, burning will stop !
The password bin comes along with the official ROM only !

[dex986]

Always make sure, you enter the “ password.bin” into the burning tool, otherwise, burning will stop !
The password bin comes along with the official ROM only !

Can use password.bin when install custom rom?

[cikkucippic]

Can use password.bin when install custom rom?

In order to make a good burn , I had to input the “ password.bin” supplied by the seller . You will fnd it in “ view” of the settings in version 2.7

Make sure the temperature , in “ view” settings, is off. If persists, I had to turn my ac on cool 16c with a fan directed on the box.

when I burn a new rom, even the same rom again, I always uninstal and re instal the tool, to clear cache

good luck

[dex986]

In order to make a good burn , I had to input the “ password.bin” supplied by the seller . You will fnd it in “ view” of the settings in version 2.7

Make sure the temperature , in “ view” settings, is off. If persists, I had to turn my ac on cool 16c with a fan directed on the box.

when I burn a new rom, even the same rom again, I always uninstal and re instal the tool, to clear cache

good luck

Recommendation for custom rom. Link? Thank you

[Guest]

Recommendation for custom rom...

SLIMBOX X3 (ver 5.1) ATV and AOSP for ...

Magicsee N5 Max X3
Tanix TX3 X3
X88 Pro X3 (non-encrypted), X99 Max Plus, Transpeed X3 Plus (UBT)
X96 AirX3 P1 P2 P3 V2
X96Max Plus
T95Q, X96Max S905X2
HK1 Box, VONTAR X3, Transpeed X3 Air, H96 MAX X3
A95X F3, F3 Air, F3 Slim
Beelink GT1 Mini2 v204P0
Beelink GT1 Mini 007P0 lp (first revision)
Beelink GT1 Mini 007P0 nlp (second revision)
X88 King (UBT)

[cikkucippic]

Recommendation for custom rom. Link? Thank you

My unstable A95X F3 S905x3 RGB box was solved:

1. Complete re install the factory firmware : https://drive.google.com/u/0/open?id...fhnHGCidYS6CA8
2. Do not open, update, or install “ MOBDRO” app
3. Go straight to very recent online update to : A95X_F3_AIR_M_9.0.0-202003090926
4. After update, go to settings > screen resolution , remove auto select and select a proper screen resolution, according to your tv. This was causing much instability, together with over heating.

So far, after a few days, the box is working very good , but, with an external flying mouse. DO NOT TRY TO DOWNLOAD OR OPEN “MOBDRO “ APP

[Lawrence jd]

i have x88 pro stuck on red light and my PC won't recognized... any help please